WIFI XPON ONU 1GE 1FE and POTs
Short Description:
This WIFI XPON ONU is designed as a Home Gateway Unit (HGU) for carrier-class FTTH solutions, ensuring you get carrier-class performance without the premium price. The integrated 2.4G Wi-Fi eliminates the need for a separate router. You benefit from flexible configuration (Route/Bridge modes), robust firewall security, and remote management via TR069, making…Description
Specification
Application
Order
Downloads/FAQ
Product Tags
Reviews
Description
This WIFI XPON ONU is designed as a Home Gateway Unit (HGU) for carrier-class FTTH solutions, ensuring you get carrier-class performance without the premium price. The integrated 2.4G Wi-Fi eliminates the need for a separate router. You benefit from flexible configuration (Route/Bridge modes), robust firewall security, and remote management via TR069, making setup and daily use hassle-free.
With 1 Gigabit Ethernet port, 3 Fast Ethernet ports, wireless connectivity and POTS voice interface, 1Ge 1Fe WIFI XPON ONU provides a complete solution for internet, VoIP in one compact device. Built with reliable chipset architecture and optimized for long-term stability, this XPON ONU is a practical choice.

1GE WIFI XPON ONU Functional Feature
- Support EPON/GPON mode and switch mode automatically
- Support Route mode for PPPoE/DHCP/Static IP and Bridge mode
- Support IPv4 and IPv6 dual mode
- Support 2.4G WIFI and Multiple SSID
- Support SIP Proctol for Voip Service
- Support LAN IP and DHCP Server configuration
- Support Port Mapping and Loop-Detect
- Support Firewall function and ACL function
- Support IGMP Snooping/Proxy multicast feature
- Support TR069 remote configuration and maintenance
- Specialized design for system breakdown prevention to maintain stable system
Specification
Hardware Specification
| Technical item | Details |
| PON Interface | 1 GPON BOB (Bosa on Board) |
| Receiving sensitivity: ≤-28dBm | |
| Transmitting optical power: +1~+4dBm | |
| Transmission distance: 20KM | |
| Wavelength | TX: 1310nm, RX: 1490nm |
| Optical Interface | SC/UPC Connector |
| Design Scheme | RTL9603C+RTL8192FR+LE9643 BOB(RTL8290B) |
| Chip Spec | CPU 950MHz,DDR2 128MB |
| Flash | SPI NAND Flash 128MB |
| LAN Interface | 1 x 10/100/1000Mbps(GE) and 1 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
| Wireless | Compliant with IEEE802.11b/g/n, |
| Operating frequency: 2.400-2.4835GHz | |
| support MIMO, rate up to 300Mbps, | |
| 2T2R,2 external antenna 5dBi, | |
| Support: Multiple SSID | |
| Channel: Auto | |
| Modulation type: DSSS, CCK and OFDM | |
| Encoding scheme: BPSK, QPSK, 16QAM and 64QAM | |
| POTS interface | 1 FXS, RJ11 connector Support: G.711/G.723/G.726/G.729 codec Support: T.30/T.38/G.711 Fax mode, DTMF Relay Line testing according to GR-909 |
| LED | 1 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN2、 FXS |
| Push-Button | 3,For Function of Reset, WLAN, WPS |
| Operating Condition | Temperature: 0℃~+50℃ |
| Humidity: 10%~90%(non-condensing) | |
| Storing Condition | Temperature: -30℃~+60℃ |
| Humidity: 10%~90%(non-condensing) | |
| Power Supply | DC 12V/1A |
| Power Consumption | ≤6W |
| Dimension | 155mm×92mm×34mm(L×W×H) |
| Net Weight | 0.24Kg |
Panel lightsIntroduction
| Pilot Lamp | Status | Description |
| WIFI | On | The WIFI interface is up. |
| Blink | The WIFI interface is sending or/and receiving data (ACT). | |
| Off | The WIFI interface is down. | |
| WPS | Blink | The WIFI interface is securely establishing a connection. |
| Off | The WIFI interface does not establish a secure connection. | |
| PWR | On | The device is powered up. |
| Off | The device is powered down. | |
| LOS | Blink | The device doses not receive optical signals or with low signals. |
| Off | The device has received optical signal. | |
| PON | On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
| LAN1~LAN2 | On | Port (LANx) is connected properly (LINK). |
| Blink | Port (LANx) is sending or/and receiving data (ACT). | |
| Off | Port (LANx) connection exception or not connected. | |
| FXS | On | Phone has registered to the SIP Server. |
| Blink | Phone has registered and data transmission (ACT). | |
| Off | Phone registration is incorrect. |
Application
n Typical Solution:FTTH(Fiber To The Home)
n Typical Business:INTERNET、IPTV、WIFI 、VOIP etc
