光缆

光缆

  • FTTH引入线电缆吊架馈线夹

    Drop Cable Hanger Clamp is composed of stainless steel and will last a long time. It can be installed on walls, poles with drive hooks, pole brackets, FTTH brackets, and other drop wire fitting or hardware are possible with the stainless steel tail wire/bail.
    详细>>
  • GYFXY 光缆 | 24芯户外非金属松套管光缆

    GYFXY Fiber Optic Cable 24core Outdoor Non-Metallic Loose Tube, 2FRP
    详细>>
  • 用于 FTTH 引入电缆的电缆张力夹

    Cable Tension clamp for FTTH drop cable. The drop wire clamp is to connect a triplex overhead entrance cable to a devices or buildings.Widely used both indoor installation and outdoor installation.Provided with a serrated shim to increase hold on drop wire. Used to support  one and two pair  telephone drop wire at span clamps,drive hooks, and various drop attachments.  The s hook drop wire clamps can withstand the rigors of all environmental conditions in the telecommunications outside plant. The placement of slots and a hole in the clamp’s inner wedges allow for proper cable slack adjustment, tensioning and assistance with…
    详细>>
  • GYXTW户外多模OM3光缆

    2-12 core multimode fiber, Working wavelength 850nm and 1310nm, Central loose tube structure,Moisture-proof: Double-sided plastic coated rolled steel tape bonded PE sheath · Two thin round steel wires of the same diameter are entrained in the outer sheath The quality and technical indicators of this product fully comply with the requirements of ITU-T G.652 and its accessories, and comply with the relevant technical specifications of IEC, especially IEC 60793 and IEC 60794 parts. At the same time, it also meets the technical requirements of the corresponding national standards and the Ministry of Information Industry standard YD/T 901-2009 for optical cables,…
    详细>>
  • GYXTW户外单模光缆

    The quality and technical indicators of the single mode fiber cable fully comply with ITU-T G.652, and comply with the relevant technical specifications of IEC, especially IEC 60793 and IEC 60794 parts. The quality and technical indicators of this product fully comply with the requirements of ITU-T G.652 and its accessories, and comply with the relevant technical specifications of IEC, especially IEC 60793 and IEC 60794 parts. At the same time, it also meets the technical requirements of the corresponding national standards and the Ministry of Information Industry standard YD/T 901-2009 for optical cables, raw materials should meet the requirements…
    详细>>
  • ASU80 室外架空电缆

    ASU80 室外架空电缆具有松套管结构和防水凝胶物质。适用于短距离架空和管道安装,是远距离通信的理想选择。
    详细>>
  • 2芯FTTH扁平户外光纤引入电缆

    2芯FTTH户外扁平光缆由2芯G.657A光纤、两根平行的玻璃钢加强芯包覆光纤单元、低烟无卤护套和单独的信使线组成。
    详细>>
  • ADSS-24F-100M 跨度架空光纤 ADSS 电缆

    ADSS Cables are strong enough to enable for installation of lengths of up to 1000 meters between support towers. They have excellent mechanical performance, light weight and small diameter.
    详细>>
  • FTTH 2芯光纤室内引入光缆

    二芯光纤室内引入光缆结构简单,重量轻,抗拉强度高。两根平行钢丝/玻璃钢加强件确保抗拉强度和抗压强度。
    详细>>
  • ADSS 电缆钢螺旋张力夹

    The self-adjusting cable tension clamp is used to secure ADSS optical fiber cable transmission lines. It can be installed on pole brackets or hooks using the stainless steel bail.
    详细>>
  • FTTH塑料光纤落线夹

    Drop wire clamp is commonly used to hold telephone drop wire in place at drive hooks, span clamps, and other drop attachments. It is made up of three parts: a shell, a shim, and a wedge with a bail wire.
    详细>>
  • ADSS 张力锚夹/电缆楔形夹

    ADSS cable anchor clamp is used to secure insulated service lines with two or four conductors to a pole or wall. It is made up of a body, wedges, and a removable and adjustable bail or pad.
    详细>>
  • FTTH光纤锚拉力钳

    Anchor tension clamp can be used for the low-voltage ABC cable. It is is used to secure aerial bundle cables to branches of trunk lines or trunk lines, and is composed of weather and UV resistant polymer.
    详细>>
  • 4mm 7mm 10mm 带钢钉的光纤电缆夹

    Fiber Optic Cable Clips with Steel Nails allow you to secure runs of round cables like coax to walls and floorboards for a cleaner look and prevent tripping over loose cables.
    详细>>
  • FTTH 引入光缆应变夹

    FTTH Fiber Optic Drop Cable Strain Clamps can be installed on pole brackets and SS hooks with the help of a stainless steel wire bail. Tension clamps and drop wire cable brackets for FTTH are available singly or as a kit.
    详细>>
  • ADSS 电缆塑料楔形锚固应变夹

    Anchor Clamp is made out of self-adjusting plastic wedges that safely hold the optical cable. It is designed to anchor ADSS optical fiber cable transmission lines.
    详细>>
  • ADSS UPB 电缆锚固夹极支架

    ADSS Cable UPB Anchoring Clamp Pole Bracket is made of a high strength aluminum alloy with a high mechanical strength. It can be used in all installation condition.
    详细>>
  • Dead End Guy Grip 预成型张力夹 ADSS OPGW

    The self-adjusting dead end guy grip is used to secure ADSS optical fiber cable transmission lines. It can be inastalled on pole brackets or hooks using the stainless steel bail.
    详细>>
  • 光缆可调图 8 电缆接头 光纤图 8 电缆张力夹

    Features Suspension device: J Suspension Clamp of ADSS cable for span < 100m. Figure 8 Cable Tension clamp Wire Range: 10-15mm/ 15-20mm Figure 8 Cable Tension clamp Breaking load: 12KN Figure 8 Cable Tension clamp Cable Type: FO Round Figure 8 Cable Tension clamp Production Type : Suspension
    详细>>
  • 光学金属带套件不锈钢胶带 Banda de Acero Inoxidable

    Features ●  Attractive bright shining finish. ●  Round and smooth safety edges for easy handling. ●  High strength. ●  Impressive corrosion resistance properties! ●  It`s the best selling stainless steel strapping!
    详细>>
Leave Your Message