RS232/V35/Ethernet to E1 Converters

  • 24E1 Gigabit Ethernet Aggregator

    BD-24E1-GE-CON is a Gigabit Ethernet aggregator with inverse multiplexing and VLAN TAG function; it provides three gigabit Ethernet interfaces (2 electrical and 1 optical Ethernet interfaces) compliant with IEEE 802.3 series standard and up to 24 E1 interfaces. Overview   BD-24E1-GE-CON is a Gigabit Ethernet aggregator with inverse multiplexing and VLAN TAG function; it provides three gigabit Ethernet interfaces (2 electrical and 1 optical Ethernet interfaces) compliant with IEEE 802.3 series standard and up to 24 E1 interfaces. It can separate the Ethernet data from GE port (the carried VLAN Tag correspond to different VCG channels), encapsulate them into EoPDH signal,…
    detail >>
  • E1 to 4*10/100BaseT Ethernet converter with Local management

    E1 to 4*100BASE-TX ethernet Protocol converter,Ethernet bridge, which accomplishes the 4*100M Ethernet over E1 transmission.The four ethernet ports can be used as shared mode or isolasion mode,can configure TAG VLAN.
    detail >>
  • G703 E1 to Ethernet converter | Ethernet over E1

    BD-E1-ETH is single port G703 E1 to Ethernet converter which realize ethernet over E1 tdm conversion. The G703 converter support E1 BNC(75ohm) and RJ45(120ohm),10/100M Base-T ethernet.
    detail >>
  • Framed E1 to 4 10/100BaseT Ethernet converter with enhanced management

    E1 to ethernet converter with enhanced management,support web management and SNMP management, The E1/Ethernet converter can work with STM1/GE converter as point to multipoint application.
    detail >>
  • 16E1 to Optical Ethernet converter |optical ethernet over 16E1

    16E1 to Optical Ethernet converter,16E1 ports,4*Ethernet ports: 1*Optical Ethernet port+3Electrical ethernet, Support SNMP management.
    detail >>
  • E1 G.703 to 16 channel RS232 converter

    E1 G.703 to 16 chanel RS232 converter realizes data conversion between ITU-T G.703 standard E1 and 16 channle RS232 interface.Date interface mode is DCE, could connect to DTE or DCE device, RS232could transmit asynchronous 0~115200Kbps self-adapt.
    detail >>
  • DS3/E3 to Ethernet converter

    DS3/E3 to ethernet converter realize 4*10/100M ethernet over E3/DS3 conversion.Support network management.
    detail >>
  • E1 G.703 to V.35 and 10/100BaseT Ethernet converter

    E1 G.703 to V.35 and 10/100BaseT Ethernet can realize V.35 and 10/100BaseT Ethernet transmit over E1 G.703 network.The interface mode of V35 data is DCE, which can be connected with DTE of DCE equipment; Ethernet interface 10/100M, half/full duplex self-adaptable, and supports VLAN protocol;
    detail >>
  • E1 G.703 to 31 channel RS232 converter

    E1 G.703 to 31 chanel RS232 converter realizes data conversion between G.703 E1 and 31 channle RS232interface. Date interface mode is DCE, could connect to DTE or DCE device.
    detail >>
  • 2 Ethernet over 2E1 Convergency converter

    BD-2E1-2ETH-CON is multiservice node ring network system equipment is the highly integrated access devices with the bandwidth share function. The 2E1 device can realize two RS-232/485 and 2 Ethernet over 2 channel E1 aggregation transmission.
    detail >>
  • Framed E1 G.704 to RS232 converter

    BD-FE1-RS232/AC Framed E1 G.704 to RS232 converter,attach DB25 to DB9 cable,AC220V BD-FE1-RS232/DC Framed E1 G.704 to RS232 converter,attach DB25 to DB9 cable,DC48V
    detail >>
  • 16E1 to Gigabit Ethernet Converter with optical SFP slot

    16E1 to Gigabit Ethernet Converter,3*10/100/1000M ethernet and 2 optical GE ethernet ports(SFP slot),Console management
    detail >>
  • E1 to Ethernet and RS232 converter

    BD-E1-ETH-RS232/M E1 to Ethernet and RS232 converter | Ethernet and RS232 over E1, MINI type,AC or DC for option BD-E1-ETH-RS232 E1 to Ethernet and RS232 converter | Ethernet and RS232 over E1, 19inch rackmount type,AC or DC for option
    detail >>
  • 4 E1 TDM over IP | 4E1 over Ethernet Multiplexer

    The 4E1 over ethernet multiplexer can support E1 or T1. The uplink have two 10/100M ethernet port. The 4E1 over IP device can managed by WEB management,easily used by customer.
    detail >>
  • E1 G.703 to 8 channel RS232 converter

    E1 G.703 to 8 chanel RS232 converter realizes data conversion between G.703 E1 and 8channle RS232 interface.The E1 RS232 converter could connect to DTE or DCE device,RS232 could transmit asynchronous 0~115200Kbps self-adapt.
    detail >>
  • 16E1 to Ethernet Converter

    The 16E1/Ethernet converter provide 16E1 ports,4 ethernet ports.double power support AC220V+DC48V.Providing super terminal or SNMP management. Baudcom’s 16E1 to Ethernet LAN converter realize Ethernet transparent transmission over 1~16E1 with maximum transmit rate of 31.68Mb/s.  
    detail >>
  • E1 to V.35 Protocol Converter

    BD-E1-V.35 is E1 to V.35 protocol converter which provides physical level conversion between G.703 standard E1 interface and standard V.35 interface.
    detail >>
  • 4U Rack Mount Chassis

    The 4U Rack mount chassis support kinds of E1 interface converter and PDH fiber optical multiplexer,the rack chassis support SNMP management,double power.
    detail >>
  • 8E1 to 4Ethernet Converter with SNMP and console managment

    BD-8E1-4ETH is a ethernet over E1 converter which realize 8E1 to Ethernet LAN converter,supporting 4port ethernet.support SNMP network management and super terminal management
    detail >>
  • TimeSlot drop and insert system

    Time Slot Extraction and Insertion system consists of node equipment and central convergence server, and node equipment can extract partial time-slots from E1 channel to implement multiplexing transmission of 1/2/4/8 channel(s) of RS232/RS422/RS485 serial port data or Ethernet data, and the node equipment can construct chain network by cascade connection, and the central server can collect serial port data or Ethernet data of E1 time-slots, and upload it via IP mode.
    detail >>
1 2 Next > Page 1 / 2
Leave Your Message