Convertisseur E1 sur Ethernet TDM sur IP

E1 over ethernet TDM over IP converter

Brève description:

BD-E1-IP is new generation TDM over IP equipment that transportate E1/T1 over Ethernet or IP network.Web-based management.support optical ethernet(SFP slot)
  • Modalités de paiement:Paypal, union occidentale, L/C, D/A, D/P, T/T

  • La description

    spécification

    Application

    Ordre

    FAQ

    Étiquettes de produit

    Commentaires

    La description

    Aperçu:

         As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, BD-E1-IP adopts the innovative TDM over IP technology, it transports the legacy E1/T1 data through the existing Ethernet or IP network
        BD-E1-IP is the new generation of the TDM over IP equipment with IP circuit emulation that supports transportation of  E1/T1 over Ethernet or IP network. The uplink ports is  IEEE 802.3 compliant, 10/100BaseT auto-sensed Ethernet port.
       The Ethernet over E1 converter is a mini type device,which only half occupation of 19″ device.It is very convenient for customer to use it.
    The state-of-the-art design provides the highest availability with the accurate timing signal and data bit stream reconstruction. Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost.
    Telecom and Enterprise users can save a lot of access and equipment costs and generates new revenue by offering different types of service over existing Ethernet networks. It is also suitable for connecting to the wireless equipment to achieve fast deployment of E1/T1 services. One particular application is to build E1/T1 links with low cost Wireless LAN bridges, replacing much more costly microwave radios. Operators can use BD-E1-IP to provide legacy TDM services over wired or wireless packet network.
    Caractéristiques
    1.    Support IETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP.
    2.     Support POE power unit embedded, support maximum 60W power over Ethernet.(optional)
    3.     User-friendly Web server supported for easy setup and maintenance
    4.     Point to point application and point to multipoint application are supported
    5.     E1/T1 Port supported, E1 or T1 easy selected by Web Manager
    6.     Uplink ports 1+1 backup supported
    7.     Stable E1/T1 clock recovery, low jitter and wander
    8.     Low processing delay for E1/T1 channels, high bandwidth usage efficiency
    9.     Resist to packet loss, with PCM frame synchronization protection
    10.     User definable encapsulation packet size for different application
    11.     Enough jitter buffer to resist packet delay variation (PDV)
    12.    Local Ethernet port throughput limiting, assuring E1/T1 QoS
    13.    Local and remote E1/T1 LOS and AIS and packet loss indication for trouble-shooting and maintenance
    14.    Support cascade concatenate for more than E1/T1 port
    15.    Support double power or single power supplier.
    spécification
    Article
    La description
    Modèle
    BD-E1-IP
    2 Uplink (1+1), E1/T1
    Interfaces
    Liaison montante
    Conforme à IEEE 802.3
    Port E1/T1
    E1 or T1 Ports Supported
    Conforme à G.703
    Impédance : E1-120Ω/T1-100Ω ou 75Ω
    Puissance
    Fournir
    -48V DC ou 220V (110V) AC ou double alimentation
    +24VDC
    Consommation
    10W
    Environnement de travail
    Température
    0~ 50°C
    Humidité relative
    ≤90% (sans condensation)
    Dimension
    L x H x P (mm) :
    220 x 35 x 150
    Application

    Application1: Point to Point Application two units E1 TDM over IP work with voice device (PBX,PCM) and ethernet device (switch or router),transmitting voice and ethernet data over ethernet network.

    Application2: Point to Point Application

    E1 TDM over IP work with Voice over E1 converter,transmitting voice and ethernet data over ethernet network.

    Application3: Point to multipoint Application
    16units E1 TDM over IP work with 16E1 TDM sur IP or E1/4E1/8E1 TDM over IP work with 16E1 TDM over IP.
    Ordre
    modèle du produit Descriptifs Demande
    BD-E1-IP/AC E1 TDM over IP,E1 support 75ohm or 120ohm,10/100Mbps ethernet,web base management,power AC220V Demande de prix
    BD-E1-IP/DC E1 TDM over IP,E1 support 75ohm or 120ohm,10/100Mbps ethernet,web base management,power DC48V Demande de prix
    FAQ

    What is the difference between TDM over IP and E1 to Ethernet converter ?

    Étiquettes de produit
    Commentaires

    0 avis

    5

    5 départ 5 0
    4 départ 4 0
    3 départ 3 0
    2 départ 2 0
    1 départ 1 0

    Captcha

    Le fichier maximum autorisé est de 50 Mo Mo. Vous pouvez télécharger des images et des vidéos. Déposez les fichiers ici

    Leave Your Message