BD-IF400D Optical Fiber Identifier
Short Description:BD-IF400D Optical Fiber Identifier is an important tool for optical maintenance, which is used for n…
BD-IF400D Optical Fiber Identifier is an important tool for optical maintenance, which is used for nondestructive fiber identification project. Meanwhile it also has Visual Fault Locator module with fault location function.
Useing the macro bending technology on line for nondestructive testing, BD-IF400D Optical Fiber Identifier can measure the signal direction and power and avoid misoperation resulting in interrupted lines.
—Macro bending measurement. Macro bends are the use of fiber-optic bending leak out when the weak optical signal, optical signal to detect the direction and intensity. Does not damage optical fiber, without interrupting communications, and direct detection of 25mm bare fiber, 0.9mm and 2.5mm fiber casing tight jumper.
—Tone identification, BD-IF400D Optical Fiber Identifier can detect optical signals in the tone signal a fixed load, 270Hz, 1KHz and 2KHz, to identify a specific optical fiber, can quickly find the necessary fiber.
—Build in VFL function.The output power of BD-IF400D Optical Fiber Identifier is 10 mW.
—Low battery monitoring function, when battery power is insufficient to issue instructions to remind users to change batteries.
|Pass through insertion loss： |
1. 250umOptical fiber
2. 900umOptical fiber
3. 3mmOptical fiber
|Application of optical fiber||250um/900um/2.5um/3mm Optical fiber|
|Identified Signal Type||270HZ/1KHZ/2KHZ|
|Identification of modulated signals||Yes|
|Low power monitoring||Yes|
|Detector type||1mm InGaAs|
|Minimum detection power |
|Specifications of VFL|
|Output Power：||10 mW|
|Power supply：||2*AA 1.5V Alkaline Battery|
|Operation Temperature：||-10℃ to +50℃|
|Storage Temperature：||-20℃ to +70℃|