SFP BiDi Transceiver 10G WDM for 20km
简短的介绍：
Description The Baudcom 10G SFP Bidi Transceiver is a high-performance, hot-pluggable transceiver designed for 10GBASE-LR, 10GBASE-LW, and 10GBASE-BX Ethernet applications. Operating at data rates between 9.95Gb/s and 10.5Gb/s, this transceiver supports a maximum link length of 20km over single-mode fiber (SMF), making it ideal for long-distance network conn…描述
规格
应用
命令
下载/常见问题
产品标签
评论
描述
描述
The Baudcom 10G 小号FP Bidi Transceiver is a high-performance, hot-pluggable transceiver designed for 10GBASE-LR, 10GBASE-LW, and 10GBASE-BX Ethernet applications. Operating at data rates between 9.95Gb/s and 10.5Gb/s, this transceiver supports a maximum link length of 20km over single-mode fiber (SMF), making it ideal for long-distance network connections. Featuring a 1270/1330nm DFB laser transmitter and a 1330/1270nm receiver, this module ensures stable and reliable performance across a wide temperature range of 0°C to +70°C. It is fully compliant with IEEE 802.3ae 10GBASE-BX standards and offers digital diagnostic capabilities, including built-in monitoring for optimal network health.
This 小号FP Bidi 收发器 is energy-efficient with a low power dissipation of less than 2W, and its compact design allows for easy integration into high-density 10GbE systems. The module operates on a +3.3V and +1.8V power supply, is fully RoHS compliant, and supports loopback functionality for troubleshooting. With advanced electromagnetic shielding, it ensures minimal interference, enhancing signal integrity in demanding environments.
XFP收发器特性
High-Speed Data Transfer: Supports data rates from 9.95Gb/s to 10.5Gb/s for stable and high-speed communication.
Long-Distance Transmission: Achieve up to 20km transmission distance over single-mode fiber (SMF) for extended network reach.
Advanced Wavelength Division Multiplexing (波分复用): Utilizes a 1270/1330nm DFB laser transmitter and 1330/1270nm receiver for reliable data transmission.
Hot-Pluggable: Designed with an SFP form factor, allowing for easy installation and replacement without powering down the system.
Wide Operating Temperature Range: Withstands a temperature range of 0°C to 70°C, making it suitable for diverse network environments.
Power-Efficient: Consumes less than 2W of power, ensuring energy-efficient operation.
Digital Diagnostics: Built-in digital monitoring functions for real-time diagnostics and performance tracking.
RoHS Compliant: Meets environmental standards for safety and sustainability.
Loopback Support: Supports loopback functionality for quick diagnostics and troubleshooting.
兼容性： Works with 10GBASE-LR, 10GBASE-LW, and 10GBASE-BX Ethernet standards.
绝对最大额定值
| 参数 | 符号 | 最小 | 马克斯 | 单元 | 参考。 |
| 储存环境温度范围 | -40 | +85 | ℃ | ||
| 供电外壳温度范围 | 0 | +70 | ℃ | ||
| 工作相对湿度 | RH | 85 | ％ | ||
| 电源电压范围@3.3V | 电源电压3 | 0 | 3.6 | V | |
| 电源电压范围@1.8V | 0 | 1.98 | V |
任何超过最大额定值的应力都可能导致永久性损坏。 仅在推荐的工作条件下才能保证器件规格。
电气特性
| 参数 | 符号 | 最小 | 典型 | 马克斯 | 单元 | 注 | ||
| 工作外壳温度范围 | TC | 0 | +70 | ℃ | ||||
| 电源电压@3.3V | 电源电压3 | 3.13 | 3.3 | 3.47 | V | |||
| 电源电压@1.8V | 1.62 | 1.8 | 1.98 | |||||
| 模块总功率 | P | 2 | w ^ | |||||
| 发射机 | ||||||||
| 输入差分阻抗 | 凛 | 100 | Ω | 1 | ||||
| 差分数据输入摆幅 | VIN，第 | 120 | 820 | 毫伏 | ||||
| 发送禁用电压 | VD | 2.0 | VCC | V | ||||
| 发送使能电压 | VEN | 0 | 0.8 | V | ||||
| 发送禁用断言时间 | 10 | 我们 | ||||||
| 接收器 | ||||||||
| 差分数据输出摆幅 | VOUT，第 | 340 | 850 | 毫伏 | ||||
| 数据输出上升时间 | Ť[R | 38 | PS | 2 | ||||
| 数据输出下降时间 | ŤF | 38 | PS | 2 | ||||
| 视距故障 | V视距故障 | Vcc – 0.5 | VCC主办 | V | 3 | |||
| 视距正常 | V视距范数 | GND | 接地+0.5 | V | 3 | |||
| 电源抑制 | PSR | 请参阅下面的注释 3 | 4 | |||||
SFP BIDI transceiver Notes:
- 内部交流耦合后。
- 20 – 80 %
- 信号丢失是集电极开路，用 4.7k – 10kohm 电阻上拉至 3.15 – 3.6V。 逻辑0表示正常工作； 逻辑 1 表示未检测到信号。
- 根据第 2.7.1 节。 在 XFP MSA 规范中。
光学特性
| 参数 | 符号 | 最小 | 典型 | 马克斯 | 单元 | 参考。 |
| 发射机 | ||||||
| 光输出功率 | P | -2 | 2 | dBm的 | ||
| 光波长 | λ | 1260 | 1270 | 1280 | 纳米 | |
| 1320 | 1330 | 1340 | ||||
| 边模抑制比 | SMSR | 30 | 分贝 | |||
| 消光比 | ER | 3.5 | 分贝 | 1 | ||
| OFF 发射机的平均发射功率 | POFF | -30 | dBm的 | |||
| 发射抖动 | TXĴ | 符合各标准要求 | ||||
| 接收器 | ||||||
| 接收灵敏度 | RSENS | -14 | dBm的 | 2 | ||
| OMA 中的接收器灵敏度 | RSENS | -12.5 | dBm的 | 2 | ||
| 最大输入功率 | PMAX | +0.5 | dBm的 | |||
| 光中心波长 | λC | 1320 | 1340 | 纳米 | ||
| 1260 | 1280 | |||||
| LOS 反断言 | LOSD | -18 | dBm的 | |||
| LOS报警 | LOS一个 | -30 | dBm的 | |||
| LOS 迟滞 | 1 | 5 | 分贝 | |||
sfp收发器单模注意事项：
1、PRBS 231-1 测试模式@10.3125Gbps。
2、PRBS 231-1 测试模式@10.3125Gbps，BER≤10-12.
规格
应用
10GBASE-LR，10.3125Gbps
10GBASE-LW，9.953Gbps
¡ 10GBASE-BX 10G 以太网
10GBASE-BX 10G 以太网，带 FEC
命令
下载/常见问题
产品标签
评论
0条评论
5
