BD-FS-41B Optical Fiber Fusion Splicer
BD-FS-41B Optical Fiber Fusion Splicer,
four motors, high splice presion,
small size, light weight, high reliability,
dust-resistant, water-resistant and shock-resistant,
can replace fujikura fusion splicer 70S
BD-FS-41B Optical Fiber Fusion Splicer is small size optical fiber fusions splicer, mainly used for fusion and protection of common communications fibers. The rich functionality and ultra-low splice loss make the splicer adaptive to fiber splicing in various environments. It is featured with small size, light weight, high reliability, greater environmental adaptability, dust-resistant, water-resistant and shock-resistant. Multiple fusion modes and heating modes are available to meet diversified customers’ demands. Fiber loading becomes more convenient and accurate thanks to the ceramic V-groove of high precision, which is easy for clean and maintenance. The splicer is capable of dual-directional fusion. The monitor is a touch screen delivers fresh designed graphical interfaces, which are simple for operation. The modular pluggable lithium-ion battery of large-capacity ensures long-time field operations. The auto environment compensation system greatly improves adaptability of the splicer to hostile environments, so that low-loss splice can be remained consistent in various environments.
BD-FS-41B Optical Fiber Fusion Splicer
Cladding alignment, manual alignment
|Applicable fibers||Any common optical fibers, rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653, ITU-TG.655 and ITU-TG.657.|
|Optical fiber diameter||Cladding: 80～150μm, coating layer: 0.1～3mm|
|Cleave length||5～16mm（coated optical fiber diameter≤250μm）；10mm（coated optical fiber diameter：0.25~3mm）|
|Splice loss（typical）||0.02dB（SMF）; 0.01dB（MMF）; 0.04dB（DSF）; 0.04dB（NZDSF）|
|Return loss||Better than 60dB|
|Splicing time (typical)||7s (Fast mode)|
|Heating time (typical)||18s（60mm protection sleeve）|
|Protection sleeve||60mm, 40mm and a series of protection sleeves|
|Graphical display||High-performance 4.3 inch LCD|
|Magnification time||320 times/88 times, 700times|
|Fusion records||10000 groups|
|Battery capacity||11.1V, 5200mAh|
|Battery service life||Cycle charging: 300～500 counts, can be replaced by customers|
|Electrode service life||Typical: 4000 counts, can be replaced by customers|
|Construction lighting||Built-in lights with high-brightness and wide lighting area|
|Working environment||Temp:-10～50℃；Hum: 0～95%RH，height above sea level: 0～6000m|
|Operation interfaces||GUI (graphical user interfaces)|
|External power||AC: 100～240V, 60Hz, 0～1.5A; DC: 10～15V|
|Port||USB / SD|
|Dimensions||120mm（W）×130mm（H）×154mm（D）（without rubber anti-vibration pad）|
|Weight||1.8kg （the battery not included）, 2.1kg（included the battery）|
BD-FS-41B Optical Fiber Fusion Splicer is compact equipment deploying the design of ergonomics, which delivers convenient operation and handy carrying case. Event very short fibers can be spliced easily. It’s capable of construction and maintenance of optical fiber line projects (including trunk), emergency repair, production and test of optical fiber devices and research and study in institutes.
Main Unit: BD-FS-41B Optical Fiber Fusion Splicer
|1||Power cord||Standard tri-prong cord: 1 pc|
|2||Primary coat stripper||1 pc|
|3||Jacket remover||1 pc|
|4||Spare electrode||1 pair|
|5||Cooling tray||1 pc|
|6||Cleanup set||1 set|
|7||User Manual||1 copy|
|8||carrying case||1 pc|
1.Can the fiber fusion splicer work on 4000-5000meter attitude ?
Yes, the fiber fusion splicer is military grade fiber fusion splicer which can work well on 5000meter attitude.
The customer must perform arc calibration firstly. The fiber fusion splicer machine will record this parameter after calibration, and it will work normally.
When return to normal sea level attitude, please do the arc calibration again, the splicer machine will return to normal parameters.
2.Could you do OEM for us?
yes, we can do artwork including printing, logo etc. for you, the device will with your LOGO on fusion splice case.
3.How can we place order?
After we made agreement on the product’ parameters, we will make proforma invoice for your confirmation.when we got your advance payment (deposit) we will arrange the production and delivery.
If you have your own ship forwarder, we will use your ship forwarder to delivery goods. if you don’t have ship forwarder, then when the goods arrived at Destination port, you must find a ship forwarder help you clear the custom.
4.How about the shipping?
For small orders, we will send the goods by International Express like HK Fedex, DHL, TNT or UPS. usually it takes about 7work days to arrive.If big quantity we will ship by Ocean transportation, it takes one month to arrive. if urgnet, you can select shipping by Air, but freight charge will be more expensive.
5.what’s your products’ advantages ?
A. good quality and competetive prices.
B. Strictly quality control when producing.
C. Professional team work, from design, development, producing,assemble,packing and shipping.
D. Aftersale services, if there is quality problem, we will offer you replacement for defective quantity.