128 Ports Analog Gateway Voip FXS
Short Description:
The gateway voip fxs are modular designed, which can easily expand FXS ports by adding FXS boards according to user’s requirements. Each board has 8 FXS ports and the voip gateway supports 128 FXS ports at maximum. The 128 FXS analog voip gateway supports the standard SIP protocol.Description
Specification
Application
Order information
Q&A
Product Tags
Reviews
Description
Overview
BD-VOIP-128S is a multi-functional analog FXS gateway which supports seamless connectivity between IP-based telephony networks and legacy telephones (POTS), fax machines and PBX systems. The gateway voip fxs are modular designed, which can easily expand FXS ports by adding FXS boards according to user’s requirements. Each board has 8 FXS ports and the voip gateway supports 128 FXS ports at maximum.
The 128 FXS analog voip gateway supports the standard SIP protocol and it’s compatible with leading IMS/NGN platforms and SIP-based IP telephony systems. It is ideally suited for small and medium businesses, call centers and multi-location environments that need VoIP services.
The gateway voip FXS can be managed by WEB browse, telnet, SNMP and console management, easily configure and mornitor.
Key Features
- High density gateway, up to 128 FXS
- Modularized design, easy to expand
- Support IPv4 and IPv6
- 5KM Maximum Cabling Length
- Multiple codecs: G.711A/U,G.723.1,G.729A/B, iLBC
- Fully compatible with leading IMS/NGN, SIP based IP telephony system
Specification
Physical Interfaces
Capacity Range from 8 to 128 FXS Support 16 user board slots User Board 2* RJ45 connectors with 8 FXS MCU Board 1*RS232, 115200bps 2*10/100/1000Mbps, RJ45 1* USB 2.0 |
FXS
Connector: RJ45 with 4 FXS Dial Mode: DTMF and Pulse Pulse: 10 and 20 PPS Caller ID: DTMF/FSK CLI Presentation Max Cable Length: 5KM Reversed Polarity Programmable Call Progress Tone |
VoIP
Protocol: SIP v2.0 (UDP/TCP),RFC3261 SDP,RTP(RFC2833), RFC3262, 3263,3264,3265,3515,2976,3311 SIP TLS RTP/RTCP, RFC2198, 1889 RFC4028 Session Timer RFC3266 IPv6 in SDP RFC2806 TEL URI RFC3581 NAT,rport Outbound Proxy DNS SRV/ A Query/NATPR Query SIP Trunk Early Media/Early Answer NAT:STUN, Static/Dynamic NAT |
Voice & FAX
G.711A/U law, G.723.1, G.729A/B, G.726,iLBC Silence Suppression Comfort Noise Generation(CNG) Voice Activity Detection(VAD) Echo Cancellation(G.168), with up to 128ms Adaptive (Dynamic) Jitter Buffer Hook Flash Programmable Gain Control T.38/Pass-through Modem/POS DTMF mode: Signal/RFC2833/INBAND VLAN 802.1P/802.1Q Layer3 QoS and DiffServ |
Software Features
Hunting Group Web ACL Telnet ACL Action URL PPPoE/IPv4/IPv6 Digitmap Bandwidth Optimization Routing Rules based Prefixes Caller/Called Number Manipulation |
Environmental
1+1 Power Supply: 100-240VAC, 50-60 Hz Power Consumption:105W MAX Operating Temperature:0 ℃ ~ 45 ℃ Storage Temperature: -20 ℃ ~80 ℃ Humidity:10%-90% Non-Condensing Dimensions(W/D/H): 440*300*135mm(3U) Unit Weight: 9.3kg Compliance: CE, FCC |
Supplement Service
Call Waiting Blind Transfer Attend Transfer Call Forward on Busy Call Forward on No Reply Unconditional Call Forward Warm/Immediately Hotline Call Hold Do-not-disturb 3-Way Conference Message Waiting Indicator |
Maintenance
SNMP TR069 Auto Provisioning Web/Telnet Configuration Backup/Restore Firmware Upgrade via Web CDR Syslog Ping/Tracert Test Network Capture Outward Test(GR909) NTP/Daylight Saving Time IVR local Maintenance Cloud-based Management |
Application
A
B
Order information
Q&A
Product Tags
Reviews
2 responses
We bought the 128 FXS VOIP gateway, it worked fine. I can’t get into gateway after changed the password , how to reset?
Thanks your feedback, you reset the fxs gateway by below steps:
1. powerON the device 2.pess the RST button 10s 3. reboot the device
after voip gateway power up, all setting back to default status