serial to wifi converter
Short Description:
Baudcom RS232 RS485 serial to wifi converter connect your serial devices to an 802.11 b/g network. Bring wireless to serial devices via embedded serial to wifi module. The serial wifi converter netweork function port support Wi-Fi and Ethernet, the Ethernet port support router function, UART function port support RS232 and RS485 (the two port can’t use toge…Description
Specification
Application
Order
Downloads/FAQ
Product Tags
Reviews
Description
Baudcom RS232 RS485 serial to wifi converter connect your serial devices to an 802.11 b/g network. Bring wireless to serial devices via embedded serial to wifi module. The serial wifi converter netweork function port support Wi-Fi and Ethernet, the Ethernet port support router function, UART function port support RS232 and RS485 (the two port can’t use together). The serial to wifi ethernet converter not only can achieve RS232/485 to WiFi、RS232/485 to Ethernet, But Also can achieve Ethernet and Wi-Fi two-way data transparent transmission.
Characteristic:
● EmbeddedUART to Wi-Fi device, hardware flow control (RTS/CTS) RS232 interface
● Support IEEE802.11b/g/n Wireless standards
● Support TCP/UDP/HTTP/TLS/Modbus Network Protocols
● Support RS232/RS485/Ethernet Data Interface
● RS232 RS485 automatic switching
● Support Work As STA/AP/AP+STA Mode
● Support Router/Bridge Mode Networking
● Support AT+ Instruction Set for Configuration
● Support Friendly Web Configuration Page
● Single 5~18V DC Power Supply
● Size: 84 x 84 x 25mm
● FCC/CE/TELEC/RoHs Certificated
Serial to wifi converter Specification:
| Processor | MIPS |
| Basic Frequency | 380MHz |
| Flash | 1MB |
| SDRAM | 8MB |
| Operating System | eCOS |
| Ethernet | |
| Interface Standard | RJ45 |
| Rate | 10/100M |
| Protection | 2KV electromagnetism isolation, shell insulation blocking |
| Network Protocol | IP，TCP，UDP，DHCP，DNS，HTTP，ARP，ICMP，Web socket，Httpd client |
| Security Protocol | Client ：SSL v3（2048bit） Encryption：AES-CCMP、3DES Authentication：SHA-1、MD5、Base-64 |
| WIFI | |
| Standard | 802.11 b/g/n, Frequency : 2.412GHz ~ 2.484GHz |
| Network Mode | STA/AP/STA+AP |
| Access Terminal Quantity in AP Mode | Max. 32 STA |
| Transmit Power | 802.11b: + 20 dBm (Max), 802.11g: +18dBm (Max), 802.11n: +15 dBm (Max), E.I.R.P. : <100 mW (include 3dBi antenna) |
| Receive Sensitivity | 802.11b: -89 dBm (@11Mbps, CCK) 802.11g: -81dBm (@54Mbps, OFDM) 802.11n: -71dBm (@HT20, MCS7) |
| Wi-Fi Security | Encryption：TKIP、WEP（64/128bit）、WPA、WPA2、AES-CCMP Authentication：PSK |
| Antenna Interface | SMA(female)，50Ohm |
| Port Number | 2 (RS232+RS485) |
| Interface Standard | RS-232：DB9 pin type， RS-485：2 wire（A+，B-） |
| Data Bits | 5，6，7，8 |
| Stop Bit | 1，2 |
| Check Bit | None，Even，Odd，Space，Mark |
| Baud Rate | RS-232：600 bps~230.4K bps， RS-485：600 bps ~ 230.4K bps |
| Flow Control | RTS/CTS |
| Buffer | 4K |
| Configuration | Built-in webpage：Http Computer set-up software Serial command： CLI Support configuration record：Log Remote Configuration：Telnet |
| Virtual Serial | Windows, XP/Vista, 7， Server 2003/2008 |
| Size | 84 x 84 x 25（mm） |
| Operating Temp. | -25 ~ 70°C |
| Storage Temp. | -45 ~ 85°C， 5 ~ 95% RH（no condensation） |
| Input Voltage | DC 5~18V |
| Working Current | ~220mA |
| Power | <1W |
| Certificate | CE，FCC |
| Warranty | 1 year |
| Accessory | 1* 5V/1A Power Adapter 1* Serial Cable 1* Ethernet Cable 1* 3dBi Antenna |
Specification
Application
Order
| Product Model | Descriptions | Inquiry |
|---|---|---|
| BD-SERIAL-ETH-W | 1 x DB9M connector with software selectable RS232/485 interface, 10/100 Ethernet,power AC220V | Request Price |
Downloads/FAQ
Product Tags
Reviews
1 reviews
5
1 条回复
Serial to Ethernet Converter Console server
Flat fiber optic cable outdoor 1 Cores FTTH
Good product, easy configuration.