16 E1 over Ethernet Converter, Psuedo Wire TDM over IP - Baudcom

16 E1 over Ethernet Converter Pseudowire TDM over IP-Point to Multi-point Equipement

16 E1 over Ethernet Converter Pseudowire TDM over IP-Point to Multi-point Equipement

Short Description:

16 E1 over ethernet converter is used to transmit voice pseudowire TDM over IP network, point to point and point to multi-point application.
  • Payment Terms: Paypal,western union,L/C,D/A,D/P,T/T

  • Description



    Order information


    Product Tags



    16 E1 over ethernet converter is mainly used to transmit voice signal pseudowire TDM over IP network. It has 8*E1 interface, 2 UTP Ethernet port and 1*fiber Ethernet port. The E1 TDMoIP device can connect TDM device and user’s low cost wireless or lineate Ethernet/IP device, without affecting the voice quantity. It assures connecting to physical E1 interface of any device seamlessly, such as PBX, mobile base station, SS7 signaling device and voice mail system. It can be used in the communication system based on E1, such as LAN, WAN, MAN and wireless network. Providing emulation E1 channel through Ethernet, the difficulty is rebuilding timing information of E1 code stream effectively at the exit of network. The E1  special disadvantages of Ethernet itself, such as random packet delay, without effective timing transmit mechanism, transmission error or collision that brings on packet lose, must be conquered. Baudcom resolves the disadvantages of Ethernet itself, such as random packet delay, without effective timing transmit mechanism, transmission error or collision that brings on packet lose, through availing ourselves of technical advantage and adapting advanced clock disposal technology. The TDMoIP equipement use psuedo wire tdm over ip technology encapsulates the data of E1 stream to the packet and transmits it to the remote device through Ethernet.

    The 16E1 over ethernet converter can support point to point application (two 16E1 device work together) or point to multi-point application (the 16E1 device in the central site work with 1E1/2E1/4E1 TDM over IP in remote sites).

    TDMoIP Features

    • Provide 1-16E1 channels interface transparently, confirming to ITU-G.703.
    • High transmit efficiency, low transmit delay.
    • Provide 16 E1 channels and 2*10/100/1000Base-TX and 1*1000Base-X interface.
    • The length of Ethernet packet can be set, supporting huge packet.
    • User can select IP protocol encapsulation or simplicity Ethernet type.
    • Support VLAN setting.
    • Support Ethernet ping function.
    • Support package loss indicator function for E1 transmission line.
    • Local and remote E1 loop and local E1 enable function.
    • Point to point or point to multi-points connections, satisfying different applications.
    • High efficiency transmission, up to 90% bandwidth utility ratio.
    • Support two type interfaces-75Ω and 120Ω-unneed setting.
    • 10/100/1000M Ethernet, full/half duplex auto-adapt, support auto-MDIX.
    • When selecting network adaptation clock, it can resume the original clock accurately through TDM clock resumption mechanism, stable clock, little jitter and small excursion, conforming to ITU-T clock jitter and excursion standard.
    • The device support WEB management platform, online software upgrades, the host side can manage the work of each state machine equipment;

    Related Link:
    What is the difference between TDM over IP and E1 to Ethernet converter ?


    Ethernet interface(10/100/1000M)

    • Interface rate: 10/100/1000 Mbps, half/full duplex auto-negotiation
    • Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
    • MAC Address Capability: 4096
    • Connector: RJ45, support Auto-MDIX

    E1 Interface

    • Standard:      conform to G.703 standard
    • Code rate:     2.048Mbit/s±50ppm
    • Code type:     HDB3
    • Impendence: 75Ω(unbalance)/ 120(balance)
    • Connector: BNC(unbalance)/ RJ45(balance)
    • Jitter tolerance:  conform to G.742 and G.823

    Working environment

    • Working temperature: -10°C ~ 50°C
    • Working Humidity: 5%~95 % (no condensation)
    • Storage temperature: -40°C ~ 80°C
    • Storage Humidity: 5%~95 % (no condensation)
    Model BD-16E1-IP-CON
    Functional Description 16 E1 over Ethernet, pseudo wire tdm over ip
    Power Power supply: AC180V ~ 260V;DC –48V;DC +24V
    Power consumption: ≤10W
    Dimension 485X135X44.5mm(WXDXH)
    Weight 2.3KG

    point to point application

    16E1 ove ethernet point to point application

    convergency point to multi-point application

    16 E1 ove ethernet tdm over ip point to point application

    Order information
    Product Model Descriptions Inquiry
    BD-16E1-IP-CON 16E1, 75ohm or 120ohm, 3*ethernet and 1*optical (SFP slot) uplink, power supply AC 220V or DC 48V Request Price
    Product Tags

    0 reviews


    5 start 5 0
    4 start 4 0
    3 start 3 0
    2 start 2 0
    1 start 1 0


    The maximum file allowed is 20 MB MB. You can upload images and videos. Drop files here

    Related Products

    E1 TDMoIP – E1/T1 over ethernet convert...

    E1 TDMoIP is new generation TDM over IP equipment ... Read More

    16 FXO FXS POTS over Ethernet IP converter

    POTs over ethernet, 16channel FXS/FXO, 2*100M elec... Read More

    360 POTS Phone over Fiber multiplexer

    Overview 360 POTS (FXO/FXS) over Fiber multiplexer... Read More

    30 Voice (POTS/FXS/FXO) over E1 Converter | 3...

    Function 30 voice (anolag phone) over E1 provides ... Read More
    Leave Your Message