E1 over ethernet TDM over IP converter - Baudcom ...

E1 over ethernet TDM over IP converter

E1 over ethernet TDM over IP converter

Short Description:

Overview:      As a cost effective solution for the traditional telecom services migrate to the IP p…
  • Payment Terms: Paypal,western union,L/C,D/A,D/P,T/T

  • Description

    Specification

    Application

    Order information

    Q&A

    Product Tags

    Reviews

    Description

    Overview:

         As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, BD-E1-IP adopts the innovative TDM over IP technology, time division multiplexing, it transports the legacy E1/T1 data through the existing Ethernet or IP network.
        BD-E1-IP is the new generation of the TDM over IP equipment with IP circuit emulation that supports transportation of  E1/T1 over Ethernet or IP network. The uplink ports is  IEEE 802.3 compliant, 10/100BaseT auto-sensed Ethernet port.
       The Ethernet over E1 converter is a mini type device,which only half occupation of 19″ device. It is very convenient for customer to use it.
    The state-of-the-art design provides the highest availability with the accurate timing signal and data bit stream reconstruction. Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost.
    Telecom and Enterprise users can save a lot of access and equipment costs and generates new revenue by offering different types of service over existing Ethernet networks. It is also suitable for connecting to the wireless equipment to achieve fast deployment of E1/T1 services. One particular application is to build E1/T1 links with low cost Wireless LAN bridges, replacing much more costly microwave radios. Operators can use BD-E1-IP to provide legacy TDM services over wired or wireless packet network.
    Features
    1.    Support IETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP.
    2.     Support POE power unit embedded, support maximum 60W power over Ethernet.(optional)
    3.     User-friendly Web server supported for easy setup and maintenance
    4.     Point to point application and point to multipoint application are supported
    5.     E1/T1 Port supported, E1 or T1 easy selected by Web Manager
    6.     Uplink ports 1+1 backup supported
    7.     Stable E1/T1 clock recovery, low jitter and wander
    8.     Low processing delay for E1/T1 channels, high bandwidth usage efficiency
    9.     Resist to packet loss, with PCM frame synchronization protection
    10.     User definable encapsulation packet size for different application
    11.     Enough jitter buffer to resist packet delay variation (PDV)
    12.    Local Ethernet port throughput limiting, assuring E1/T1 QoS
    13.    Local and remote E1/T1 LOS and AIS and packet loss indication for trouble-shooting and maintenance
    14.    Support cascade concatenate for more than E1/T1 port
    15.    Support double power or single power supplier.
    Technical Specifications
    Item
    Description
    Model
    BD-E1-IP
    2 Uplink (1+1), E1/T1
    Interfaces
    Uplink
    Comply with IEEE 802.3
    E1/T1 Port
    E1 or T1 Ports Supported
    Comply with G.703
    Impedance: E1-120Ω/T1-100Ω or 75Ω
    Power
    Supply
    -48V DC or 220V (110V) AC or dual power supply
    +24VDC
    Consumption
    ≤10W
    Working Environment
    Temperature
    0~ 50°C
    Relative Humidity
    ≤90% (non-condensing)
    Dimension
    W x H x D (mm):
    220 x 35 x 150

     

    Specification
    Application

    Application1: Point to Point Application

    two units E1 TDM over IP work with voice device (PBX,PCM) and ethernet device (switch or router),transmitting voice and ethernet data over ethernet network.

    Application2: Point to Point Application

    E1 TDM over IP work with Voice over E1 converter,transmitting voice and ethernet data over ethernet network.

    Application3: Point to multipoint Application
                    16units E1 TDM over IP work with 16E1 TDM over IP or E1/4E1/8E1 TDM over IP work with 16E1 TDM over IP.

    Question1: Can Baudcom’s E1 TDM over IP support SATOP (RFC4553) protocol?
    Answer: Yes, our E1 TDM over IP can support SATOP (RFC4553) protocol.

    Question2: Can Baudcom’s E1 TDMoIP support CESoPSN (RFC5086) protocol?
    Answer: CESoPSN is for framed E1, our BD-E1-IP can not suuport the protocol. Our BD-FE1-IP TDM over IP device can support the framed E1 protocol.

    Question3: You have models T1 over Ethernet? I am currently using the brand’s devices orion telecom 2T1/E1 over Ethernet, but this device has no point to multipoint application.
    Answer: Our E1 TDM over IP (E1 over Ethernet) can support E1 or T1. Our device can support point to multi-point application. For example, one unit 16E1 device can work with 8 units 2E1 device.

    Question4: Can your E1 over Ethernet converter work in 110V AC?
    Answer: Our E1 TDM over IP device can support power supply AC 220V or AC 110V or DC 48V. We will provide you the device with AC 110V power supply.

    Question5: Can Baudcom provide 1*RJ45 to 2*BNC male cable 50cm?
    Answer: Yes, Baudcom can provide the cable, but need to pay attention to line sequence.

    Order information
    Product Model Descriptions Inquiry
    BD-E1-IP/AC E1 TDM over IP,E1 support 75ohm or 120ohm,10/100Mbps ethernet,web base management,power AC220V Request Price
    BD-E1-IP/DC E1 TDM over IP,E1 support 75ohm or 120ohm,10/100Mbps ethernet,web base management,power DC48V Request Price
    Q&A
    Product Tags
    Reviews

    0 reviews

    5

    5 start 5 0
    4 start 4 0
    3 start 3 0
    2 start 2 0
    1 start 1 0

    Captcha

    The maximum file allowed is 20 MB MB. You can upload images and videos. Drop files here

    Leave Your Message