1000M千兆以太网POE(PSE)光纤收发器

描述

概观

This advanced networking device seamlessly bridges 10/100/1000Base-TX copper networks with high-speed 1000Base-FX fiber optic connections, while simultaneously delivering robust Power over Ethernet (PoE) capabilities as a Power Sourcing Equipment (PSE). As a versatile Gigabit media converter, it solves distance and interference limitations of traditional copper cabling, allowing reliable data transmission up to an impressive 100 kilometers with single-mode fiber.

What sets this converter apart is its intelligent dual-function design. It not only converts electrical signals to optical signals but also provides IEEE802.3at/af compliant PoE power to remote devices like IP cameras, wireless access points, and VoIP phones over standard CAT5e/CAT6 cables. With built-in Link Fault Pass-through (LFP) technology, the device automatically monitors both fiber and copper connections, ensuring network reliability by disabling transmission on one port if it detects signal loss on the other. This industrial-grade media converter features a compact, rugged design suitable for challenging environments with operating temperatures from 0°C to 55°C and includes comprehensive protection features like auto-recovery short circuit and over-current protection.

PoE media converter fiber Features & Specifications

Core Conversion Technology

• Dual-Mode Conversion: Converts 10/100/1000Base-TX Ethernet to 1000Base-FX fiber optic (with forced 100Base-FX capability)
• High-Speed Performance: Supports 10Mbps, 100Mbps, and 1000Mbps data rates with 9K bytes packet handling at cut-through mode
• Fiber Flexibility: Compatible with both single-mode (up to 100km range) and multi-mode (up to 5km range) fiber optics
• Connector Options: Available with SC, FC, ST, LC, or BiDi connectors based on configuration requirements

Power over Ethernet (PSE) Capabilities

• Standards Compliance: Fully compliant with IEEE802.3af and IEEE802.3at PoE standards
• Power Delivery: Provides 48V power (or other voltages) to connected Powered Devices (PDs) via CAT5e/CAT6 UTP cable
• Intelligent Management: Built-in PSE controller with PD signature sensing and continuous power monitoring
• Pin Configuration: Delivers power on pins 4/5 (V+) and 7/8 (V-) following PoE standards

Network Reliability & Protection

• Link Fault Pass-through (LFP): Automatically monitors fiber and copper RX ports for signal loss and disables corresponding TX ports to maintain network integrity
• Comprehensive Protection: Features over-current protection with auto-recovery and short circuit protection with auto-recovery
• Stable Performance: Maintains signal integrity with minimal loss even over extended distances

1000Base-FX 光纤 PoE 媒体转换器 界面:

接头：SC、FC、ST可选

波长：1310nm、1550nm或850nm（可由客户选择）

光纤类别：

Ø 单模8.3/125、8.7/125、9/125、10/125um

Ø 多模50/125、62.5/125、100/140um

多模连接：传输范围最远可达5公里；

单模连接：传输范围可达100公里。

10/100/1000M 基站发射机：

连接器：UTP RJ45 连接器

数据速率：

10/100/1000Mbps

（IEEE802.3U IEEE802.3z 1000Base-Tx）

1000Mbps（1000Base-FX）或

100Mbps（100Base-FX）

以太网供电输出：

引脚分配和极性：4/5 (V+)、7/8 (V-)
输出功率：请参阅订购信息
效率：最低 75%
短路保护：自动恢复
过流保护：自动恢复

PoE 媒体转换器光学规格：

方面

2 95毫米（长）x70毫米（宽）x26毫米（高）

 环境条件

工作温度：0℃～+55℃

存储温度：-20℃~+70℃

相对温度：95%

PoE光纤收发器订购信息：