BD-LMXE.VI Mini SDH Multiplexer

BD-LMXE.VI Mini SDH Multiplexer

Short Description:

BD-LMXE.VI is a carrier-class, cost-effective, compact (only 1U high), STM-1/STM-4 SDH/MSPP platform that is designed for application in metro and access networks to facilitate the efficient transport of traditional TDM and emerging data traffic for service providers.


  • Payment Terms: Paypal,western union,L/C,D/A,D/P,T/T
  • Description

    Specification

    Application

    Order information

    Questions&Comments

    Product Tags

    Product Overview

    BD-LMXE.VI is a carrier-class, cost-effective, compact (only 1U high), STM-1/STM-4 SDH/MSPP platform that is designed for application in metro and access networks to facilitate the efficient transport of traditional TDM and emerging data traffic for service providers.BD-LMXE.VI is a card based compact SDH equipment, designed mainly as a gateway node between the core SDH network and a number of remote CPE boxes. It may also be used as a multi service SDH ADM node in a typical ring or mesh network.BD-LMXE.VI has 8 slots, with 2 slots for the DC (1+1)/AC power supply, 1 slot for network management & cross-connection card, and 5 slots left for services (STM-1/4, Ethernet, E1, E3/DS3, V.35 Etc.).BD-LMXE.VI supports multiple SDH network features as follows:

    •    Support 1+1 MSP, SNCP protection
    •    Management channel can be DCC/E1/VC12
    •    Support up to STM-4
    •    E1 BERT test is embedded
    •    Internal clock/external clock/line clock/clock holdover
    •    Ethernet service supporting GFP encapsulation, VC12 virtual concatenation and LCAS, P VLAN, 802.1Q VLAN and QinQ
    •    64 remote site’s Ethernet over 8*E1 aggregation
    •    252 remote site’s Ethernet over 1*E1 aggregation
    •    64 Ethernet over SDH aggregation

    BD-LMXE.VI supports the following services on different ports:

    • STM-1o/STM-4
    • GE/FE (Optical and Electrical)
    • E1/V.35/E3/DS3

    Index

    Performance Parameter
    SDH/PDH Interface Max STM-1 2 aggregation + 14 tributary STM-1 optical interfaces (Can be SFP)
    STM-4 2 aggregation + 4 tributary STM-4 interface, SFP
    Connector SC/PC or FC/PC or SFP
    Spec. S-1.1, S1.2, L-1.1, L-1.2, S4.1, S4.2, L4.1, L4.2
    Single fiber bi-directional interface can be optionally supported

    Service Card

    Compatible with BD-LMXE.V2/V8E
    PDH interface Max E1 60*E1s
    Max E3/DS3 5*E3/DS3
    Ethernet Interface 10/100/1000Base-Tx or 100/1000Base-Fx, Comply with IEEE 802.3

    Max FE

    20*FE, 4*GE
    Encapsulation Comply with ITU-T G.7041 (VCAT, GFP, LCAS)
    V.35 Max Interface 10*V.35 interfaces (framed or unframed) DCE/DTE
    Management Interface 10/100 Base-T (can be cascaded)
    Physical Dimension(H/D/W) 1U: 44 × 248 ×444 (mm)
    Power

     

    Supply -48V DC / 220V AC / 12V DC
    Consumption

    ≤90W

    Environment

     

    Temperature -10°C~50°C
    Humidity ≤95 %(non-condensing)
    Weight (full-load) ≤5KG
    Integrated Services Access

     

    10

    Items Standards and Protocols

    SDH Interface

    ITU-T G.957, G.707
    E1/E3/DS3 interface ITU-T G.703, G.704
    Clock interface ITU-T G.823
    Ethernet interface IEEE 802.3 recommendations
    2Mbit/s, 2MHz clock interface G.823
    SDH Clock G.813, G.825, YDN121-1999, YDN123-1999
    Network Management G.784, G.831, Q.811, Q.812, M.3100, M.3000
    Service Protection G.841, G.842
    Built-in E1 BER Tester O.150

    Related Products