SDH multiservicio / multiplexor MSTP

SDH multiservicio / multiplexor MSTP

Breve descripción:


  • Condiciones de pago: Paypal, Western Union, L / C, D / A, D / P, T / T
  • Descripción

    Especificación

    Solicitud

    Información del pedido

    Preguntas y Comentarios

    Etiquetas de productos

    BD-MUX04-LMXE+ is a carrier-class, cost-effective, compact (only 3U high), STM-1/STM-4/STM-16 SDH/MSTP platform that is designed for application in metro and access networks to facilitate the efficient transport of traditional TDM and emerging data traffic for service providers. It is derived from BD-MUX04-LMXE. The difference is that, BD-MUX04-LMXE+ has PCM function and interfaces while LMXE has only SDH and PDH interfaces.
    BD-MUX04-LMXE+ is a card based compact SDH equipment, designed mainly as a gateway node between the core SDH network and a number of remote CPE boxes. It may also be used as a multi service SDH ADM node in a typical ring or mesh network. The 3U high 19” wide chassis of the BD-MUX04-LMXE+ has 19 slots, with 2 slots for the 1+1 power cards, 1 slot for network management card, 2 slots for aggregation(uplink) cards, and 14 slots for service(downlink) unit cards.
    Uplink cards support STM-16/STM-4/STM-1 optical interface and STM-1 electrical interface. Service cards support E1/V.35/E3/DS3/FE/GE/FXO/FXS/4W/E&M/OW/RS-232/V.24/ RS-422/485/V.11.
    caracteristicas:
    1.         Support up to STM-1/STM-4/STM-16
    2.         SDH/PDH/PCM all integrated
    3.         Large cross-connect matrix capacity is 96*96 high order VC-4 cross connection or 2016*2016 VC-12 or 96*96 VC-3 level full cross connection
    4.         Support 1+1 MSP, SNCP protection
    5.         Management channel can be DCC/E1/VC12
    6.         Clocking mode supports:  internal clock / external clock / line clock / clock holdover
    7.         Ethernet service supporting GFP encapsulation, VC12 virtual concatenation and LCAS, P VLAN and 801.1Q VLAN
    8.         E1 BER tester is embedded
    9.         Support up to 110 Ethernet over 8*E1 (EoPDH or EoE) remote CPEs
    10.     Support up to 756 Ethernet over 1*E1 (EoPDH or EoE) remote CPEs
    11.     Support up to 110 Ethernet over VC-12 (EoSDH or EoS) remote CPEs
    12.     Online upgrading
    13.     Full redundancy design

    Technical specification:

    Cross-connection capacity STM-1: 20 x 20 VC-4s, 60 x 60 VC-3s, 1260 x 1260 VC-12sSTM-4: 32 x 32 VC-4s, 96 x 96 VC-3s, 2016 x 2016 VC-12s

    STM-16: 96 x 96 VC-4s, 96 x 96 VC-3s, 2016 x 2016 VC-12s

    Cross-connection direction Group to tributary, tributary to group, group to group, tributary to tributary, internal 64 kbit/s timeslot cross-connection of PCM cards
    Cross-connection mode bidirectional, unidirectional, multicast/broadcast and loopback
    Optical protection capability SNCP for VC-12, VC-3, and VC-4 services (Protection switching is implemented within 50 ms)Linear 1+1 MSP, two-fiber unidirectional MSP at the STM-1 and STM-4 levels
    Power redundant supply Two power cards work in 1+1 backup mode.

    NM channel

    External DCNDCC NM channel: select any group from D1-D3, D4-D6, D7-D9, and D10-D12

    E1 NM channel: assigned to any VC-12 of the cross-connection card or STM card, or E1 port on the E1 interface card.

    EoE in-band NM channel

    N*64 kbit/s in-band monitoring

    Monitoring channels of PCM cards (Sa in-band monitoring)

    E1 protection capability

    Support 1+1 protection between any two E1 and 56 pairs protection can be configured at most

    Chassis dimention (W x D x H)

    440mm×280mm×130mm

    Power supply

    DC power supply: -48 V DCAC power supply: 220 V/110 V AC

    Maximum Power Consumption

    Typical application: ≤85W

    Operating environment (temperature, humidity)

    -15°C ~ +55°C, 0-95%RH (non-condensing)

    Storage environment(temperature, humidity)

    -40°C ~ +105°C, 0-95%RH (non-condensing)
    EoE aggregation

    EoS aggregation
            PCM/SDH integration
    Información del pedido
    Card/Module Name
    Card/Module Type
    Descripción
    Main Chassis (Including Backplane)
    LMXE+.BOX 19″, 3U,with 2 Power Slots,1 Network Management Slot, 2 Aggregation Service Slots, 14 Tributary Service Slots
    DC Power Card
    LMXE.PWR01 DC -48V Power Supply, Can be 1+1
    AC(220V) Power Card
    LMXE.PWR02
    AC 220V Supply, Can be 1+1
    Network Management Card
    LMXE.NM02
    Network Management Card with 2 RJ45 Management Ethernet Ports, Supporting Online Upgrading
     Aggregation Card  with Dual STM-1 Optical Ports (SC/PC Type)
    LMXE.OX01
    Dual STM-1 Interfaces per Card (Default S1.1), SC Type. cross connection Matrix and Timing Processing are Embedded. (L1.1,L1.2, Single fiber Bi-Directional options are Available) 
     Aggregation Card  with Dual STM-1 Optical Ports (SC/PC Type)
    LMXE.OX01/L
    Dual STM-1 Interfaces per Card (L1.1), SC Type. cross connection Matrix and Timing Processing are Embedded.
     Aggregation Card  with Dual STM-1 Optical Ports (SC/PC Type)
    LMXE.OX01/LB
    Dual STM-1 Interfaces per Card (L1.2), SC Type. Cross connection Matrix and Timing Processing are Embedded.
     Aggregation Card  with Dual STM-1 Optical Ports (SFP Type)
    LMXE.OX01S
    Dual STM-1 Interfaces per Card, SFP Type. Cross connection Matrix and Timing Processing are Embedded. (SFP should be Ordered Separately). (S1.1,L1.1,L1.2, Single fiber Bi-Directional options are Available).
     Aggregation Card  with Dual STM-4 Optical Ports (SFP Type)
    LMXE.OX04
    Dual STM-4 Interfaces per Card, SFP Type. Cross connection Matrix and Timing Processing are Embedded. (SFP should be Ordered Separately) (S4.1,L4.1,L4.2, Single fiber Bi-Directional options are Available).
     Aggregation Card  with Dual STM-16 Optical Ports (SFP Type)
    LMXE.OX16
    Dual STM-16 Interfaces per Card, SFP Type. Cross connection Matrix and Timing Processing are Embedded.(SFP should be Ordered Separately) (S16.1,L16.1,L16.2, Single fiber Bi-Directional options are Available).
     Aggregation Card  with Dual STM-1 Electrical Ports
    LMXE.EX01
    Dual STM-1 Electrical Interfaces per Card, CC4 Interface Type. Cross connection Matrix and Timing Processing are Embedded.
    Dual STM-1 Tributary Card (SC Type)
    LMXE.OS01
    Dual STM-1 Interfaces per Card (Default S1.1), SC Type.(L1.1,L1.2, Single fiber Bi-Directional options are Available) 
    Dual STM-1 Tributary Card (SFP Type)
    LMXE.OS01S
    Dual STM-1 Interfaces per Card, SFP Type.(SFP should be Ordered Separately). (S1.1,L1.1,L1.2, Single fiber Bi-Directional options are Available).
    Dual STM-1&FE Tributary Card
    LMXE.OS02A
    Dual STM-1 & Dual FE Ports per Card
    Single STM-1&FE Tributary Card
    LMXE.OS03
    Single STM-1&FE Port per Card
    24E1 Tributary Card (RJ45)
    LMXE.EP01
    24E1 per Card,RJ45 Type,75ohms,BH4.850.107 or BH4.850.123 Cable Should be Equipped Separately. One card uses 2 slots.
    24E1 Tributary Card (RJ45)
    LMXE.EP01/T
    24E1 per Card,RJ45 Type,120ohms. One card uses 2 slots.
    12E1 Tributary Card (RJ45)
    LMXE.EP03
    12E1 per Card,RJ45 Type,75ohms,BH4.850.107 or BH.850.123 Cable Should be Equipped Separately
    12E1 Tributary Card (RJ45)
    LMXE.EP03/T
    12E1 per Card,RJ45 Type,120ohms
    24E1 Tributary Card (DB60)
    LMXE.EP01A/T
    24E1 per Card,DB60 Type,120ohms, Two DB60 Cable BH4.850.124-B Should be ordered Separately
    12E1 Tributary Card (DB60)
    LMXE.EP03A/T
    12E1 per Card,DB60 Type,120ohms, DB60 Cable BH4.850.124-B Should be ordered Separately
    Electrical Fast Ethernet Card (EoS)
    LMXE.FE01
    4 Electrical Fast Ethernet Ports per Card, EoS, GFP/LCAS/VCAT
    Optical Fast Ethernet Card (EoS)
    LMXE.FE02
    4 Optical Fast Ethernet Ports per Card, EoS, GFP/LCAS/VCAT, SFP Type (SFP should be ordered Separately).
    Electrical Fast Ethernet Card (EoPDH or EoE)
    LMXE.FE04
    4 Electrical Fast Ethernet Ports per Card, EoPDH or EoE (Ethernet over n*E1, One Channel: 1≤n≤16)
    Optical Fast Ethernet Card (EoPDH or EoE)
    LMXE.FE05
    4 Optical Fast Ethernet Ports per Card, EoPDH or EoE( (Ethernet over n*E1, One Channel: 1≤n≤16), SFP Type (SFP should be ordered Separately).
    Fast Ethernet Aggregation Card (EoS)
    LMXE.FE06
    Ethernet Aggregation Card (EoS), Ratio 8:2, Two External FE ports
    Fast Ethernet Aggregation Card (EoPDH or EoE)
    LMXE.FE07
    Ethernet Aggregation Card (EoPDH or EoE), Ratio 8:2,Two External FE ports
    Gigabit Ethernet Aggregation Card (EoS)
    LMXE.GX01
    Gigabit Ethernet Aggregation Card (EoS), Ratio 8:1, One Electrical Gigabit Ethernet Port
    Gigabit Ethernet Aggregation Card (EoPDH or EoE)
    LMXE.GX02
    Gigabit Ethernet Aggregation Card (EoPDH or EoE), Ratio 8:1, One Electrical Gigabit Ethernet Port
    Gigabit Ethernet Aggregation Card (EoS)
    LMXE.GX01A
    Gigabit Ethernet Aggregation Card (EoS), Ratio 8:1, One Electrical Gigabit Ethernet Port or One Optical Gigabit Ethernet Port (SFP Type)(SFP should be ordered Separately)
    Gigabit Ethernet Aggregation Card (EoPDH or EoE)
    LMXE.GX02A
    Gigabit Ethernet Aggregation Card (EoPDH or EoE), Ratio 8:1, One Electrical Gigabit Ethernet Port or One Optical Gigabit Ethernet Port (SFP Type)(SFP should be ordered Separately)
    Gigabit Ethernet Aggregation Card (EoS)
    LMXE.GX03
    Gigabit Ethernet Aggregation Card (EoS), Ratio 8:1, Two Gigabit Ethernet Ports (Electrical or Optical)(SFP Type)(SFP should be ordered Separately). Supporting VLAN, QinQ, Link Aggregation etc.
    Gigabit Ethernet Aggregation Card (EoPDH or EoE)
    LMXE.GX04
    Gigabit Ethernet Aggregation Card (EoPDH or EoE), Ratio 8:1, Two Gigabit Ethernet Ports (Electrical or Optical)(SFP Type)(SFP should be ordered Separately). Supporting VLAN, QinQ, Link Aggregation etc.
    V35 Interface Card
    LMXE.ED01
    Two V35 ports per Card. DTE/DCE. (BH4.851.103 DCE Cable should be ordered separately)
    DS0 Crossconnection Card
    LMXE.DX02
    Full 64E1 DS0 Cross connection. Matrix: 2048*2048
    E3 Interface Card
    LMXE.EP02
    One E3 per Card. CC4 Interface Type
    Orderwire&Aux Card
    LMXE.LA01
    Order wire interface and one external clock input&output interface and one RS232 Asynchronous Interface
    PDH Tributary Card
    LMXE.OP02
    4 Optical Ports per card (SFP Type). (SFP should be ordered Separately).Interworking with remote PDH CPEs H10MOS-60W(2E1)and H10MOS-60AFW(1E1+1V.35)
    PDH Tributary Card
    LMXE.OP03
    Dual Optical ports & Dual FE Ports per card. Interworking with remote PDH CPE H10MOS-60BW(2E1+FE).
    PDH Tributary Card
    LMXE.OP05
    Dual Optical ports & Dual FE Ports per card. Interworking with remote PDH CPE H10MOS-120B(4E1+FE).
    PDH Tributary Card
    LMXE.OP06
    Dual Optical ports per card. Interworking with remote PDH CPE H10MOS-120+(4E1).
    PCM Card
    LMXE+.CHU01
    10 voice channels. Channels can be set to FXS/FXO/hotline/magnet. Only for slot8 to slot13. Need ring card.
    PCM Card
    LMXE+.CHL01
    10 FXO. Should use cable BH4.851.145.
    PCM Card
    LMXE+.CHR01
    10 FXS. Should use cable BH4.851.145. Only for slot8 to slot13. Need ring card.
    PCM Card
    LMXE+.CH4W01
    10 4/W, voltage adjustable. Should use cable BH4.851.085.
    PCM Card
    LMXE+.CHM01
    4 FXO + 4 4/W + 4 RS232 interfaces. Only for slot8 to slot13. Need ring card.
    PCM Ring Card
    LMXE+.RING220V
    220V~AC ring card. Takes 2 slots.
    PCM Ring Card
    LMXE+.RING48V
    -48V DC ring card.
    Asynchronous data card
    LMXE+.SD01
    16 RS-232/V.24.
     Takes 16 voice channels. Should use cable ZJN.BH4.851.147.
    Asynchronous data card
    LMXE+.SD02
    16 RS-232/V.24 + 2 RS-422/485/V.11.
    Takes 18-voice channels. Should use cable ZJN.BH4.851.148.

    Productos relacionados