Framed E1 to Ethernet Converter

●   Have two row of LED , one indicate local status, the other indicate remote status

●   Remote adjustment of velocity for the remote device is available, you can set the velocity of one side,  and the velocity of the other side can auto adjust.

●   Provide two RJ45 for LAN, one is MDI interface, the other is MDIX.

●   the interface of LAN is 10/100M ,full/duplex auto-negotiation

●   LAN interface support 802.1Q(VLAN) protocol

●   Provide LAN auto reset function, run more stably

●   Provide two clock mode, E1 main clk and E1 line clk

●   E1 port support BNC 75ohm dual coax and RJ45 120ohm twisted-pair G.703 connections provided, support 75ohm/120ohm adaptively;

●   One console port for selection on your order

●   it can realize SNMP function in our chassis installation

E1 to Ethernet converter Video:

E1 Interface 

Line Rate: 2.048Mbps?50ppm
Line Code : HDB3
Interface Standard: ITU-T G.703,G.704
E1 Impedance : 75ohm(unbalance) and 120ohm(balance) adapt
Connections : dual coax and 120ohm twisted-pair (RJ45)
Jitter tolerance : comply standard G.742 and G.823
Ethernet Interface
RATE : 10/100M ,full/duplex auto-negotiation
PROTOCOL: Support IEEE 802.3,IEEE 802.1Q(VLAN)
MAC Adderess Entiries:4096 Entiries
Totol Memory Sizes:64MBits SDRAM
Connection: RJ45

ENVIRONMENT
    working temperature: 0C- 50C
relative humidity: 95%(without coagulation)
No causticity and impregnant gas, no rising dust, no strong magnetic field disturbing

Power
    With good insulation, stable working status is available
power: -48V type, input voltage: -36V~-72V
power: 220V type, input voltage: 165V~265V
power consume:<5W

DIMENSIONS
Mini Type:210mm(W) × 140mm (L) x 30mm(H)