8E1 TDM sur IP | 8 E1 sur IP Mux

8E1 TDM over IP | 8 E1 over IP Mux

Brève description:

BD-8E1-IP is the new generation of the TDM over IP equipment with IP circuit emulation that supports transportation of eight E1 and two local Ethernet ports over Ethernet or IP network. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100BaseT auto-sensed Ethernet port.
  • Modalités de paiement:Paypal, union occidentale, L/C, D/A, D/P, T/T

  • La description

    spécification

    Application

    Ordre

    FAQ

    Étiquettes de produit

    Commentaires

    La description

    Aperçu:

    As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, BD-8E1-IP adopts the innovative TDM over IP technology, it transports the legacy E1 data through the existing Ethernet or IP network.
    BD-8E1-IP is the new generation of the TDM over IP equipment with IP circuit emulation that supports transportation of eight E1 and two local Ethernet ports over Ethernet or IP network. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100BaseT auto-sensed Ethernet port.
    The state-of-the-art design provides the highest availability with the accurate timing signal and data bit stream reconstruction. Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost.
    Telecom and Enterprise users can save a lot of access and equipment costs and generates new revenue by offering different types of service over existing Ethernet networks. It is also suitable for connecting to the wireless equipment to achieve fast deployment of E1 services. One particular application is to build E1 links with low cost Wireless LAN bridges, replacing much more costly microwave radios. Operators can use BD-8E1-IP to provide legacy TDM services over wired or wireless packet network.
    Caractéristiques
    1.       User-friendly Web server supported for easy setup and maintenance
    2.       Support IETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP
    3.       Point to point and point to multipoint application
    4.       Eight E1 Ports supported
    5.       Provide 4 FE electrical ports and 1 FE optical port, 2 uplink ports, 2 local data ports or monitoring ports, optical port can be used for uplink or local data.
    6.       Stable E1 clock recovery, low jitter and wander
    7.       Low processing delay for E1 channels, high bandwidth usage efficiency
    8.       Resist to packet loss, with PCM frame synchronization protection
    9.       User definable encapsulation packet size for different application
    10.    Support VLAN settings for E1 service and in band VLAN management.
    11.    E1 clock supports 3 mode: local clock, adaptive and loopback
    12.    Enough jitter buffer to resist packet delay variation (PDV)
    13.    Local Ethernet port throughput limiting, assuring E1 QoS
    14.    Local and remote E1 LOS and AIS and packet loss indication for trouble-shooting and maintenance
    15.    Ethernet built-in layer 2 switch, support VLAN(port based, 802.1Q based and QinQ based), QoS(port based、8021.1P based、MAC based and TOS based).

    16.     Ethernet support IEEE 802.3x, RSTP (802.1w), LLDP, Ethernet ring protection, OAM and MAC address automatic learning

    17.        Ethernet packet size up to 9720byte

    18.        Support POE (maximum power: 60W) (optional);

    spécification
    Article
    La description
    Modèle
    BD-8E1-IP
    2 Uplink (1+1), 8E1s, 2 User Data Ports
    Interfaces
    Liaison montante
    2 Uplink Ports
    Conforme à IEEE 802.3
    Speed and duplex auto-negotiation or forced
    Port E1
    8 E1 Ports Supported
    Conforme à G.703
    Impedance: E1-120Ω or 75Ω
    Port de données utilisateur
    2 ports de données utilisateur pris en charge
    Conforme à IEEE 802.3
    Speed and duplex auto-negotiation or forced
    Gestionnaire Web pris en charge
    Puissance
    Fournir
    Pluggable dual power supply
    2DC or 2AC or DC+AC
    -48V DC or 100~240V AC
    Consommation
    10W
    Environnement de travail
    Température
    0~ 50°C
    Humidité relative
    ≤90% (sans condensation)
    Dimension
    L x H x P (mm) :
    440 x 44 x 231
    Application

    Point to Point Application

    Point to Multipoint Application
    E1/4E1/8E1 TDM over IP work with 16E1 TDM sur IP .

    Ordre
    modèle du produit Descriptifs Demande
    BD-8E1-IP/AC 8E1 over ethernet multiplexer(TDM over IP),8E1 ports (75ohm/120ohm option),2*10/100Base-T data interfaces for downlink,2*10/100Base-T interfaces for uplink (1+1),power AC220V Demande de prix
    BD-8E1-IP/DC 8E1 over ethernet multiplexer(TDM over IP),8E1 ports (75ohm/120ohm option),2*10/100Base-T data interfaces for downlink,2*10/100Base-T interfaces for uplink (1+1),power DC 48V Demande de prix
    BD-8E1-IP/AC+DC 8E1 to Ethernet converter/multiplexer (TDM over IP),8E1 ports (75ohm/120ohm option),2*10/100Base-T data interfaces for downlink,2*10/100Base-T interfaces for uplink (1+1),AC220V+DC48V Demande de prix
    FAQ
    Étiquettes de produit
    Commentaires

    0 avis

    5

    5 départ 5 0
    4 départ 4 0
    3 départ 3 0
    2 départ 2 0
    1 départ 1 0

    Captcha

    Le fichier maximum autorisé est de 50 Mo Mo. Vous pouvez télécharger des images et des vidéos. Déposez les fichiers ici

    Leave Your Message