RS232/V35/E1 以太网转换器系列

概述：8E1转以太网转换器（也称8E1以太网转换器）采用反向复用技术，将多个E1通道绑定在一起，传输10/100BaseT数据，实现1-8个E1通道与以太网接口之间的转换。它可以将信号从E1通道点对点传输到RJ45接口，实现E1通道与以太网接口之间的连接。

Product function: 4E1 to 10/100BT ethernet converter used back multiplexing technology, transfer 10M/100M Ethernet data by using multi E1 channels. Realize convert between 1 to 4 E1 channels and Ethernet interface. It can transmit signal of E1 channel to RJ45 interface point to point, realize the connection of E1 channel and Ethernet. It different from norma…

Description BD-FE1-4ETH-M E1 to 4*100BASE-TX ethernet Protocol converter is high performance Ethernet bridge, which accomplishes the 4*100M Ethernet over E1 transmission. As an extended device of the Ethernet, the E1 to BaseT Ethernet converter realizes interconnection of four Ethernet by using the E1 channel provided by existing networks with low cost. 10/1…

Product introduction: E1-2/4V35 E1 to 4V35 Converter provides physical conversion between ITU-T G.703 standard E1 interface and 2/4 standard V.35 interfaces as well as one RS232 data channel. It can provide safe and seamless communication connection between equipments with different interfaces in the network. Random time slot can be chosen in G.703 standard …

描述：BD-ETH-V.35 10/100Base-T 以太网转 v.35 转换器提供从 V.35 到以太网的转换，是一款性能卓越、自学型长距离以太网桥。它体积小巧、成本低廉，非常适合需要低成本设备的连接应用。它也可用作 LAN 的扩展器。以太网转 v.35 转换器 Fe…

Features: ●  G.703 E1 to RS232 converter support 0~115200 Kbps self-adapt; ●   Support RS232 interface (TXD,RXD,GND) ●   RS232 support hot-plug, connection to DTE or TCE device; ●   offer 2 kinds of loop-return function, namely E1 self-looping at local end (ANA) and RS232 self-looping at local end (REM) ●   AC220V and DC-48V for option, and DC-48V is  not di…

概述 成套 E1 到 V35 转换器提供 ITU-T G.703 标准 E1 接口和 V.35 端口之间的转换。V.35 转换器实现 V.35 到 E1 的转换，并提供不同接口的不同设备之间通信的安全无缝连接。它可以随机使用 G.703 E1 中的时隙组成 N*64K（N=1-32）V35 通道，…

Product introduction: E1 to V.35/V.24 converter provides physical level conversion between ITU-T G.703 standard E1 interface and standard V.35 interface, it can receive synchronous 2.048 Mbps data from E1channal and transmit the data to router, DDN, multiplexer or other equipment, thus providing secure and seamless communicating connection between equipments…

GENERAL INFORMATION: BD-FE1-ETH is a single port E1/ framed E1 with Ethernet Bridge that provides high-speed LAN-to-WAN connectivity. Plugging directly into the 10/100Base-T port of a hub or LAN switch, the Framed E1 to ethernet converter provides Framed E1 access at connection data rates of 2.048 Mbps, or nx64 (n=1 to 32 channels). The FE1-ETH E1 over Ether…

Overview: BD-E1-ETH is a single port G.703 E1 to Ethernet converter (also called Ethernet over E1 TDM converter,G703 to ethernet converter) that provides high-speed LAN-to-WAN connectivity. Plugging directly into the 10/100Base-T port of a hub or LAN switch, the BD-E1-ETH provides E1 access at connection data rates of 2.048 Mbps. The ethernet over E1 convert…

BaseT Ethernet converter Description BD-FE1-4ETH-MM is Fast Ethernet over 1 or 2-port E1 protocol converter. Ethernet traffic over E1 lines is transferred to the packet-switched network via the unit’s Fast Ethernet ports. The encapsulation method supports HDLC/PPP-BCP (RFC3518)/GFP-F. Typical Applications The device can be used in a point-to-point applicatio…

The 4E1-4FE interface converter is based on FPGA, using reverse direction multiplexing technology to bundle for multiple E1 circuits to transmit the Ethernet data of 4-channel 100BASE-TX. It can realize 1~4 E1 channel to convert between Ethernet optical interface. This device can transmit the transceiver signal point to point to Ethernet optical interface to…