1000M Gigabit Ethernet POE(PSE) Fiber Media Converter

Description

Overview

This advanced networking device seamlessly bridges 10/100/1000Base-TX copper networks with high-speed 1000Base-FX fiber optic connections, while simultaneously delivering robust Power over Ethernet (PoE) capabilities as a Power Sourcing Equipment (PSE). As a versatile Gigabit media converter, it solves distance and interference limitations of traditional copper cabling, allowing reliable data transmission up to an impressive 100 kilometers with single-mode fiber.

What sets this converter apart is its intelligent dual-function design. It not only converts electrical signals to optical signals but also provides IEEE802.3at/af compliant PoE power to remote devices like IP cameras, wireless access points, and VoIP phones over standard CAT5e/CAT6 cables. With built-in Link Fault Pass-through (LFP) technology, the device automatically monitors both fiber and copper connections, ensuring network reliability by disabling transmission on one port if it detects signal loss on the other. This industrial-grade media converter features a compact, rugged design suitable for challenging environments with operating temperatures from 0°C to 55°C and includes comprehensive protection features like auto-recovery short circuit and over-current protection.

PoE media converter fiber Features & Specifications

Core Conversion Technology

• Dual-Mode Conversion: Converts 10/100/1000Base-TX Ethernet to 1000Base-FX fiber optic (with forced 100Base-FX capability)
• High-Speed Performance: Supports 10Mbps, 100Mbps, and 1000Mbps data rates with 9K bytes packet handling at cut-through mode
• Fiber Flexibility: Compatible with both single-mode (up to 100km range) and multi-mode (up to 5km range) fiber optics
• Connector Options: Available with SC, FC, ST, LC, or BiDi connectors based on configuration requirements

Power over Ethernet (PSE) Capabilities

• Standards Compliance: Fully compliant with IEEE802.3af and IEEE802.3at PoE standards
• Power Delivery: Provides 48V power (or other voltages) to connected Powered Devices (PDs) via CAT5e/CAT6 UTP cable
• Intelligent Management: Built-in PSE controller with PD signature sensing and continuous power monitoring
• Pin Configuration: Delivers power on pins 4/5 (V+) and 7/8 (V-) following PoE standards

Network Reliability & Protection

• Link Fault Pass-through (LFP): Automatically monitors fiber and copper RX ports for signal loss and disables corresponding TX ports to maintain network integrity
• Comprehensive Protection: Features over-current protection with auto-recovery and short circuit protection with auto-recovery
• Stable Performance: Maintains signal integrity with minimal loss even over extended distances

1000Base-FX Optical poe media converter fiber interface:

Connector: SC,FC or ST are optional

Wavelength: 1310nm,1550nm or 850nm(can be chosen by customer)

Optical fiber category:

Ø       single-mode 8.3/125, 8.7/125, 9/125, 10/125um

Ø       multi-mode 50/125, 62.5/125, 100/140um

multi- mode connection: transmitting range can reach 5 kilometers as farthest;

single-mode connection: transmitting range can reach 100 kilometers.

10/100/1000M Base-TX： 

Connector: UTP RJ45 connector

Data Rates:

10/100/1000Mbps

(IEEE802.3U IEEE802.3z 1000Base-Tx)

1000Mbps (1000Base-FX) or

100Mbps (100Base-FX)

Power over Ethernet Output:

Pin Assignment and Polarity:4/5 (V+),7/8 (V-)
Output Power: please refer to ordering information
Efficiency: 75% min
Short circuit protection: auto recovery
Over current protection: auto recovery

PoE media converter Optical Specification :

Dimension                  

2      95mm(L)x70mm(W)x26mm(H)

 Environment condition                  

Operating temperature:  0C~+55 C

Storage temperature:   -20 C~+70 C

Relative temperature: 95%

PoE media converter fiber Ordering Information: