Product>>E1/Ethernet converter series>>Product Info
| E1/10/100BaseT Protocol Converter | |
 |
|
| ::Detail | |
| Model name: BD-E1-ETH GENERAL INFORMATION:Model BD-E1-ETH is a single port E1 with Ethernet Bridging that provides high-speed LAN-to-WAN connectivity. Plugging directly into the 10/100Base-T port of a hub or LAN switch, the E1-ETH provides E1 access at connection data rates of 2.048 Mbps. The E1-ETH is an excellent choice for internet access as well as LAN-to-LAN services. ENVIRONMENT REQUIREMENT The temperature requirement is not very strict, the device can be working well under terrible environment. working temperature: 0C - 50C relative humidity: 95%(without coagulation) No erosive and impregnant gas, no rising dust, no strong magnetic field disturbing Power Adapting module power, voltage range can be wide, with strong ant-jamming function. With good insulation, stable working status is available power: -48V type, input voltage: -36V~-72V power: 220V type, input voltage: 165V~265V power consumption: <5W E1 Interface Line Rate: 2.048Mbps±50ppm Line Code : HDB3 Interface Standard: ITU-T G.703 E1 Impedance : 75ohm(unbalance) and 120ohm(balance) Connections : dual coax and 120ohm twisted-pair (RJ45) Jitter tolerance : finer than G.742 and G.823 10/100Base-T Interface Rate: 10/100M, full/duplex auto-negotiation Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN) MAC Address Entiries: 4096 Entiries Total Memory Sizes: 64MBits SDRAM Physical interface: RJ45, support AUTO-MDIX DIMENSIONS 210(W) × 140 (L) x 30(H) mm Ordering information: EB03/AC E1-4ETH converter, 75ohm, 120ohm, 220V EB03/DC48 E1/4ETH converter, 75ohm, 120ohm, DC-48V Application  |
|