10Gbps Copper SFP RJ45 transceiver module
Short Description:
10Gbps Copper SFP is designed for high-speed Ethernet connectivity, offering up to 10 Gbps bi-directional data transmission over RJ45 copper cabling for distances up to 30 meters. Built to support the latest IEEE 802.3 10GBASE-T and 1000BASE-T standards, this transceiver ensures seamless integration into data centers, enterprise switches, and network servers…Description
Specification
Application
Order
Downloads/FAQ
Product Tags
Reviews
Description
10Gbps Copper SFP is designed for high-speed Ethernet connectivity, offering up to 10 Gbps bi-directional data transmission over RJ45 copper cabling for distances up to 30 meters. Built to support the latest IEEE 802.3 10GBASE-T and 1000BASE-T standards, this transceiver ensures seamless integration into data centers, enterprise switches, and network servers.
Its compact RJ-45 connector, hot-pluggable SFP+ form factor, and fully metallic housing provide reliable EMI shielding and reduced power dissipation, ensuring stable performance even under demanding conditions. With a wide operating temperature range (0℃ to 70℃) and RoHS compliance, this 10Gbps Copper SFP is the ideal solution for users seeking flexible 10G copper connectivity in a compact, cost-effective package.
10Gbps Copper SFP Feature
- Supports up to 10Gbps bi-directional data transmission for high-speed networking
- Compatible with 10GBASE-T and 1000BASE-T standards (IEEE 802.3)
- Enables RJ45 copper connectivity up to 30 meters using Cat6a/Cat7 cables
- Hot-pluggable SFP+ form factor for easy deployment and maintenance
- Fully metallic enclosure reduces EMI and enhances signal stability
- Compact RJ45 connector design for high-density applications
- Low power dissipation for energy-efficient operation
- Supports I2C interface for PHY access and monitoring
- Operates within 0°C to 70°C extended temperature range
- RoHS compliant and lead-free, environmentally friendly
Regulatory Compliance
The transceivers are Class 1 Laser Products comply with FDA regulations. Meet Class 1 eye safety requirements of EN 60825 and the electrical safety requirements of EN 60950.
10GBASE-T copper SFP Low-Speed Signals
| Parameter | Symbol | Min. | Max | Units | Notes/Conditions |
| SFP Output LOW | VOL | 0 | 0.5 | V | 4.7k to 10k pull-up to host Vcc,measured at host side of connector |
| SFP Output HIGH | VOH | Host Vcc-0.5 | Host Vcc+0.3 | V | 4.7k to 10k pull-up to host Vcc,measured at host side of connector |
| SFP Input LOW | VIL | 0 | 0.8 | V | 4.7k to 10k pull-up to Vcc,measured at SFP side of connector |
| SFP Input HIGH | VIH | 2 | Vcc+0.3 | V | 4.7k to 10k pull-up to Vcc,measured at SFP side of connector |
Table 2. Low-speed signals, electronic characteristics
High-Speed Electrical Interface
ALL high-speed signals are AC-coupled internally
(1)High-speed Electrical Interface Transmission Line-SFP
| Parameter | Symbol | Min. | Typ | Max | Units | Notes/Conditions |
| Line Frequency | fL | 10 | 125 | 1000 | MHZ | 5-level encoding,per IEEE 802.3 |
| Tx Output Impedance | Zout,TX | 100 | Ohm | Differential,for all frequencies between 1MHz and 125MHz | ||
| Rx Input Impedance | Zin,RX | 100 | Ohm | Differential,for all frequencies between 1MHz and 125MHz |
Table 3. High-speed electrical interface,transmission line-SFP
(2)High-speed Electrical Interface,Host-SFP
| Parameter | Symbol | Min. | Typ | Max | Units | Notes/Conditions |
| Single ended data input swing | Vinsing | 180 | 700 | mV | Single ended | |
| Single ended data output swing | Voutsing | 350 | 850 | mV | Single ended | |
| Rise/Fall Time | Tr,Tf | 175 | psec | 20%-80% | ||
| Tx Input Impedance
|
Zin | 50 | Ohm | Single ended | ||
| Rx Output Impedance | Zout | 50 | Ohm | Single ended |
Table 4. High-speed electrical interface,host-SFP
Specification
10GBASE-T copper SFP Specifications
| Parameter | Symbol | Min. | Typ | Max | Units | Notes/Conditions |
| Data Rate | BR | 10 | 10000 | Mb/sec | IEEE 802.3 compatible.See Notes 2 through 4 below | |
| Tx Output Impedance | L | 100 | m | Category 5 UTP.BER<10-12 |
Table 5. General specifications
Note:
1.Clock tolerance is +/- 50 ppm
2.By default,the CLBD-10GLC-T is a full duplex device in preferred master mode
3.Automatic crossover detection is enabled. External crossover cable is not required
4.Multi-BASE-T operation requires the host system to have an SGMII interface with no clocks, and the module PHY to be configured per Applications Note AN-2036.With a SERDES that does not support SGMII,the module will operate at single rate only.
Environmental Specifications
The BD-10GLC-T has an extended range from 0℃ to +70℃ case temperature as specified in Table.
| Parameter | Symbol | Min. | Typ | Max | Units | Notes/Conditions |
| Operating Temperature | Top | 0 | 70 | Case temperature | ||
| Storage Temperature | Tsto | 0 | 70 | Ambient temperature |
Table 6. Environmental specifications
Pin Descriptions
| Pin | Symbol | Description | Ref. |
| 1 | VEET | Transmitter Ground (Common with Receiver Ground) | 8.1 |
| 2 | TFAULT | Transmitter Fault. Not supported. | |
| 3 | TDIS | Transmitter Disable. Laser output disabled on high or open. | 8.2 |
| 4 | MOD_DEF(2) | Module Definition 2. Data line for Serial ID. | 8.3 |
| 5 | MOD_DEF(1) | Module Definition 1. Clock line for Serial ID. | 8.3 |
| 6 | MOD_DEF(0) | Module Definition 0. Grounded within the module. | 8.3 |
| 7 | Rate Select | No connection required | |
| 8 | LOS | Grounded | 8.4 |
| 9 | VEER | Receiver Ground (Common with Transmitter Ground) | 8.1 |
| 10 | VEER | Receiver Ground (Common with Transmitter Ground) | 8.1 |
| 11 | VEER | Receiver Ground (Common with Transmitter Ground) | 8.1 |
| 12 | RD- | Receiver Inverted DATA out. AC Coupled. | |
| 13 | RD+ | Receiver Non-inverted DATA out. AC Coupled. | |
| 14 | VEER | Receiver Ground (Common with Transmitter Ground) | 8.1 |
| 15 | VCCR | Receiver Power Supply | |
| 16 | VCCT | Transmitter Power Supply | |
| 17 | VEET | Transmitter Ground (Common with Receiver Ground) | 8.1 |
| 18 | TD+ | Transmitter Non-Inverted DATA in. AC Coupled. | |
| 19 | TD- | Transmitter Inverted DATA in. AC Coupled. | |
| 20 | VEET | Transmitter Ground (Common with Receiver Ground) | 8.1 |
Table 7. SFP to host connector pin assignments and descriptions
Notes:
- Circuit ground is connected to chassis ground.
- PHY disabled on TDIS>2.0V or open,enabled on TDIS<0.8V.
- Should be pulled up with 4.7k – 10k Ohms on host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls line low to indicate module is plugged in.
Serial Communication Protocol
BD-10GLC-T supports the 2-wire serial communication protocol outlined in the SFP MSA.
The physical layer IC can also be accessed via the 2-wire serial bus at address Ach.
| Parameter | Symbol | Min. | Typ | Max | Units | Notes/Conditions |
| IC Clock Rate | 0 | 100000 | Hz |
Ordering Information
| Part No. | Data Rate | Laser | Fiber Type | Distance | Optical Interface |
| BD-10GLC-T | 10G | N/A | N/A | 20m | RJ45 |
Application
10 Gigabit Ethernet
Order
| Product Model | Descriptions | Inquiry |
|---|---|---|
| BD-10GLC-T | 10G 30m RJ45 | Request Price |
Downloads/FAQ
Product Tags
Reviews
0 reviews
5
