E1 Ethernet POTs over STM1-16 Multi-service Optical Fiber SDH multiplexer, SDH/PDH/PCM all integrated
Short Description:
Multi-service Optical Fiber SDH multiplexer, E1 Ethernet POTs over STM1-16 multiplexer, SDH/PDH/PCM all integratedDescription
Specification
Application
Order
Downloads/FAQ
Product Tags
Reviews
Description
The optical SDH multiplexer is a carrier-class, cost-effective, compact (only 3U high), STM-1/STM-4/STM-16 SDH/MSTP platform that is designed for application in metro and access networks to facilitate the efficient transport of traditional TDM and emerging data traffic for service providers. The SDH device support add and drop multiplexer, BD-MUX04-LMXE+ has PCM function interfaces and SDH and PDH interfaces.
The optical SDH multiplexer is a card based compact SDH equipment, designed mainly as a gateway node between the core SDH network and a number of remote CPE boxes. It may also be used as a multi service SDH ADM node in a typical ring or mesh network. The add and drop multiplexer has 19 slots, with 2 slots for the 1+1 power cards, 1 slot for network management card, 2 slots for aggregation(uplink) cards, and 14 slots for service(downlink) unit cards.
Uplink cards support STM-16/STM-4/STM-1 optical interface and STM-1 electrical interface. Service cards support E1/V.35/E3/DS3/FE/GE/FXO/FXS/4W/E&M/OW/RS-232/V.24/ RS-422/485/V.11.
SDH multiplexer Features:
● Support up to STM-1/STM-4/STM-16
● SDH/PDH/PCM all integrated
● Large cross-connect matrix capacity is 96*96 high order VC-4 cross connection or 2016*2016 VC-12 or 96*96 VC-3 level full cross connection
● The add drop multiplexer support 1+1 MSP, SNCP protection
● Management channel can be DCC/E1/VC12
● Clocking mode supports: internal clock / external clock / line clock / clock holdover
● Ethernet service supporting GFP encapsulation, VC12 virtual concatenation and LCAS, P VLAN and 801.1Q VLAN
● E1 BER tester is embedded
● Support up to 110 Ethernet over 8*E1 (EoPDH or EoE) remote CPEs
● Support up to 756 Ethernet over 1*E1 (EoPDH or EoE) remote CPEs
● Support up to 110 Ethernet over VC-12 (EoSDH or EoS) remote CPEs
● Online upgrading
● Full redundancy design
SDH multipelexer Technical specification:
| Cross-connection capacity | STM-1: 20 x 20 VC-4s, 60 x 60 VC-3s, 1260 x 1260 VC-12s
STM-4: 32 x 32 VC-4s, 96 x 96 VC-3s, 2016 x 2016 VC-12s STM-16: 96 x 96 VC-4s, 96 x 96 VC-3s, 2016 x 2016 VC-12s |
| Cross-connection direction | Group to tributary, tributary to group, group to group, tributary to tributary, internal 64 kbit/s timeslot cross-connection of PCM cards |
| Cross-connection mode | bidirectional, unidirectional, multicast/broadcast and loopback |
| Optical SDH multiplexer protection capability | SNCP for VC-12, VC-3, and VC-4 services (Protection switching is implemented within 50 ms)
Linear 1+1 MSP, two-fiber unidirectional MSP at the STM-1 and STM-4 levels |
| Power redundant supply | Two power cards work in 1+1 backup mode. |
| NM channel | External DCN
DCC NM channel: select any group from D1-D3, D4-D6, D7-D9, and D10-D12 E1 NM channel: assigned to any VC-12 of the cross-connection card or STM card, or E1 port on the E1 interface card. EoE in-band NM channel N*64 kbit/s in-band monitoring Monitoring channels of PCM cards (Sa in-band monitoring) |
| E1 protection capability | Support 1+1 protection between any two E1 and 56 pairs protection can be configured at most |
| Chassis dimention (W x D x H) | 440mm×280mm×130mm |
| Power supply | DC power supply: -48 V DC
AC power supply: 220 V/110 V AC |
| Maximum Power Consumption | Typical application: ≤85W |
| Operating environment (temperature, humidity) | -15°C ~ +55°C, 0-95%RH (non-condensing) |
| Storage environment(temperature, humidity) | -40°C ~ +105°C, 0-95%RH (non-condensing) |
Specification
SDH multipelexer Technical specification:
| Cross-connection capacity | STM-1: 20 x 20 VC-4s, 60 x 60 VC-3s, 1260 x 1260 VC-12s
STM-4: 32 x 32 VC-4s, 96 x 96 VC-3s, 2016 x 2016 VC-12s STM-16: 96 x 96 VC-4s, 96 x 96 VC-3s, 2016 x 2016 VC-12s |
| Cross-connection direction | Group to tributary, tributary to group, group to group, tributary to tributary, internal 64 kbit/s timeslot cross-connection of PCM cards |
| Cross-connection mode | bidirectional, unidirectional, multicast/broadcast and loopback |
| SDH multiplexer Optical protection capability | SNCP for VC-12, VC-3, and VC-4 services (Protection switching is implemented within 50 ms)
Linear 1+1 MSP, two-fiber unidirectional MSP at the STM-1 and STM-4 levels |
| Power redundant supply | Two power cards work in 1+1 backup mode. |
| NM channel | External DCN
DCC NM channel: select any group from D1-D3, D4-D6, D7-D9, and D10-D12 E1 NM channel: assigned to any VC-12 of the cross-connection card or STM card, or E1 port on the E1 interface card. EoE in-band NM channel N*64 kbit/s in-band monitoring Monitoring channels of PCM cards (Sa in-band monitoring) |
| E1 protection capability | Support 1+1 protection between any two E1 and 56 pairs protection can be configured at most |
| Chassis dimention (W x D x H) | 440mm×280mm×130mm |
| Power supply | DC power supply: -48 V DC
AC power supply: 220 V/110 V AC |
| Maximum Power Consumption | Typical application: ≤85W |
| Operating environment (temperature, humidity) | -15°C ~ +55°C, 0-95%RH (non-condensing) |
| Storage environment(temperature, humidity) | -40°C ~ +105°C, 0-95%RH (non-condensing) |
Application
EoE aggregation
EoS aggregation
PCM/SDH integration
Order
| Product Model | Descriptions | Inquiry |
|---|---|---|
| LMXE+.BOX | 19", 3U，with 2 Power Slots,1 Network Management Slot, 2 Aggregation Service Slots, 14 Tributary Service Slots | Request Price |
| LMXE.PWR01 | DC -48V Power Supply, Can be 1+1 | Request Price |
| LMXE.PWR02 | AC 220V Supply, Can be 1+1 | Request Price |
| LMXE.NM02 | Network Management Card with 2 RJ45 Management Ethernet Ports, Supporting Online Upgrading | Request Price |
| LMXE.OX01 | Dual STM-1 Interfaces per Card (Default S1.1), SC Type. cross connection Matrix and Timing Processing are Embedded. (L1.1,L1.2, Single fiber Bi-Directional options are Available) | Request Price |
| LMXE.OX01/L | Dual STM-1 Interfaces per Card (L1.1), SC Type. cross connection Matrix and Timing Processing are Embedd | Request Price |
| LMXE.OX01/LB | Dual STM-1 Interfaces per Card (L1.2), SC Type. Cross connection Matrix and Timing Processing are Embedd | Request Price |
| LMXE.OX01S | Dual STM-1 Interfaces per Card, SFP Type. Cross connection Matrix and Timing Processing are Embedded. (SFP should be Ordered Separately). (S1.1,L1.1,L1.2, Single fiber Bi-Directional options are Available). | Request Price |
| LMXE.OX04 | Dual STM-4 Interfaces per Card, SFP Type. Cross connection Matrix and Timing Processing are Embedded. (SFP should be Ordered Separately) (S4.1,L4.1,L4.2, Single fiber Bi-Directional options are Available). | Request Price |
| LMXE.OX16 | Dual STM-16 Interfaces per Card, SFP Type. Cross connection Matrix and Timing Processing are Embedded.(SFP should be Ordered Separately) (S16.1,L16.1,L16.2, Single fiber Bi-Directional options are Available). | Request Price |
| LMXE.EX01 | Dual STM-1 Electrical Interfaces per Card, CC4 Interface Type. Cross connection Matrix and Timing Processing are Embedded. | Request Price |
Downloads/FAQ
Q: How many sites can be managed by the SDH management software?
A: it can manage more than 700 sites.
Q: Do we need to install the management software in server and client site?
A: The server management software need to be installed in server, the client software need to be installed in remote PC.
The client PC can be communicate with server normally.
You also can install both the server software and client software in server.
Q: Does the SDH equipement management software need license? Is it free?
A: The license will be permanent free.
Product Tags
Reviews
0 reviews
5
Ethernet over SDH STM-1 converter
