FTTH安装配件

Drop Cable Hanger Clamp is composed of stainless steel and will last a long time. It can be installed on walls, poles with drive hooks, pole brackets, FTTH brackets, and other drop wire fitting or hardware are possible with the stainless steel tail wire/bail.

ADSS slack cable storage bracket

Preformed suspension clamp for mid span ADSS fiber optical cable, overhead transmission line to pole or tower. Resistance cast aluminum alloy, high-class rubber and center reinforcing assembly

drop wire Clamp with Galvanized hook is used for the attachment of external connection aerial drop cables of 1 pair of conductors in parallel.

S-hook FTTH Cable Tension Clamp is tension clamp for FTTH drop cable. The drop wire clamp is to connect a triplex overhead entrance cable to a devices or buildings.Widely used both indoor installation and outdoor installation

J hook suspension clamp is designed to suspend ADSS round optical fiber cable during construction of transmission line.  The suspension clamp is designed to provide a suspension for Ø8 to 20mm aerial ADSS cables at intermediate poles on cable routes with angle 详细>>

Cable Tension clamp for FTTH drop cable. The drop wire clamp is to connect a triplex overhead entrance cable to a devices or buildings.Widely used both indoor installation and outdoor installation.Provided with a serrated shim to increase hold on drop wire. Used to support  one and two pair  telephone drop wire at span clamps,drive hooks, and various drop attachments.  The s hook drop wire clamps can withstand the rigors of all environmental conditions in the telecommunications outside plant. The placement of slots and a hole in the clamp’s inner wedges allow for proper cable slack adjustment, tensioning and assistance with…

The self-adjusting cable tension clamp is used to secure ADSS optical fiber cable transmission lines. It can be installed on pole brackets or hooks using the stainless steel bail.

Drop wire clamp is commonly used to hold telephone drop wire in place at drive hooks, span clamps, and other drop attachments. It is made up of three parts: a shell, a shim, and a wedge with a bail wire.

ADSS cable anchor clamp is used to secure insulated service lines with two or four conductors to a pole or wall. It is made up of a body, wedges, and a removable and adjustable bail or pad.

Anchor tension clamp can be used for the low-voltage ABC cable. It is is used to secure aerial bundle cables to branches of trunk lines or trunk lines, and is composed of weather and UV resistant polymer.

Fiber Optic Cable Clips with Steel Nails allow you to secure runs of round cables like coax to walls and floorboards for a cleaner look and prevent tripping over loose cables.

FTTH Fiber Optic Drop Cable Strain Clamps can be installed on pole brackets and SS hooks with the help of a stainless steel wire bail. Tension clamps and drop wire cable brackets for FTTH are available singly or as a kit.

Anchor Clamp is made out of self-adjusting plastic wedges that safely hold the optical cable. It is designed to anchor ADSS optical fiber cable transmission lines.

ADSS Cable UPB Anchoring Clamp Pole Bracket is made of a high strength aluminum alloy with a high mechanical strength. It can be used in all installation condition.

The self-adjusting dead end guy grip is used to secure ADSS optical fiber cable transmission lines. It can be inastalled on pole brackets or hooks using the stainless steel bail.

Features Suspension device: J Suspension Clamp of ADSS cable for span < 100m. Figure 8 Cable Tension clamp Wire Range: 10-15mm/ 15-20mm Figure 8 Cable Tension clamp Breaking load: 12KN Figure 8 Cable Tension clamp Cable Type: FO Round Figure 8 Cable Tension clamp Production Type : Suspension

Optical Metal Banding Kit Stainless Steel Tape Band Banda de Acero Inoxidable,other called stainless steel band as a fastening solution was designed to attach industrial fittings,anchoring and suspension assenblies and other devices to the poles. Optical Metal Banding Kit Stainless Steel Tape Band Banda de Acero Inoxidable is use with electrical fastening solutions,with LV,HV,ABC cable fittings,with fiber optic cable accessories in construction of passive optical networks,in marine and railway transportation,mining,oil and gas industries,fixing sighn to power line. Stainless Straapping Straps are made of stainless steel different grades: 201,202,304,316,409.S/s grade 316 has a superior rust corrosion resistance to be used in…

Aluminum drop wire clamp for telecom cable is a type of wire clamp.

The universal bracket is made from galvanized steel by cold stamping production method.