Framed E1 to 4 10/100 BaseT Ethernet converter with enhanced management

Description

BaseT Ethernet converter Description

BD-FE1-4ETH-MM is Fast Ethernet over 1 or 2-port E1 protocol converter. Ethernet traffic over E1 lines is transferred to the packet-switched network via the unit’s Fast Ethernet ports. The encapsulation method supports HDLC/PPP-BCP (RFC3518)/GFP-F.

Typical Applications

The device can be used in a point-to-point application or in a hub-and-spoke topology, operating opposite Grancom’s CS1200 series, MRS46xx series and third-party gateways.

Typical applications include:

l  Ethernet private Line/LAN services

l  IP DSLAM, cellular IP, and WiMAX base station backhauling

l  Interoffice or enterprise LAN connection.

Features:

•  Built-in intelligent switch fabric and provide 4-port fast Ethernet
•  Support 2047 bytes frames
•  Up to 2K MAC address entries
•  Support IEEE802.1Q VLAN and QinQ double tagging
•  Support HDLC/PPP-BCP(RFC3518)/GFP-F encapsulation
•  Support E1 frame or un-frame application
•  Provide statistics for each E1 channel
•  Configure via CLI/Web/SNMP(v1/v2c)
•  Support software and firmware upgrade

E1 Interface

Ø  Line Rate:

framing: N*64Kbps，N=0~31; unframing: 2.048Mbps

Ø  Line Code : HDB3

Ø  Interface Standard: ITU-T G.703

Ø  E1 Impedance: 75Ω(unbalance) BNC connector and 120Ω(balance) RJ45 connector

Ø  Jitter tolerance : comply with G.823,  Output jitter < 0.05UI

Ethernet Interface

l  Number of Ports: 4

l  Type: 10/100 Mbps, auto-negotiation, full/half duplex, flow control, MDI/MDX crossover

l  Compliance: Relevant sections of IEEE 802.3

l  Max Frame Size : 2047 bytes

l  Connector and Electrical Cable Type: RJ-45 , Cat.5

l  Line Protection:

Built-in 1.5 KV Magnetic Isolation Protection

6KV/42Ω surge protection

Encapsulation Protocols

l  HDLC (compatible with RAD or RAISECOM’s products)

l  GFP-F(ITU-T G.8040, G.7041/Y.1303)

l  VCAT (ITU-T G.7043)

l  LCAS (ITU-T G.7042)

l  PPP/BCP(RFC 3518)

Internal Bridge

l  Number of VLANs : Up to 16

l  Compliance: Relevant sections of 802.1Q and QinQ double tagging

l  LAN Table:  Up to 2K MAC addresses (learned)

Management Ports

l  Console Port

Interface standard: RS-232

Connector: RJ-45

Data rate: 115.2 kbps

Power supply  

working voltage range wide, good

anti-disturb and Isolation, work stable

option I – DC-48V,range DC-36V~DC-72C   

option II – AC220V,range AC165V~AC240V

Power Consumption:    <=5 Watts

Environment conditionBaseT Ethernet converter

Operating temperature:  0C~+50 C

Storage temperature:   -20 C~+70 C

Relative temperature:95% (uncondensed)

Dimension                  

2 210mm(L)

2 140mm(W)

2  40mm(H)