E1 معدد إرسال الألياف الضوئية

يدعم جهاز الإرسال المتعدد 16E1 pdh إدارة SNMP، وتكرار مصدر الطاقة المزدوج 48VDC ووحدة IU مقاس 19 بوصة مثبتة على الرف. يحتوي جهاز الإرسال المتعدد البصري 16E1 4GE pdh على الواجهات التالية؛ 16x E1 G.703؛ ثلاثة منافذ إيثرنت كهربائية مدمجة (10/100/1000) ميجابت في الثانية؛ منفذ إيثرنت للألياف الضوئية (مقبس SFP) 1000 ميجابت في الثانية.

16 E1 fiber optical multiplexer can multiplex to 16×1 multiplexer and 8 Ethernet signals for transmission over an optical fiber, resulting in reaching a longer distance without a repeaters and superior performance compared to copper media.

يوفر جهاز الإرسال المتعدد عبر الألياف الضوئية E1 نقل E1 والإيثرنت عبر الألياف، وإدارة واجهة المستخدم الرسومية، وإمداد الطاقة المزدوج

Functions: ● Modularized Fiber Optical Multiplexer of 16*E1 (2.048Mb/s) channels, 2* 100Mbps Ethernet channel and a clear asynchronous RS-232 data channel ● 1+1 Optical Redundancy Backup: Provide two plug-in I/O slotsfor dual optical interface cards.Protection of dual optical interfaceavailable to ensure that business will not be interrupted. ● Flexible Configuration: Providing 4 plug-in I/O slotswhich…

Ethernet PDH Fiber Multiplexer BD-OP-8E1-4GE is the 8E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 8E1 and 4*10/100*1000M Ethernet data. The outer design use the standard 19 inches rack, so the volume is small, weight is…

Overview The 16E1 optical fiber multiplexer is 16E1 point-to-point optical transmission equipement with LCD management, The 16E1 optical fiber multiplexer transmission capacity is 16E1, 4*100M Ethernet and 2channel RS232/RS485/RS422 data. LCD management, console management, uses the FPGA chips and easy to upgrade. It is single board structure and its largest transmission capacity is 16E1, 4*100M…

Ø Provides 16 E1 transparent transmission ;

Product Description: 16 E1 fiber optical multiplexer is the 16E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 16E1. The outer design use the standard 19 inches rack, so the volume is little, weight is light and…

Description: The 8E1 fiber optical multiplexer is the 8E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 8E1 and 4*100M wire speed Ethernet data. the Ethernet bandwidth is set on base on multiple of 32K.. The outer…

4 E1 fiber optical multiplexer is the 4E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 4E1. The outer design use the standard 19 inches rack, so the volume is little, weight is light and operation is…

Ø Rate: 10/100M, full/duplex auto-negotiation

Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber,attenuation (3dbm/km)

16 E1 Fiber Optical Multiplexer with 4*ethernet

256 Phone over fiber Optical Multiplexer

4E1 fiber optical multiplexer is the 4E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 4E1. The outer design use the standard 19 inches rack, so the volume is little, weight is light and operation is convenient…