SFP+ Direct Attach Passive Copper Cables
Short Description:
The SFP+ passive cable assemblies are high performance, cost effective I/O solutions for 10G Ethernet and 10G Fiber Channel applications.Description
Specification
Application
Order information
Q&A
Product Tags
Reviews
Description
The SFP+ passive cable assemblies are high performance, cost effective I/O solutions for 10G Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable assemblies meet and exceed Gigabit Ethernet and Fiber Channel industry standard requirements for performance and reliability.
Features
- Support for multi-gigabit data rates up to 10.5Gbps
- 1m、3m、5m Reach
- Data rates backward compatible to 1Gbps
- Hot-pluggable SFP 20PIN footprint
- I/O Connector designed for high speed differential signal applications
- Improved Pluggable Form Factor(IPF) compliant for enhanced EMI/EMC performance
- Compatible to SFP+ MSA
- Temperature Range: 0~ 70 °C
- RoHS Compatible
Specification
Recommended Operating Conditions
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Storage Ambient Temperature |
-40 |
+85 |
°C |
||
Operating Case Temperature |
Tc |
0 |
+70 |
°C |
Systems
Performance |
Media |
10.5 Gpbs line speed, full duplexBit error rate: better than 10E-12 |
Hot-pluggable, industry-standard Small Form-Factor Pluggable(SFP+) copper cable, available as 1m,3m or 5m. |
Pin Descriptions
Pin |
Logic |
Symbol |
Name/Description |
Notes |
1 |
VeeT |
Transmitter Ground |
||
2 |
LV-TTL-O |
TX_Fault |
N/A |
1 |
3 |
LV-TTL-I |
TX_DIS |
Transmitter Disable |
2 |
4 |
LV-TTL-I/O |
SDA |
Tow Wire Serial Data |
|
5 |
LV-TTL-I |
SCL |
Tow Wire Serial Clock |
|
6 |
MOD_DEF0 |
Module present, connect to VeeT |
||
7 |
LV-TTL-I |
RS0 |
N/A |
1 |
8 |
LV-TTL-O |
LOS |
LOS of Signal |
2 |
9 |
LV-TTL-I |
RS1 |
N/A |
1 |
10 |
VeeR |
Reciever Ground |
||
11 |
VeeR |
Reciever Ground |
||
12 |
CML-O |
RD- |
Reciever Data Inverted |
|
13 |
CML-O |
RD+ |
Reciever Data Non-Inverted |
|
14 |
VeeR |
Reciever Ground |
||
15 |
VccR |
Reciever Supply 3.3V |
||
16 |
VccT |
Transmitter Supply 3.3V |
||
17 |
VeeT |
Transmitter Ground |
||
18 |
CML-I |
TD+ |
Transmitter Data Non-Inverted |
|
19 |
CML_I |
TD- |
Transmitter Data Inverted |
|
20 |
VeeT |
Transmitter Ground |
1. Signals not supported in SFP+ Copper pulled-down to VeeT with 30K ohms resistor
2. Passive cable assemblies do not support LOS and TX_DIS
Mechanical Dimensions
S/N label on the Cable:
Application
- High capacity I/O in Storage Area Networks, Network Attached Storage, and Storage Servers
- Switched fabric I/O such as ultra high bandwidth switches and routers
- Data center cabling infrastructure
- High density connections between networking equipment
Order information
Product Model | Descriptions | Inquiry |
---|---|---|
BD-10GSFP-Cable-3001C | SFP+ Direct Attach Passive Cable (10GSFP+Cu), 1m, AWG:30, 0ºC ~ +70ºC | Request Price |
BD-10GSFP-Cable-2603C | SFP+ Direct Attach Passive Cable (10GSFP+Cu), 3m, AWG:26,0ºC ~ +70ºC | Request Price |
BD-10GSFP-Cable-2405C | SFP+ Direct Attach Passive Cable (10GSFP+Cu), 5m, AWG:24,0ºC ~ +70ºC | Request Price |
Q&A
Related Article:
How to Choose Fiber Optical Transceivers