Fiber Optic Fusion Splicer High-Performance Six-Motor

描述

This fiber optic fusion splicer delivers laboratory-grade splicing accuracy with the ruggedness required for the toughest field conditions. Its advanced six-motor core system and ultra-low splice loss technology ensure that every splice is reliable and permanent, significantly reducing rework and material waste. The IP52-rated dust-proof, waterproof, and shock-resistant body means you can work confidently in adverse weather, on dusty construction sites, or in cramped manholes without worrying about equipment failure. Large, clear 5-inch touchscreen with a new GUI, plus a high-precision ceramic V-groove for easy fiber placement and cleaning. It supports dual-directional fusion and provides 300 splice modes and 100 heating modes, so you can match the exact fiber type, environment, and protection sleeve requirements.

Portability and operating efficiency are critical when working on FTTH, FTTx, backbone, and other fiber optic projects. The compact design of the optical fiber fusion splicer allows the splicer to be carried and operated easily, while the built-in modular lithium-ion battery supports approximately 220 splicing and heating cycles, reducing the need for frequent recharging during a typical field job. The automatic environmental compensation system ensures consistent, low-loss splices regardless of temperature or humidity changes.

Optical fiber fusion splicer Main Characteristics

l 体积小、重量轻

l 7s快速拼接，18s高效加热

l 320倍图像放大，5mm熔断，超短切割长度

l 300组熔接模式、100组加热模式、10000组熔接记录/64张图像存储

l 陶瓷压脚、陶瓷V型槽、一体化夹具

l 双向熔断、自动熔断、智能热缩

l USB和SD卡接口，U盘自动更新

l 内置模块化锂离子电池，至少220次熔接和加热循环

l GUI（图形用户界面）和触摸屏，操作方便

l 防尘、防水、抗震，环境适应性更强

相关文章： 如何使用光纤熔接机

光纤熔接机可以熔接两根不同纤芯的光纤吗？操作方法如下

又小又轻

熔接机体积小、重量轻，携带方便，单手即可提起。

防水、防尘、抗震，环境适应性更强

满足IP52要求。

多合一修复器

一体式夹具满足包层直径80～150μm的多根光纤、跳线和橡套线的熔接需求。

一体化光纤夹具

图形界面和触摸屏

BD-FS-81在设计上采用全新的GUI和触摸屏。 操作人员可以通过图形界面简单、直接地对熔接机进行设置并了解熔接机的相关信息。

全新的GUI图形界面和触摸屏

智能热缩管

检测单元嵌入在加热器中。 只有将保护套放入加热器后才会启用加热功能，避免误操作。

听觉和检测单元

大容量可插拔锂离子电池

内置大容量可插拔锂离子电池，可满足全天工作需求（典型熔接和加热循环次数为220次）。

陶瓷V型槽和陶瓷压脚

高精度陶瓷V型槽，方便、准确地放置光纤，并使清理变得轻松。

手提箱

手提箱设计新颖、重量轻，内置紧凑型工作台。 打开或关闭盖子即可将其变成工作台。

Fiber optic fusion Splicer Technical Specifications

标准套餐：

 选项​​：

国外产品可替代：
住友光纤熔接机 TYPE-81C

相关链接：
Baudcom光纤熔接机可以支持多少种语言？