Fibre-1Voice+4E1+4FE+4RS232 Multiplexeur

Brève description:

This device provides 1Channel telephone, 1-4*Channel E1 interface, 4*Channel 10M/100M Ethernet interface (Wire Speed 100M) and 4 expansion interface.
  • Modalités de paiement:Paypal, union occidentale, L/C, D/A, D/P, T/T
  • La description

    spécification

    Application

    Ordre

    FAQ

    Étiquettes de produit

    Commentaires

    La description

     Overview

    This device provides 1Channel telephone, 1-4*Channel E1 interface, 4*Channel 10M/100M Ethernet interface (Wire Speed 100M) and 4 expansion interface. 4*Channel Ethernet interface is switch interface, can support VLAN. 4 expansion interface can be used as the transmission channel of RS232/RS485/RS422 asynchronous data, voice signal, 2/4 line E&M audio signal, switch signal, Ethernet signal (Bandwidth 2M). It is very flexible.

     Product Photo

    1

     Overview

    This device provides 1Channel telephone, 1-4*Channel E1 interface, 4*Channel 10M/100M Ethernet interface (Wire Speed 100M) and 4 expansion interface. 4*Channel Ethernet interface is switch interface, can support VLAN. 4 expansion interface can be used as the transmission channel of RS232/RS485/RS422 asynchronous data, voice signal, 2/4 line E&M audio signal, switch signal, Ethernet signal (Bandwidth 2M). It is very flexible.

    Caractéristiques

    • Based on self -copyright IC
    • E1 interface comply with G.703, adopts digital clock recovery and smooth phase-lock technology;
    • Support FXO/FXS, EM2/4 audio, Magnet telephone Interface, FXO port docking with program-controlled switchboard, FXS port connected to the user’s telephone;
    • 1channel Voice access, supports caller ID feature and reverse polarity billing functions
    • Support various sites mutual number allocation function
    • Provide 4 expansion interface, you can extend 1~4*Channel asynchronous data, such as RS232/RS485/RS422/Manchester code;
    • 1~4*Channel voice, 1~8Channel switch or two/four line audio and so on
    • Ethernet interface supports10M/100M, half/full duplex auto- adaptable, support VLAN
    • 4*Channel Ethernet interface is switch interface, support VLAN, can set to 4* channel logical isolation
    • Ethernet interface can support AUTO-MDIX (crossed line and straightly connected line self-adaptable)
    • Telephone interface with lightning protection, lightning reached IEC61000-4-5 Short circuit current wave 8 / 20μs, the peak output voltage 6KV open standards.
    • The transmission distance is up to 2-120Km without interruption
    • AC 220V, DC-48V, DC24V can be optional

     

     

     

    spécification

    Fibre

    Fibre multimode

    50/125um, 62,5/125um,

    Maximum transmission distance:       5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)Wave Length:   820nm

    Transmitting power:                      -12dBm (Min) ~-9dBm (Max)

    Receiver sensitivity:                       -28dBm (Min)

    Link budget:                               16dBm

    Fibre monomode

    8/125um, 9/125um

    Maximum transmission distance:       40Km

    Transmission distance:                    40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

    Wave Length:                              1310nm

    Transmitting power:                      -9dBm (Min) ~-8dBm (Max)

    Receiver sensitivity:                       -27dBm (Min)

    Link budget:                               18dBm

    Interface E1

      Interface Standard:        comply with protocol G.703;
     Interface Rate:                  n*64Kbps±50ppm;
     Interface Code:             HDB3;

     E1 Impedance:              75Ω (unbalance), 120Ω (balance);

     Jitter tolerance:            In accord with protocol G.742 and G.823

     Allowed Attenuation:     0~6dBm

    Ethernet interface(10/100M)

    Interface rate:                10/100 Mbps, half/full duplex auto-negotiation

    Interface Standard:              Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

    MAC Address Capability:  4096

    Connector:                   RJ45, support Auto-MDIX

    FXS Phone Interface

     Ring voltage:                     75V

     Ring frequency:                 25HZ

     Two-line Impedance:          600 Ohm (pick up)

     Return loss:                      40 dB

    FXO Switch Interface

    Ring detect voltage:            35V

    Ring detection frequency:     17HZ-60HZ

    Two-line Impedance:            600 Ohm (pick up)

    Return loss:                       40 dB

    EM 2/4 Line

    AD:                                 0dB

    DA:                                    -3.5dB

    Two/Four-line Impedance:     600 Ohm

    Return loss:                       20 dB

    u  Environnement de travail

    Working temperature:         -10°C ~ 50°C

    Working Humidity:                  5%~95 % (no condensation)

    Storage temperature:           -40°C ~ 80°C

    Storage Humidity:               5%~95 % (no condensation)

    Caractéristiques

    Modèle BD-OP-MUX01-R
    mode d'emploi 1 *Voice,4E1,4*100 Mbps Ethernet,Console or SNMP,4*RS232/422/485 ,Support 6U rackmount,1+1 fiber back up
    Puissance Power supply: AC180V ~ 260V;DC –48V;DC +24VPower consumption: ≤10W
    Dimension Product Size:19inch  485X138X45mm(WXDXH)
    Poids 19inch  2.4KG
    Application

    1

    Ordre
    modèle du produit Descriptifs Demande
    BD-OP-MUX01-R voice signal, 2/4 line E&M audio signal, switch signal, Ethernet signal (Bandwidth 2M). Demande de prix
    FAQ
    Étiquettes de produit
    Commentaires

    0 avis

    5

    5 départ 5 0
    4 départ 4 0
    3 départ 3 0
    2 départ 2 0
    1 départ 1 0

    Captcha
    Leave Your Message