ONU CATV GPON support remote switch on off CATV
Short Description:The onu catv gpon is designed as HGU (Home Gateway Unit) in different FTTH solutions, which has one GE port and one CATV port. The 1GE CATV GPON onu is mature and stable, cost-effective. The ONU catv gpon can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. 1GE CATV adopts high reliability, easy management, support bridge and router mode. The gpon onu catv service can easily be remotely switched ON or OFF.
The onu catv gpon is designed as HGU (Home Gateway Unit) in different FTTH solutions, which has one GE port and one CATV port. The carrier-class FTTH application provides data service access. The 1GE CATV GPON onu is based on mature and stable, cost-effective XPON technology. The ONU catv gpon can switch automatically with EPON and GPON mode when it access either EPON OLT or GPON OLT. 1GE CATV adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0. The xpon onu is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah. The ONU catv is designed by Realtek chipset 9601D.
The gpon onu catv service can easily be remotely switched ON or OFF.
- Supports CATV XPON ONU Dual Mode (can access GPON or EPON).
- Supports SFU and HGU of EPON CTC 3.0 standard
- Supports GPON G.984/G.988 standards and IEEE802.3ah.
- Support CATV interface for Video Service and remote control by Major OLT
- Support NAT, Firewall function.
- Support Flow & Storm Control, Loop Detection, Port Forwarding and Loop-Detect
- Support port mode of vlan configuration
- Support LAN IP and DHCP Server configuration
- Support TR069 Remote Configuration and maintenance
- Support Route PPPoE/DHCP/Static IP and Bridge mixed mode
- Support IPv4/IPv6dual stack
- Support IGMPv2, IGMPv3, MLDv1, MLDv2, IGMP snooping/proxy
- Compatible with most of OLT brand, BAUDCOM OLT, VSOL OLT, CDATA OLT, Huawei OLT, ZTE OLT, FiberHome OLT etc.
|Pon interface||1 GPON/EPON port(EPON PX20+ and GPON Class B+)
Upstream: 1310nm, Downstream: 1490nm
Receiving sensitivity: ≤-28dBm
Transmitting optical power: 0~+4dBm
Transmission distance: 20KM
|LAN interface||10/100/1000Mbps auto adaptive Ethernet interfaces.
10/100/1000M Full/Half, RJ45 connector
|CATV Interface||RF, optical power : +2~-18dBm
Optical reflection loss: ≥45dB
Optical receiving wavelength: 1550±10nm
RF frequency range: 47~1000MHz, RF output impedance: 75Ω
RF output level: ≥ 82dBuV（-7dBm optical input）
AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm
MER: ≥32dB(-14dBm optical input), ＞35(-10dBm)
|LED||6 LED, For Status of POWER, LOS, PON, LAN, NORMAL, WARN|
|Push-Button||2, for Function of Power on/off, Reset|
|Operating condition||Temperature : 0℃～50℃
|Storing Condition||Temperature : -40℃～+60℃
|Power supply||DC 12V/1A|
- Typical Solution：FTTO(Office)、 FTTB (Building)、FTTH(Home)
- Typical Service：Broadband Internet access, IPTV, VOD, CATV and Video Surveillance.
The onu catv gpon provide stable and high quality data and video service
The GPON ONU CATV can be remotely controlled switch ON/OFF
|BD-ONU-311R||CATV ONU GPON, 10/100/1000Mbps auto adaptive Ethernet（RJ45), 1 SC/APC Connector, 1 RF CATV Connector, Plastic Casing, External power supply adapter||Request Price|
Question1: How i can control the client? I want to disable catv of ONU CATV GPON modem.
Answer: You can remote manage the CATV. You can switch off the CATV via the OLT.
Question1: I use ZTE OLT, can your catv ONU work?
Answer: Yes, our 1ge catv xpon onu can be compatible with ZTE OLT. You also control the ONU via ZTE OLT.