RS232/V35/E1 以太网转换器系列

Standard: E1 interface compatible with G.703 standard. Rate: 2.048Mbit/s?50ppm Coding: HDB3 Impedance: 75ohm ( unbalance) or 120ohm (balance) Connector: BNC (75ohm) or RJ45 (120ohm) Jitter: According to G.742 and G.823 rear panel with 120ohm

Product function: 4E1 to 10/100BT ethernet converter used back multiplexing technology, transfer 10M/100M Ethernet data by using multi E1 channels. Realize convert between 1 to 4 E1 channels and Ethernet interface. It can transmit signal of E1 channel to RJ45 interface point to point, realize the connection of E1 channel and Ethernet. It different from…

BD-FE1-4ETH-M E1 to 4*100BASE-TX ethernet Protocol converter is high performance Ethernet bridge, which accomplishes the 4*100M Ethernet over E1 transmission. As an extended device of the Ethernet, the E1 to BaseT Ethernet converter realizes interconnection of four Ethernet by using the E1 channel provided by existing networks with low cost.

Product introduction: E1-2/4V35 E1 to 4V35 Converter provides physical conversion between ITU-T G.703 standard E1 interface and 2/4 standard V.35 interfaces as well as one RS232 data channel. It can provide safe and seamless communication connection between equipments with different interfaces in the network. Random time slot can be chosen in G.703 standard E1 to…

BD-ETH-V.35 10/100Base-T Ethernet to v.35 converter provides conversion from V.35 to Ethernet, is a good performance, self-study long-distance Ethernet bridge. It is of small volume and low cost and is very suitable for connection application which needs low cost equipment. It can be also used as an extender of LAN.

Features: ● G.703 E1 to RS232 converter support 0~115200 Kbps self-adapt; ● Support RS232 interface (TXD,RXD,GND) ● RS232 support hot-plug, connection to DTE or TCE device; ● offer 2 kinds of loop-return function, namely E1 self-looping at local end (ANA) and RS232 self-looping at local end (REM) ● AC220V and DC-48V for option, and DC-48V…

Overview The framed E1 to V35 converter provides conversion between ITU-T G.703 standard E1 interface and V.35 port.The V.35 converter realize V.35 over E1 conversion and provides safely seamless connection of communication between different devices with different interfaces. It can random use timeslot from G.703 E1 to compose N*64K (N=1-32) V35 channel, suitable for device…

E1 interface: Interface standard: Conforms to G.703 standard Interface rate: 2.048Mbit/S?50ppm Vibration characteristic: Satisfies G.742 and G.823 standard Transmission capacity: 1*E1 Clock type: internal-clock, route clock Connector: BNC (75 ohm), RJ45 (120 ohm) Interface impedance: 75ohm (unbalanced), 120ohm (balanced)

GENERAL INFORMATION: BD-FE1-ETH is a single port E1/ framed E1 with Ethernet Bridge that provides high-speed LAN-to-WAN connectivity. Plugging directly into the 10/100Base-T port of a hub or LAN switch, the Framed E1 to ethernet converter provides Framed E1 access at connection data rates of 2.048 Mbps, or nx64 (n=1 to 32 channels). The FE1-ETH…

Overview: BD-E1-ETH is a single port G.703 E1 to Ethernet converter (also called Ethernet over E1 TDM converter,G703 to ethernet converter) that provides high-speed LAN-to-WAN connectivity. Plugging directly into the 10/100Base-T port of a hub or LAN switch, the BD-E1-ETH provides E1 access at connection data rates of 2.048 Mbps. The ethernet over E1 converter…

BD-FE1-4ETH-MM is Fast Ethernet over 1 or 2-port E1 protocol converter. Ethernet traffic over E1 lines is transferred to the packet-switched network via the unit’s Fast Ethernet ports. The encapsulation method supports HDLC/PPP-BCP (RFC3518)/GFP-F.

The 4E1-4FE interface converter is based on FPGA, using reverse direction multiplexing technology to bundle for multiple E1 circuits to transmit the Ethernet data of 4-channel 100BASE-TX. It can realize 1~4 E1 channel to convert between Ethernet optical interface. This device can transmit the transceiver signal point to point to Ethernet optical interface to make…