Multiplexor de fibra óptica E1

Overview 16E1 fiber optical multiplexer can multiplex to 16 E1 and 8Ethernet signals for transmission over an optical fiber, resulting in reaching a longer distance without a repeaters and superior performance compared to copper media. The 16E1 fiber optical multiplexer is the 16E1 point-to-point optical transport equipment that uses the FPGA chips and it is…

Description The 4E1 fiber multiplexer is part of Multi E1 and Fast Ethernet transmission system family, used to build a 150Mb/s optical point-to-point link. Based on an ASIC chip; it performs the transportation of 4 E1 and a fast Ethernet at full speed. The 4E1 fiber multiplexer (BD-OP-4E1-4ETH/M) also provides an order-wire and an auxiliary UART interface f…

Functions: ●   Multiplexer of 16*E1 (2.048Mb/s) channels, 2* 100Mbps   Ethernet channel and a clear asynchronous RS-232 data channel ●   1+1 Optical Redundancy Backup: Provide two plug-in I/O slotsfor dual optical interface cards.Protection of dual optical interfaceavailable to ensure that business will not be interrupted. ●   Flexible Configuration: Pr…

OVERVIEW:  BD-OP-8E1-4GE is the 8E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 8E1 and 4*10/100*1000M Ethernet data.The outer design use the standard 19 inches rack, so the volume is small, weight is light and operation is convenient and …

The 16E1 optical fiber multiplexer transmission capacity is 16E1, 4*100M Ethernet and 2channel RS232/RS485/RS422 data. LCD management,Console management and . Overview The 16E1 optical fiber multiplexer is 16E1 point-to-point optical transmission equipement with LCD management, uses the FPGA chips and easy to upgrade. It is single board structure and its lar…

Overview BD-OP-16E1-4GE is the 16E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 16E1 and 4*1000M line Ethernet data, one channel RS232. the Ethernet bandwidth is set on base on multiple of 32K.The outer design use the standard 19 inches ra…

Product Description: 16E1 fiber optical multiplexer is the 16E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 16E1. The outer design use the standard 19 inches rack, so the volume is little, weight is light and operation is convenient and cr…

Description: The 8E1 fiber optical multiplexer is the 8E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 8E1 and 4*100M wire speed Ethernet data. the Ethernet bandwidth is set on base on multiple of 32K.. The outer design use the standard 19 …

Description: 4E1 fiber optical multiplexer is the 4E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 4E1. The outer design use the standard 19 inches rack, so the volume is little, weight is light and operation is convenient and credit. 4E1 f…

Description The BD-LAN3000 is multiservice fiber optical multiplexer with SNMP&LCD&Console management. It is created with 16E1+4*100M full speed Ethernet capacity of transmission interfaces. The fiber multiplexer can provide various interface modules for voice, data and video services in cities and industrial districts. Its optional interfaces suppor…

32 E1 fiber optic multiplexer realizes fiber to 32 E1 and 4GE multiplexer point-to-point optical transmission. The PDH Fiber Multiplexer device  provides 1-32*E1 interface, 1-4*10/100/1000M Ethernet interface (Wire Speed 1000M) and 2 expansion interfaces. 4* Ethernet interface is switch interface, can support VLAN. 1 expansion interface can be used as the tr…

Description: 16E1 fiber optical multiplexer can multiplex to 16E1 signals for transmission over an optical fiber, resulting in reaching a longer distance without a repeaters and superior performance compared to copper media.   16E1 fiber optical multiplexer is the 16E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to…

Description: 8E1 fiber optical multiplexer is the 8E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 8E1. The outer design use the standard 19 inches rack, so the volume is little, weight is light and operation is convenient and credit. 8E1 f…

Product Description: 4E1 fiber optical multiplexer is the 4E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 4E1. The outer design use the standard 19 inches rack, so the volume is little, weight is light and operation is convenient and credi…