Ethernet over Coax converter Master side unit

Ethernet over Coax converter Master side unit

Short Description:

BD-EOC-M is the integrated product consisting of one EOC master module with 1RF input and 1 Com output, one GEPON ONU module with 1 PON port and 3 LAN ports outputting data to EOC master module directly.It is used as the fiber station node and the best choice for the existing coax cable networking for bi-directional service reconstruction without changing any original equipment, such as optical receiver and the coax distribution networking.


  • Payment Terms: Paypal,western union,L/C,D/A,D/P,T/T
  • Description

    Specification

    Application

    Order information

    Questions&Comments

    Product Tags

    Master module features:

    •   Physical layer bandwidth is 200Mbps and MAC layer bandwidth is 100MBPS.
    •   It can support HD video and other high bandwidth function
    •   Frequency band is 7.5~30MHz so has no influence on CATV signal
    •   Using waterproof metal casing
    •   Upgrade by network management
    •   Support auto-update and auto-configuration
    •   Support QoS, provide transmission guarantee for various type of business data
    •   Support bandwidth control. It can limit up and down stream
    •   Broadcast Strom limitation
    •   Mac Address Number limitation
    •   Support terminal isolate

    Interfaces:

    RF Port

    Physical Interface: F-type connector (metric or British type)
    Number of Interface: 2
    Interface definition: Cable, TV

    Ethernet Port
    Physical Interface: RJ45
    Number of Interface: Two
    Data Rate: 10/100Mbps self-adaptive
    Interface Standard: 10Base-T, 100Base-TX
    Transmission Distance :100 meters

    Specification:

    Slave Isolation

    Slave equipment is isolation and can’t communication with each other

    Broad width Strom Limitation

    Ethernet Port support limitation function of broadcast packet and unknown unicast packet to prevent a lot of this type of packet enter to Internet

    Bandwidth Limited

    Customer can set up bandwidth of slave uplink and downlink by managing interface. And slave uplink and downlink can be set up freely. Higher throughput IP can up to 100Mbps and the least particle size is 64Kbps

    VLAN

    The configuration is different with each VLAN. Each slave can be divided into a VLAN

     QOS

    Distinguish different data packet by VLAN ID/802.1P priority and QOS. Each data packet can be configured with different uplink and downlink bandwidth and priority

    Packet Statistics

    Offer data of uplink and downlink and observe performance condition of ports according to statistic data

    Link quality monitor

    User can see quality parameter of network link through network management. And it can be displayed by dynamic graph.

    Web Management

    We support remote centralized management based on Network management platform Data  View software and function configuration.

    Then you can see relevant configuration information such as device name, manufacturer, software version and others. You can also configure and manage Master and Slave centralized. Following is the interface of network management:

    20121128043235_5870

    20121128043338_299120160701032154_0620

     

    BD-EOC-MASTER EOC master unit, 1RF input and 1 Com output,power AC220V

     

     


    INQUIRY NOW
    • * CAPTCHA: Please select the Truck

    Question 1: How many slaves can be conncted to one master? (how many slaves can be supportted by one master?)

    Answer: One master unit can .connect to 50units slaves.

    Question 2: What is the bandwidth of the eoc device?

    Ans: Answer: Baudcom’s EOC device (master and slave) support 10/100Mbps bandwidth.
    Question 3:  How fare can be connected slave from master ?

    Answer: Baudcom’s EOC device can support 700meters distance between master and slave device.To keep margin budget,we suggest customer keep the distance as 500meters in the project.

  • Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car