8*E1+4*10/100/1000 Gigabit Ethernet PDH Fiber Multiplexer

Description

OVERVIEW:

Ethernet PDH Fiber Multiplexer BD-OP-8E1-4GE is the 8E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 8E1 and 4*10/100*1000M Ethernet data. The outer design use the standard 19 inches rack, so the volume is small, weight is light and operation is convenient and credit.

Feature:

•  Provides 8 E1 transparent transmission ;
•  Provide 1~4 channel 10/100*1000M Ethernet ,4 Ethernet support VLAN isolation for option
•        The rate of optical port is 1.25G, transmission
•        E1 interface code is HDB3，E1 vibration characteristic conforms to ITU-T G.703、G.823 and G.742;
•        Ethernet port supports full/half duplex, 10M/100/1000M auto-ataptable;
•        Has complete alarm function for device status;
•        Supports E1 loop from remote so as to detect and manage device conveniently;
•        he combination AC220V and DC-48V for redundant for option

Ethernet PDH Fiber Multiplexer Specification:

1.25G Optical interface     
Optical wavelength: 850nm/1310nm for multi-mode optical interface,
1310nm/1550nm for single-mode optical interface
Optical interface: SC/FC
Receiving and dispatching module: >-6dBm
Optical receiver receiving sensitivity: <-36dBm
Dynamic range receiving: >-30dB
Transmitting range: Multi-mode 2 Km, single-mode 40Km, single-mode 60 Km, single-mode 120Km
Vibration characteristic: Satisfies G.742 and the G.823 standard

E1 interface    
Interface code: HDB3 code
Line speed: 2.048Mbp/S ą50ppm
Interface standard: ITU-T G 703
Interface impedance: 75ohm/unbalanced or 120ohm/ balanced

Gigabit Ethernet Interface:

Interface rate:10/100/1000Mbps

Port number:4 UTP

Interface characteristic: IEEE802.3, IEEE802.1Q
Connector: RJ45 

Related Article: Management Console and Management GUI in PDH Fiber Multiplexer and E1 Protocol Converter