-
16E1转4以太网融合协议转换器
Functions BD-16E1-4ETH-CON is 16E1 to 4 ethernet convergence protocol converter, which is multi-E1 convergency type bridge communication equipement. The device can be used as 16E1 to 4FE access gateway. The convergence converter’s bandwidth can be divided into 1~16channels according to user’s requirement. One or multi-E1 lines are divided into one channel which carries the Ethernet…详细>> -
TDM 16 E1 以太网至以太网转换器
The 16E1 to ethernet converter is the IP ethernet over TDM converter, which supports the conversion from MAC frames to 1 – 4 E1 lines. The maximum bit rate is 7.8Mbps (4E1 lines). The 4E1 converter not only provides alarms and status of the E1 line but also Ethernet interface together with advanced management functions,…详细>> -
8路E1转以太网GFP转换器
The 8 e1 over Ethernet converter is the IP ethernet over TDM converter, which supports the conversion from MAC frames to 8 E1 lines. The maximum bit rate is 15.8Mbps (8 E1 lines). The 8E1 converter not only provides alarms and status of the E1 line but also Ethernet interface together with advanced management functions,…详细>> -
4 E1 转以太网 GFP 转换器
The 4 E1 to ethernet converter is the IP ethernet over TDM converter, which supports the conversion from MAC frames to 1 – 4 E1 lines. The maximum bit rate is 7.8Mbps (4E1 lines). The 4E1 converter not only provides alarms and status of the E1 line but also Ethernet interface together with advanced management…详细>> -
24E1 紧凑型千兆位以太网聚合器
BD-24E1-GE-CON supports 16 VCG channels, and each VCG channel can be configured to work in single E1 mode or Multi-E1 conversion mode independently, In single E1 conversion mode, each channel bandwidth is one E1; In multi-E1 conversion mode, the maximum bandwidth of each channel is 16 E1.详细>>
留言
