Modules fibre optique SFP

BD-QSFP28-CD40 100G optical transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed,and passed on to four laser drivers, which control four lasers (Lan-WDM) with 1296, 1300, 1305, and 1309 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector.On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a APD photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features…

BD-QSFP28-CD10 is the optical transceiver that integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed,and passed on to four laser drivers, which control four electric-absorption modulated lasers (EMLs) with 1296, 1300, 1305, and 1309 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector.On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This…

BD-QSFP28-CDS1 optical transceiver integrates the transmit and receive path onto one module. It converts parallel electrical input signals into parallel optical signals, by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The transmitter module accepts electrical input signals compatible with Common Mode Logic (CML) levels. All input data signals are differential and internally terminated. The receiver module converts parallel optical input signals via a photo detector array into parallel electrical output signals. The reCML) levels. All data signals are differential and support a data rates up to 27.9525Gb/s per channel.ceiver module outputs electrical signals are also voltage compatible with Common…

BD-QSFP28-CD80 is designed for 80km optical communication applications. This module contains 4- lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter- face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure. QSFP28 MSA compliant Hot pluggable 38 pin electrical interface 4 LAN-WDM lanes MUX/DEMUX design 4x25G electrical interfac Maximum power consumption 5W LC duplex connector Supports 103.125Gb/s aggregate bit rate Up to 80km transmission on single mode fiber Operating case temperature: 0℃ to 70℃ Single 3.3V power supply RoHS 2.0 compliant

BD-QSFP -CD40 40G is a transceiver module designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in…

BD-QSFP-CD10 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for InfiniBand QDR/DDR/SDR, 10G/8G/4G/2G fiber channel . and SAS Applications. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10.3Gbps operation for an aggregate data rate of 40Gbps 10km using single mode fiber. These modules are designed to operate over single mode fiber systems using 1310nm DFB laser array. An optical fiber ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP+ PSM LR4 is one kind of parallel transceiver which provides increased port density and total system cost savings. Product…

BDTRP695S1SD-40 RoHS Compliant 2.5G 1490/1550nm(1550/1490nm) 40km Transceiver.

SFP WDM Optical Transceiver,1000Base-LX/LH Distance 10km 20Km 40Km with 9/125 SMF Data rate up to 1.25Gb/s Meet SFP MSA

BDTR-FB-P1RC Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 100base-T copper SFP module standards as specified in IEEE Std 802.3 .  

Émetteur-récepteur de module optique SFP 155M avec DDM, double fibre, duplex LC.

Émetteur-récepteur optique SFP 1,25 G avec morniteur DDM, dulpex LC, jusqu'à 80 km.

L'émetteur-récepteur Baudcom DWDM SFP présente une excellente stabilité de longueur d'onde, prenant en charge le fonctionnement sur un canal de 100 GHz, un module rentable. Il est conçu pour les applications DWDM SONET/SDH, Gigabit Ethernet et Fibre-Channel.

Émetteur-récepteur optique ESFP 155 M ~ 2,67 Gbps, LC duplex, jusqu'à 80 km, compatible avec RoHS.

Émetteur-récepteur SFP vidéo HD-SDI 3 Gbit/s, LC duplex, jusqu'à 80 km, compatible SMPTE 297-2006.

1.25G, 1000Base-LX/LH, fibre unique, jusqu'à 120 km, compatible avec les modules HUAWEI/Cisco/3COM.

Émetteur-récepteur SFP vidéo HD-SDI 1,485 Gbit/s, LC duplex, jusqu'à 80 km, compatible SMPTE 297-2006.

L'émetteur-récepteur SFP 1000Base-T est un module SFP en cuivre qui possède 1 port fibre et 1 port cuivre (RJ45), compatible HUAWEI/CISCO.

1,25 G, connecteur LC duplex, 1000Base-SX, longueur d'onde : 850 nm ou 1310 nm, fibre multimode, distance de transmission jusqu'à 550 m (1804 pieds), compatible avec les commutateurs et routeurs Cisco/3COM/Huawei/ZTE/HP.

155M SFP Optical Transceiver, dual fiber, SM or MM, duplex LC, up to 80KM.