30POTS (FXO/FXS) over Ethernet Converter - Baudcom

30POTS (FXO/FXS) over Ethernet Converter

30POTS (FXO/FXS) over Ethernet Converter

Short Description:

 Overview The converter encapsulates the voice data in the IP packet, supports the UDP packet mode, realizes the 1-30 voice service to the 100M Ethernet conversion, in the same network segment or through the router to achieve different network segment communication. Features High transmit efficiency, low transmit delay. Provide Console(CLI)/WEB management in…
  • Payment Terms: Paypal,western union,L/C,D/A,D/P,T/T

  • Description

    Specification

    Application

    Order information

    Q&A

    Product Tags

    Reviews

    Description

     Overview

    The converter encapsulates the voice data in the IP packet, supports the UDP packet mode, realizes the 1-30 voice service to the 100M Ethernet conversion, in the same network segment or through the router to achieve different network segment communication.

    Features

    • High transmit efficiency, low transmit delay.
    • Provide Console(CLI)/WEB management interface, easy to install and open;
    • Voice port to support FXO/FXS/2-4 Wire E&M / 2-4 wire Audio/Magnet phone interface, FXO port plug into PBX, FXS port is connected to the user’s telephone;
    • Voice FXO / FXS interface, support for caller ID / reverse polarity billing / fax function;
    • Both sides of the device support FXO+FXS hybrid access;
    • Ethernet interface rate of 10M / 100M, full duplex / half duplex adaptive;
    • Support power failure or automatic network recovery;
    • Support Ethernet packet out-of-order recovery and cache to anti-network delay;
    • Adjustable frame length to balance bandwidth and transmission delay;
    • Based on hardware design, start fast;
    • DC-48V / DC24V power supply with polarity automatic detection function;installation does not need to distinguish between positive and negative;

    Parameters

    • Ethernet interface(10/100M)
    Interface rate 10/100 Mbps, half/full duplex auto-negotiation
    Interface Standard Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
    MAC Address Capability 4096
    Connector RJ45, support Auto-MDIX
    • FXS Phone Interface
    Ring voltage 75V
    Ring frequency 25HZ
    Two-line Impedance 600 Ohm (pick up)
    Return loss 40 dB
    • FXO Switch Interface
    Ring detect voltage 35V
    Ring detection frequency 17HZ-60HZ
    Two-line Impedance 600 Ohm (pick up)
    Return loss 40 dB
    • EM 2/4 Line
    AD 0dB
    DA 0dB
    Two/Four-line Impedance 600 Ohm
    Return loss 20 dB
    • Working environment
    Working temperature -10°C ~ 50°C
    Working Humidity 5%~95 % (no condensation)
    Storage temperature -40°C ~ 80°C
    Storage Humidity 5%~95 % (no condensation)

    Specifications

    Model BD-IP-MUX30
    Functional Description 30*Voice over Ethernet ,Internal power AC220V/DC48V/DC24V can be optional
    Power Power supply: AC180V ~ 260V;DC –48V;DC +24V

    Power consumption: ≤20W

    Dimension Product Size:   19inch  485mmx200mmx45mm(WxDxH)
    Weight 2.4KG

     

    Specification
    Application

    Order information
    Q&A
    Product Tags
    Reviews

    0 reviews

    5

    5 start 5 0
    4 start 4 0
    3 start 3 0
    2 start 2 0
    1 start 1 0

    Captcha

    The maximum file allowed is 20 MB MB. You can upload images and videos. Drop files here

    Leave Your Message