RS232/V35/E1 以太网转换器系列

以太网 E1 转换器是具有以太网桥接功能的单端口 E1，可提供高速 LAN 到 WAN 连接

IEEE C37.94 至 E1 转换器将变电站中的光纤接口转换为 E1 通信链路。 点对点应用。

Ø Can realize monitor and control of remote equipment, OAM management data did not take up user’s timeslot and save E1 bandwidth

Description The E1 Timeslot ADD/DROP Ethernet converter can extract partial time-slots from E1 channel to implement multiplexing transmission of 1/2/4/8 channel(s) of RS232/RS422/RS485 serial port data or Ethernet data, and the equipment can construct chain network by cascade connection, and the central server can collect serial port data or Ethernet data of E1 time-slots, and…

The 4u rack mount chassis(BD-CH04) can support for 16 interface fiber card. every card could work independently and different types of interface converter card can be inserted in one rack；the system power supply is separated from interface converter by communication insulation technology, so that the reliability of the system can be ensured

E1 G.703 to 31 channel RS232 converter, 31 channel RS232 over E1 G.703 converter PRODUCT CHARACTERISTIC ● RS232 rate support 0~115200Kbps self-adapt; ● Support RS232 interface (TXD,RXD,GND) ● RS232 support hot-plug, connection to DTE or TCE device; ● offer 2 kinds of loop-return function, namely E1 self-looping at local end (ANA) and RS232 self-looping at…

E1 G703 converter to 16channel RS232 ,16 channel RS232 over E1 G.703 converter CHARACTERISTIC ● RS232 rate support 0~115200Kbps self-adapt; ● Support RS232 interface (TXD,RXD,GND) ● RS232 support hot-plug, connection to DTE or TCE device; ● offer 2 kinds of loop-return function, namely E1 self-looping at local end (ANA) and RS232 self-looping at local end…

E1 G.703 to 8 channel RS232 converter, 8 channel RS232 over E1 G.703 converter CHARACTERISTIC ● RS232 rate support 0~115200Kbps self-adapt; ● Support RS232 interface (TXD,RXD,GND) ● RS232 support hot-plug, connection to DTE or TCE device; ● offer 2 kinds of loop-return function, namely E1 self-looping at local end (ANA) and RS232 self-looping at local…

E1 to Ethernet and RS232 converter could Plugging directly into the 10/100Base-T port of a hub or LAN switch, the E1 to Ethernet converter provides FE1 access at connection data rates of 2.048 Mbps, or nx64 (n=1 to 32 channels). The E1 to Ethernet and RS232 converter is an excellent choice for internet access as…

E1 Impedance: 75Ω(unbalance) or 120Ω(balance)

FE1 to RS232 converter(frame) provides conversion between ITU-T G.703 standard E1 interface and single RS232 port and provides safe and seamless connection of communication between different devices with different interfaces. Random time slot can be chosen from G.703 standard E1 to compose RS232 channel with the rate of N*64K(N=1~32). It is suitable for the case…

E1 Impedance: 75Ω(unbalance) and 120Ω(balance)

10/100BaseT Ethernet converter CHARACTERISTIC ● E1 G.703 to V.35 10/100BaseT Ethernet converter realizes long-distance monitoring of this end equipment to the far-end equipment (two-row indicating lamp, upper row indicating local status, lower row indicating far-end status); ● based on self-copyright IC; ● overall rate of V.35 and Ethernet is 1984K, Ethernet rate will be allocated…

Overview: BD-E3-ETH is cost-effective intelligent DS3 / E3 to ethernet converter which offers a cost-effective connection between E3/DS3 services and 10/100BaseT LANs. They enable service providers and ISPs to provide transparent Ethernet services without interfering with user traffic. In addition to point to point application, the equipment can also work with Baudcom center device as…

Product function: BD-16E1-OETH converter uses reverse multiplexing technology to transmit 10/100BaseT data with bonding multi E1 channels, thus realizing conversion between 1-16 E1 channels and Ethernet interface. 16E1 to Optical Ethernet converter can transmit signals point-to-point from E1 channel to RJ45 interface to realize connection between E1 channel and Ethernet. Being different from general long-distance…

Overview: Time Slot drop and insert system consists of node equipment and central convergence server, and node equipment can extract partial time-slots from E1 channel to implement multiplexing transmission of 1/2/4/8 channel(s) of RS232/RS422/RS485 serial port data or Ethernet data, and the node equipment can construct chain network by cascade connection, and the central server…

Overview: Time Slot Extraction and Insertion system consists of node equipment and central convergence server, and node equipment can extract partial time-slots from E1 channel to implement multiplexing transmission of 1/2/4/8 channel(s) of RS232/RS422/RS485 serial port data or Ethernet data, and the node equipment can construct chain network by cascade connection, and the central server…

Functions Baudcom’s 16 E1 to Ethernet converter realize Ethernet transparent transmission over 1~16E1 with maximum transmit rate of 31.68Mb/s. The 16 E1/Ethernet converter adopts with international standard protocol (G.7041、G.7042、G.7043、G.8040) at all layers and able to intercommunicate with other supplier’s products followed the same standard. The device not only provides perfect alarm/status indication for E1 and…

Functions 8E1 to optical ethernet (100Base-FX) converter use back multiplexing technology, transfer 10M/100M Ethernet data by using multi E1 channels. Realize convert between 1 to 8 E1 channels and Ethernet interface. It can transmit signal of E1 channel to RJ45 interface point to point, realize the connection of E1 channel and Ethernet. It different from…

4以太网至8E1转换器是一种以太网E1转换器，可实现8E1到以太网LAN转换器，支持SNMP和控制台管理，GUI（图形用户界面）管理，操作简便。E1支持75ohm和120ohm E1接口。