1~64 POTS (FXO/FXS) over Fiber multiplexer - Baudcom ...

1~64 POTS (FXO/FXS) over Fiber multiplexer

1~64 POTS (FXO/FXS) over Fiber multiplexer

Short Description:

Functions 1~64 POTS (FXO/FXS) over Fiber multiplexer is a kind of point-to-point fiber transmission …
  • Payment Terms: Paypal,western union,L/C,D/A,D/P,T/T

  • Description

    Specification

    Application

    Order information

    Q&A

    Product Tags

    Reviews

    Description

    Functions

    1~64 POTS (FXO/FXS) over Fiber multiplexer is a kind of point-to-point fiber transmission device. BAUDCOM designed 1~64POTS (FXO/FXS), 1~4channel G.703 E1 and 1~4 channel 100M Ethernet,1~4 channelRS232  transmit over one fiber, and it could match different customer requirement.

    PRODUCT CHARACTERISTIC
    • provides 1~4 channel E1/ G.703 for option;
    • provides 1~4 channel 100M (liner) Ethernet ports for option;
    • provides 1~64channel POTS( FXO/ FXS),also can offer 2/4 wire E&M for option;
    • provides 1~4 channel RS232, rate supports 300-15200 bps for option;
    • Ethernet port 10/100M, full/half duplex auto-adaptable and supports VLAN;
    • Ethernet port supports AUTO-MDIX (twisted cable and straight cable auto-adaptable);
    • 1~30 channel voice connection, supports calling indication;
    • Configuration: point to point;
    • Voice port supports O port and S port, O port connects switch and S port connects user’s phone;
    • Optical interface supports SC/FC interface and supports single fiber interface
    • 1+1 optical for protection
    FXO port
    Alarm voltage 75V
    Alarm frequency 25HZ
    2 line input impedance 600Ω (hanging off)
    Wastage 40db
    FXS port
    Alarm detecting voltage 35V
    Alarm detecting frequency 17HZ-60HZ
    2 line input impedance 600Ω (hanging off)
    E&M port
    E wire M wire
    Max current: 22mA steady current: 7 mA
    Saturation voltage: 3V min test current: 5 mA
    Dial speed: Pluse dial recognition>20pps
    10/100BaseT Interface
    Number of Interfaces 1~4  port
    Interface Types 10/100BaseT
    Standards Compliance IEEE 802.3
    Protocol User Programmable HDLC
    Connectors B RJ45 (10/100 BaseT Electrical)
    E1 Interface
    Number of Interfaces 4  port
    Line Rate E1 (2.048Mbps ± 50 bps)
    Line Code HDB3
    Electrical ITU-T G.703
    Jitter G.823
    Impedance 75hom/120 Ohms
    Connectors BNC(75ohm) or RJ45(120ohm)
    Vibration Characteristic Satisfies G.742 and G.823 standard
    RS232 interface
    rate 30~115.2kbps auto adaptable (Asychronous)
    Connector RJ45
    Interface Characteristic Satisfies ITU-T V.24 standard
    Optical  Interface
    Optical interface SC/FC/ST
    Wavelength 1310nm/1550nm for single-mode optic interface for option

    850nm/1310nm for multi-mode optic interface for option

    Sending consumption: -9dBm (regular order)
    Receiving and dispatching module: >-36dBm(regular order)
    Optical receiver receiving sensitivity: <-36 (BER<10):
    Optical code: NRZ
    Transmit distance MM 2Km/5Km,SM 20Km/40Km/60 Km/120Km for option
    Mechanical Specifications
    Rack Mounting Standard 19-inch DIN rack
    Dimension 19inch 1 U: 433mm(L)*138mm(D)*44mm(H)
    Management for option
    Web managed built-in or SNMP central management via chassis
    Power Supply
    Input AC/DC voltage -48V DC ( nominal ) / AC also available
    Range of input -36V to -72V DC /90V~260VAC
    Temperature 0  centi degree to 55 centi degree
    Humidity 95% RH (non-condensing)
    Cooling Convection Cooling
    Order information
    BD-OP-MUX64 64POTS(FXO/FXS) over Fiber multiplexer
    BD-OP-MUX64/4E1 64POTS(FXO/FXS) ,4E1 over Fiber multiplexer
    BD-OP-MUX64/4E1/4ETH 64POTS(FXO/FXS) ,4E1 ,4Ethernet over Fiber multiplexer
    BD-OP-MUX64/4E1/4ETH/4RS232 64POTS(FXO/FXS) ,4E1 ,4Ethernet ,4RS232 over Fiber multiplexer
    BD-OP-MUX64/DFI 64POTS(FXO/FXS) over Fiber multiplexer,1+1 fiber for protection
    BD-OP-MUX64/SNMP 64POTS(FXO/FXS) over Fiber multiplexer,web managed or SNMP for option

    Question: The E1 port on the POTS over Fiber Multiplexer is a RJ45 integrated 2-way E1. What kind of cable should I use to connect the E1 device?

    Answer: You can use twisted pair (ordinary network cable) to connect the device, and make sure that the line sequence is correct. One end of the network cable is one RJ45 connector, and the other end is two RJ45 connectors.

    Specification
    Application

    Order information
    Product Model Descriptions Inquiry
    BD-OP-MUX64 64POTS(FXO/FXS) over Fiber multiplexer Request Price
    BD-OP-MUX64/4E1 64POTS(FXO/FXS) ,4E1 over Fiber multiplexer Request Price
    BD-OP-MUX64/4E1/4ETH 64POTS(FXO/FXS) ,4E1 ,4Ethernet over Fiber multiplexer Request Price
    BD-OP-MUX64/4E1/4ETH/4RS232 64POTS(FXO/FXS) ,4E1 ,4Ethernet ,4RS232 over Fiber multiplexer Request Price
    BD-OP-MUX64/DFI 64POTS(FXO/FXS) over Fiber multiplexer,1+1 fiber for protection Request Price
    BD-OP-MUX64/SNMP 64POTS(FXO/FXS) over Fiber multiplexer,web managed or SNMP for option Request Price
    Q&A
    Product Tags
    Reviews

    0 reviews

    5

    5 start 5 0
    4 start 4 0
    3 start 3 0
    2 start 2 0
    1 start 1 0

    Captcha

    The maximum file allowed is 20 MB MB. You can upload images and videos. Drop files here

    Leave Your Message