4U 17Slots Rack Mount Chassis for E1 Converter and Fiber Multiplexer
Short Description:The rack mount chassis is 4U high and 17solts which can be inserted 17 pcs service cards, or one network management card and 16 service cards, each card works independently. The rack chassis can support E1 fiber modem, e1 converter, 4E1 fiber multiplexer, 4E1 ethenet converter etc cards. double power supply, central SNMP management.
The rack mount chassis is 4U high and 17solts which can be inserted 17 pcs service cards, or one network management card and 16 service cards, each card works independently. The rack chassis can support E1 fiber modem, e1 converter, 4E1 fiber multiplexer, 4E1 ethenet converter etc cards. Different protocol interface conversion cards can be inserted in and work simultaneously on the same rack. The integrated chassis will save much space and easy management.
The 19inch chassis support two power supply (1+1 redundant protection), which make the chassis more stable working for longtime. The rack chssis also uses communication isolation technology to separate system power from interface conversion card completely to ensure the reliability of the entire system.
Centralized SNMP rack mount solution allows network operator efficiently use expensive collocation place in racks, monitor network and deploy efficient fiber point-to-multipoint systems for access networks.
- Can insert various types of interface converter produced by our company
- 19-Inch 4U standard rack, using the principle of air, good rack radiating performance, ease of management and maintenance
- Can insert up to 12hot-plug cards, each interface conversion card can achieve conversion function independently
- Two power panel slots support mutual hot spare between two power units. Each power unit can support the entire rack work full of configuration. Two power units work together through shunt on the one hand to reduce each power unit load, on the other hand by mutual hot spare to ensure if one power unit having problem within the time rack inner function panel can work
- Support SNMP Network Management
- Fully meet Telecom operation requirements, Mean time Between Failures (MTBF) is more than 50,000 hours.
- Maximum number of power modules: 2 power modules
- Maximum power parameters of the function card: DC5V/1.5A (7.5W)
- Power consumption: 100W
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
|Functional Description||4U Rackmount ， Can insert various types of interface converter ，Video fiber Transceiver ，Fiber modem ，PDH ，PCM|
|Power||Power supply: AC180V ~ 260V；DC –48V；DC +24V|
|Dimension||Product Size: 443X365X195mm (WXDXH)|