Optical Fiber Cable

optical fiber cable

  • FTTH Drop Wire Cable Hanger Feeder Clamp

    Drop Cable Hanger Clamp is composed of stainless steel and will last a long time. It can be installed on walls, poles with drive hooks, pole brackets, FTTH brackets, and other drop wire fitting or hardware are possible with the stainless steel tail wire/bail.
    detail >>
  • Mid Span ADSS Fiber Optical Cable Overhead Preformed Suspension Clamp

    Preformed suspension clamp for mid span ADSS fiber optical cable, overhead transmission line to pole or tower. Resistance cast aluminum alloy, high-class rubber and center reinforcing assembly
    detail >>
  • S Type Drop Wire Clamp for Drop Cable with Galvanized hook

    drop wire Clamp with Galvanized hook is used for the attachment of external connection aerial drop cables of 1 pair of conductors in parallel.
    detail >>
  • Optical Fiber Cable GYFTY UG CABLE OPTIC

    The outdoor GYFTY fiber optic cable is the optical cable that enquels the layer with the inner sheath of the PE sheath shield and the steel tape. It has low attenuation and dispersion, special control that exceeds the length and the technology that varies from the coat, besides it has double jacket design that enhances the crushing performance.
    detail >>
  • RUG GJBFJH Fiber Optical CABLE

    GJBFJH-8B6a2 Profile View Cable Parameters Items   Specifications   Fiber type   G.657A2   Fiber count   8   tight buffer     Dimension   0.85±0.05mm   Material   LSZH           Simplex cable   Dimension   2.0±0.1mm   Color   Yellow   Material   LSZH   Strength member   Aramid Yarn   Marking   <1>、<2>、<3>、<4>   Strength Member   Dimension   FRP   Jacket   Dimension   10.5±0.4mm   Material   LSZH (Yellow) Mechanical and Environmental Characteristics Items   Unite   Specifications   Tension(Long Term)   N   500 Tension(Short Term)     N   1000…
    detail >>
  • S-hook Tension Clamp for Drop Fiber Cable

    S-hook FTTH Cable Tension Clamp is tension clamp for FTTH drop cable. The drop wire clamp is to connect a triplex overhead entrance cable to a devices or buildings.Widely used both indoor installation and outdoor installation
    detail >>
  • 48Core ADSS Aerial Fiber Optical Cable 400M Span

    48Core ADSS Aerial Fiber Optical Cable 400M Span
    detail >>
  • J hook Suspension Clamp for ADSS fiber cables

    J hook suspension clamp is designed to suspend ADSS round optical fiber cable during construction of transmission line.  The suspension clamp is designed to provide a suspension for Ø8 to 20mm aerial ADSS cables at intermediate poles on cable routes with angle< 20° on access networks (spans up to 100m).
    detail >>
  • GYFXY Fiber Optic Cable | 24core Outdoor Non-Metallic Loose Tube Fiber Cable

    GYFXY Fiber Optic Cable 24core Outdoor Non-Metallic Loose Tube, 2FRP
    detail >>
  • Cable Tension Clamp for FTTH drop cable

    Cable Tension clamp for FTTH drop cable. The drop wire clamp is to connect a triplex overhead entrance cable to a devices or buildings.Widely used both indoor installation and outdoor installation.Provided with a serrated shim to increase hold on drop wire. Used to support  one and two pair  telephone drop wire at span clamps,drive hooks, and various drop attachments.  The s hook drop wire clamps can withstand the rigors of all environmental conditions in the telecommunications outside plant. The placement of slots and a hole in the clamp’s inner wedges allow for proper cable slack adjustment, tensioning and assistance with…
    detail >>
  • GYXTW Outdoor Multimode OM3 Fiber Optic Cable

    2-12 core multimode fiber, Working wavelength 850nm and 1310nm, Central loose tube structure,Moisture-proof: Double-sided plastic coated rolled steel tape bonded PE sheath · Two thin round steel wires of the same diameter are entrained in the outer sheath The quality and technical indicators of this product fully comply with the requirements of ITU-T G.652 and its accessories, and comply with the relevant technical specifications of IEC, especially IEC 60793 and IEC 60794 parts. At the same time, it also meets the technical requirements of the corresponding national standards and the Ministry of Information Industry standard YD/T 901-2009 for optical cables,…
    detail >>
  • GYXTW Outdoor Single Mode Fiber Optic Cable

    The quality and technical indicators of the single mode fiber cable fully comply with ITU-T G.652, and comply with the relevant technical specifications of IEC, especially IEC 60793 and IEC 60794 parts. The quality and technical indicators of this product fully comply with the requirements of ITU-T G.652 and its accessories, and comply with the relevant technical specifications of IEC, especially IEC 60793 and IEC 60794 parts. At the same time, it also meets the technical requirements of the corresponding national standards and the Ministry of Information Industry standard YD/T 901-2009 for optical cables, raw materials should meet the requirements…
    detail >>
  • ASU80 Outdoor Aerial Cable

    ASU80 Outdoor Aerial Cable has loose tube construction and a water-resistant gel substance. It is applicable for short span aerial and duct installation and is ideal for long-distance communication.
    detail >>
  • 2 Cores FTTH Flat Outdoor Fiber Optic Drop Cable

    2 Cores FTTH Flat Outdoor Cable is made up of 2 cores of G.657A fiber, two parallel FRP strength member covered optical fiber units, an LSZH jacket, and a separate messenger wire.
    detail >>
  • ADSS-24F-100M Span Aerial Fiber Optic ADSS Cable

    ADSS Cables are strong enough to enable for installation of lengths of up to 1000 meters between support towers. They have excellent mechanical performance, light weight and small diameter.
    detail >>
  • FTTH 2 Cores Fiber Optic Indoor Drop Cable

    2 Cores Fiber Optic Indoor Drop Cable has simple structure, light weight and high tensile strength. Two parallel steel wires/FRP strength members ensure tensile strength and crush resistance.
    detail >>
  • ADSS Cable Steel Helical Tension Clamp

    The self-adjusting cable tension clamp is used to secure ADSS optical fiber cable transmission lines. It can be installed on pole brackets or hooks using the stainless steel bail.
    detail >>
  • FTTH Plastic Fiber Optic Drop Wire Clamp

    Drop wire clamp is commonly used to hold telephone drop wire in place at drive hooks, span clamps, and other drop attachments. It is made up of three parts: a shell, a shim, and a wedge with a bail wire.
    detail >>
  • ADSS Tension Anchor Clamp / Cable Wedge Clamp

    ADSS cable anchor clamp is used to secure insulated service lines with two or four conductors to a pole or wall. It is made up of a body, wedges, and a removable and adjustable bail or pad.
    detail >>
  • FTTH Fiber Optic Anchor Tension Clamp

    Anchor tension clamp can be used for the low-voltage ABC cable. It is is used to secure aerial bundle cables to branches of trunk lines or trunk lines, and is composed of weather and UV resistant polymer.
    detail >>
1 2 3 Next > Page 1 / 3
Leave Your Message