10G XFP BIDI Transceiver
Short Description:
10G XFP BIDI Modules, single fiber, WDM, up to 80KM.Description
Specification
Application
Order information
Q&A
Product Tags
Reviews
Description
Features
¨ Supports 9.95Gb/s to 10.5Gb/s bit rates
¨ Hot-pluggable XFP footprint
¨ Maximum link length of 20km with SMF
¨ 1270/1330nm DFB laser Transmitter and 1330/1270nm Receiver
¨ XFP MSA package with LC connector
¨ No reference clock required
¨ Loop Back Support.
¨ +3.3V,+1.8V power supply
¨ Power dissipation <2W
¨ Compatible with RoHS
¨ Built-in digital diagnostic functions
¨ Temperature range 0°C to 70°C
Applications
¨ 10GBASE-LR at 10.3125Gbps
¨ 10GBASE-LW at 9.953Gbps
¨ 10GBASE-BX 10G Ethernet
¨ 10GBASE-BX 10G Ethernet with FEC
Description
Baudcom 10G XFP WDM module is compliant with the IEEE803.3ae 10Gbase-Bx. and transmission distance up to 20km on SMF.
The transceiver module comprises a transmitter with a 1270/1330nm DFB laser transmitter, an integrated 1330/1270nm detector preamplifier(IDP) mounted in an optical header and a limiting post-amplifier IC. Transmitter and receiver are separate within a wide temperature range of 0℃ to +70℃ and offers optimum heat dissipation and excellent electromagnetic shielding thus enabling high port densities for 10 GbE systems.
Specification
Absolute Maximum Ratings
Parameter |
Symbol |
Min |
Max |
Unit |
Ref. |
Storage Ambient Temperature Range |
-40 |
+85 |
℃ |
|
|
Powered case Temperature Range |
0 |
+70 |
℃ |
|
|
Operating Relative Humidity |
RH |
85 |
% |
|
|
Supply Voltage Range @3.3V |
Vcc3 |
0 |
3.6 |
V |
|
Supply Voltage Range @ 1.8V |
0 |
1.98 |
V |
|
Any stress beyond the maximum ratings can result in permanent damage. The device specifications are guaranteed only under the recommended operating conditions.
Electrical Characteristics
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Note |
||
Operating CaseTemperature Range |
Tc |
0 |
+70 |
℃ |
||||
Power Supply Voltage @ 3.3V |
Vcc3 |
3.13 |
3.3 |
3.47 |
V |
|||
Power Supply Voltage @ 1.8V |
1.62 |
1.8 |
1.98 |
|||||
Module total power |
P |
2 |
W |
|||||
Transmitter |
||||||||
Input differential impedance |
Rin |
100 |
Ω |
1 |
||||
Differential data input swing |
Vin,pp |
120 |
820 |
mV |
||||
Transmit Disable Voltage |
VD |
2.0 |
VCC |
V |
||||
Transmit Enable Voltage |
VEN |
0 |
0.8 |
V |
||||
Transmit Disable Assert Time |
10 |
us |
||||||
Receiver |
||||||||
Differential data output swing |
Vout,pp |
340 |
850 |
mV |
||||
Data output rise time |
tr |
38 |
ps |
2 |
||||
Data output fall time |
tf |
38 |
ps |
2 |
||||
LOS Fault |
VLOS fault |
Vcc – 0.5 |
VccHOST |
V |
3 |
|||
LOS Normal |
VLOS norm |
GND |
GND+0.5 |
V |
3 |
|||
Power Supply Rejection |
PSR |
See Note 3 below |
4 |
|||||
Notes:
1. After internal AC coupling.
2. 20 – 80 %
3. Loss Of Signal is open collector to be pulled up with a 4.7k – 10kohm resistor to 3.15 – 3.6V. Logic 0 indicates normal operation; logic 1 indicates no signal detected.
4. Per Section 2.7.1. in the XFP MSA Specification.
Optical Characteristics
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Ref. |
Transmitter |
||||||
Optical output Power |
P |
-2 |
2 |
dBm |
||
Optical Wavelength |
λ |
1260 |
1270 |
1280 |
nm |
|
1320 |
1330 |
1340 |
||||
Side Mode Suppression Ratio |
SMSR |
30 |
dB |
|||
Optical Extinction Ratio |
ER |
3.5 |
dB |
1 |
||
Average Launch power of OFF transmitter |
POFF |
-30 |
dBm |
|||
Tx Jitter |
Txj |
Compliant with each standard requirements |
||||
Receiver |
||||||
Receiver Sensitivity |
RSENS |
-14 |
dBm |
2 |
||
Receiver Sensitivity in OMA |
RSENS |
-12.5 |
dBm |
2 |
||
Maximum Input Power |
PMAX |
+0.5 |
dBm |
|||
Optical Center Wavelength |
λC |
1320 |
1340 |
nm |
||
1260 |
1280 |
|||||
LOS De-Assert |
LOSD |
-18 |
dBm |
|||
LOS Assert |
LOSA |
-30 |
dBm |
|||
LOS Hysteresis |
1 |
5 |
dB |
Notes:
1, PRBS 231-1 test pattern @10.3125Gbps.
2, PRBS 231-1 test pattern @10.3125Gbps, BER≤10-12.
Application
Order information
Product Model | Descriptions | Inquiry |
---|---|---|
BDTRX873L1SN-20 | 1270nm DFB laser Transmitter and 1330nm Receiver, 10Gbps,20km,0C~ +70C | Request Price |
BDTRX837L1SN-20 | 1330nm DFB laser Transmitter and 1270nm Receiver, 10Gbps,20km,0C~+70C | Request Price |
Q&A
Question1: Is SFP module compatible with Zyxel, 3Com, Cisco and Huawei?
Answer: No, SFP module is compatible with Zyxel, 3Com and Cisco. For Huawei, it can only be compatible with the old models, because some new devices (such as S6800 series) requires special compatibility code.
Related Article:
How to Choose Fiber Optical Transceivers