Product>>E1/Ethernet converter series>>Product Info
| framed E1/ETH converter | |
 |
|
| ::Detail | |
| Model name: BD-FE1-ETH GENERAL INFORMATION:Model BD-FE1-ETH is a single port E1/ framed E1 with Ethernet Bridging that provides high-speed LAN-to-WAN connectivity. Plugging directly into the 10/100Base-T port of a hub or LAN switch, the FE1-ETH converter provides FE1 access at connection data rates of 2.048 Mbps, or nx64 (n=1 to 32 channels). The FE1-ETH converter is an excellent choice for internet access as well as LAN-to-LAN services. ENVIRONMENT the temperature requirement is not very strict, the device can be working well under the terrible environment working temperature: 0C- 50C relative humidity: 95%(without coagulation) No causticity and impregnant gas, no rising dust, no strong magnetic field disturbing Adapting module power, voltage range can be wide, with strong ant-jamming function . With good insulation, stable working status is available power: -48V type, input voltage: -36V~-72V power: 220V type, input voltage: 165V~265V power consume:<5W E1 Interface Line Rate: 2.048Mbps±50ppm Line Code : HDB3 Interface Standard: ITU-T G.703,G.704 E1 Impedance : 75ohm(unbalance) and 120ohm(balance) adapt Connections : dual coax and 120ohm twisted-pair (RJ45) Jitter tolerance : fine than G.742 and G.823 10/100Base-T Interface RATE : 10/100M ,full/duplex auto-negotiation PROTOCOL: Support IEEE 802.3,IEEE 802.1Q(VLAN) MAC Adderess Entiries:4096 Entiries Totol Memory Sizes:64MBits SDRAM Connection: RJ45 DIMENSIONS Mini Type:210mm(W) × 140mm (L) x 30mm(H) Order information: BD-FE1-ETH/AC220V BD-FE1-ETH/DC-48V APPLICATION:  |
|