10/100Base-T Ethernet to V.35 converter
Short Description:Decription: BD-ETH-V.35 provides conversion from V.35 to Ethernet, is a good performance, self-study…
BD-ETH-V.35 provides conversion from V.35 to Ethernet, is a good performance, self-study long-distance Ethernet bridge. It is of small volume and low cost and is very suitable for connection application which needs low cost equipment. It can be also used as an extender of LAN.
◆ completely compatible with IEEE 802.3/EthernetV.2;
◆ WAN circuit interface：V.35，rate auto-adaptable 0~100Mbps;
◆ circuit transmitting agreement：HDLC;
◆ rate of filter and transmitting reaches 15,000frame/s;
◆ 256 frame buffer ;
◆ 10,000 MAC address LAN table ;
◆ auto-study and update function ;
◆ supports DTC and DCE, external clock and internal clock;
Rate: 10/100M, full/duplex auto-negotiation
Protocol: Support IEEE 802.3,IEEE 802.1Q (VLAN)
MAC Address Entiries: 4096 Entiries
Total Memory Sizes: 64MBits SDRAM
Physical interface: RJ45, support AUTO-MDIX
Interface: compatible with V.35 standard.
Connector: M34 male socket
Connect mode: DCE/DTE
working voltage range wide, good
anti-disturb and Isolation, work stable
option I – DC-48V,range DC-36V~DC-72V
option II – AC220V,range AC165V~AC240V
Power Consumption: <=3 Watts
Operating temperature: 0C~+50 C
Storage temperature: -20 C~+70 C
Relative temperature:95% (uncondensed)
uestion: Are you using PPP as the encapsulation protocol for carrying Ethernet over V.35?
Answer: We do not use PPP encapsulation protocol for our ethernet V35 converter.
Qestions about the Ethernet to V.35 converter