Description
Overview:
BD04 is the four slot rack chassis media converter and can be inserted in 4 media converter cards. The rack chassis media converter provide SNMP network management function and full alarms display. The fiber media convert is a practical network solution which realize 10/100Base-TX to 100Base-FX fiber converter.
The fiber media converter can extend cable networks from 10/100Base-TX to 0-120KM fiber-optic network. It also provides the most popular connectors:ST、SC、MT-RJ、VF-45. The fiber media converter can support two power (one power for redundant0,which improving the network’s reliability.
Features
● Support IEEE802.3u, IEEE802.3, 10Base-TX, 100Base-TX and 100Base-FX standard
● Support 10/100M, full/half duplex auto-negociation
● Support compulsive set 10M,100M,full duplex, half duplex, which is convenient to connect CPE and protect previous invest when network upgrades.
● Installed with standard rack 19”
● It could realize media converter SNMP management. This is media converter module model name as BD-100M/CM04
● can insert 4 BD-100M/CM04 cards,
● support double power AC+DC, one for redundant
● support of SNMP via Management Ethernet port, remote management support of Web-based Network Management
● support 802.1Q,vlan function
● support LFP (link failure pass through)
● Support hot-plug and could work (MIBF) over 100,000hours, satisfies telecom grade operate standard and has full LED with complete work status.
● Dimension: 482mm（w）×44mm（l）×179mm（h）
Power supply
AC power supply：AC110～264V/50Hz
DC power supply：DC36～72V
Power consumption： ≤20W
Environment requirement
Working temperature：-10℃~50℃
Storage temperature： -40°C~+70°C
Humidity: 5%-90% (no condensation)
Fiber media converter supports centralized management of network devices,it can realize setting the network device , search information and daily maintain equipment .
Upper/lower temperature alarm thresholds can be set up.
Automatic monitoring and controlling remote power input, optical connections, electricity connections, data transfer, etc.
Display/View other parameter settings in the remote device, such as working mode, frame count,Optical port loopback, the status of communicating with the network management card.
The local/remote port reset: reset local/remote device manually.
Managed Media converter Module(Card):
Comply without our BD03 chassis,then realize central SNMP management
Transfer Ethernet 10/100 Mbps with Single Mode Optical Fiber
To have at least 1 port Ethernet port (RJ-45 connector) and 1 port optical fiber port (SC or LC connector)
Support of IEEE802.3, IEEE802.3u
Hot swappable
Optical Link Budget at least 16 dB and range operated at least 20KM.
To have Ethernet Link Loss Status to Ethernet Port
