SDH Optical Terminal, PCM E1 V35 Ethernet over STM-1 - Baudcom

Multi Service STM-1 SDH Optical Terminal PCM E1 V35 Ethernet

Multi Service STM-1 SDH Optical Terminal PCM E1 V35 Ethernet

Short Description:

BD-MSOT is a multi-service STM-1 SDH Optical Terminal. It Supports multi-service transmission and sdh service, which supporting PCM, E1, V.35 and ethernet including VLAN function. BD-MSOT is designed as a PCM over STM-1 level optical terminal with two 155.520Mb/s optical interfaces (SFP slots) to provide an ultra-compact, cost-effective and flexible multi-service platform.
  • Payment Terms: Paypal,western union,L/C,D/A,D/P,T/T

  • Description

    Specification

    Application

    Order information

    Q&A

    Product Tags

    Reviews

    Description

    BD-MSOT is a multi-service STM-1 SDH Optical Terminal. It Supports multi-service transmission and sdh service, which supporting PCM, E1, V.35 and ethernet including VLAN function. BD-MSOT is designed as a PCM over STM-1 level optical terminal with two 155.520Mb/s optical interfaces (SFP slots) to provide an ultra-compact, cost-effective and flexible multi-service platform.
    In PCM over STM-1 optical multiplexer, PCM signals are encapsulated in the STM-1 frame structure and are transmitted at high speed and long distance through transmission media such as optical fiber.

    Port Configuration PCM FXS FXO over STM-1

    BD-MSOT supports 4 port-based VLAN and 4 IEEE 802.1Q tag-based VLAN. So it is a 8 port STM-1 SDH Optical Terminal with sdh service. By adopting ITU-T G.7041, G.7042 and G.707-compliant EOS (Ethernet Over SDH) technology and VLAN technology, each Ethernet port can employs 1~4 separate Virtual Concatenation Groups (VCG), and each VCG can be assigned to one or more Ethernet ports. The bandwidth of VCG can be flexibly configured for efficient transmission of Ethernet data over SDH network.It is also a multi service fiber access terminal.

    Function

    The SDH Optical Terminal supports NE management based on CLI command and network management platform based on SNMP_V1 and SNMP_V2 protocol, to perform excellent management such as configurations, alarm monitoring and performance statistic.

    SDH optical terminal Communication standards

    BD-MSOT is suitable for data access network on the client side. It is called STM-1 optical terminal.With the technology compliant to ITU-T standards, it can communicate with products from other vendors adopting the same standards.

    Features

    • Standard rack with 1U height and 19 Inch width
    • Optical Interface
      • Two STM-1 interfaces, LC type SFP module, hot pluggable
      • Complies with GB/T15941-1995 and ITU-T G.813 standards
      • Supports RPD (Remote Power down Detection) information sending function
      • Supports ALS (Automatic Laser Shutdown) to protect operators from hurt
    • Ethernet Interface
      • Four LAN ports(physical port), each LAN port supports auto-negotiation, it can also be set to 10M full/half-duplex, 100M full/half-duplex mode by force
      • Four WAN ports (internal port and invisible), each WAN port employs a VCG; the total bandwidth of 4VCGs is 63 VC-12 and the bandwidth of optional oneVCG is up to 48 VC-12(100Mbps)
      • The LAN and WAN ports are compatible with IEEE802.3/802.3u standard
      • Supports flow control and broadcast storm filtering control
      • Supports port-based VLAN and IEEE802.1Q tag-based VLAN
      • Supports GFP-F Encapsulation specification complying with ITU-T G.7041
      • Supports VCAT specification complying with ITU-T G.707
      • Supports LCAS specification complying with ITU-T G.7042
      • Provides both LCAS and Non-LCAS modes
      • The maximum tolerated differential delay between any two VC-12 channels is 112ms
    • Three kinds of modules available for user service interfaces combination: 4E1/8E1,  2E1+V.35, 8E1+8PCM/16PCM/30PCM
    • E1 Interface
      • Up to 8E1
      • Optional 120Ω balanced E1 interface / 75Ω unbalanced E1 interface
      • E1 interface complies with ITU-T G.703 standard
    • V.35Interface
      • DB25connector, complies with ITU-T V.35 standard
      • V.35interface supports non-framed and framed mode, the bit rate is N×64Kbps(N=1~31)in framed mode and 2048Kbps in non-framed mode
      • In framed mode, the PCM30/PCM31/PCM30C/PCM31Cmode is optional
      • Supports DCEand DTE mode, in DCE mode, the master timing and tracing timing is optional; while in DTE mode, it only supports tracing V.35 timing
      • Supports phase settings between 35output data and clock
      • Supports link fault pass through function, which can notify  that the E1 sideis failed
    • PCM over STM-1 interface
      • Up to 30 FXO / FXS interfaces
      • Up to 16 magneto interfaces
      • Up to 8 2/4-wire E&M audio interfaces
      • Up to 8 64K data/ RS232 /RS485 data
    • Supports point-to-point, chain, ring and mixed networking with other STM-1
    • Cross-connection with TU-12 granularity
    • SDH equipment timing mode (SDH Optical Terminal Service)
      • ITU-T G.813 internal oscillator
      • STM-1 line timing (T11,T12)
      • The timing source can be automaticallyswitched according to a programmed principle or forced switched by operator.
    • Protection
      • Supports 1+1 path protection with switching time less than 50ms
      • Supports Automatic protection mode and manual protection mode
    • Supports embedded BERT (Bit Error Rate Tester) and various loop back for troubleshooting
    • Supports FTP protocol and firmware download online without disturbance of existing traffic
    • NE Management
      • Provides serial management interface (CONSOLE) and Ethernet management interface (EMU), both adopt RJ45 connector
      • Supports network management based on SDH overhead or on internal E1 channel
      • Supports NE management based on CLI command via RS232 interface or TELNET
      • Supports RayView network management platform based on SNMP_V1 and SNMP_V2 protocol to perform excellent management
    • Supports hot-spare power, the power consumption is less than 15W /25W
      • -48V DC single power access;
      • -48V DC double power access;
      • 220V AC single power access;
      • 220V AC double power access;
      • -48V DC+220V AC double power access;
    Specification
    Application
    SDH-optical-terminal-Point-to-Point-Network-Application

    Application Point to Point Network Application

    SDH-optical-terminal-Chain-Network-Application

    Application2 Chain Network Application

    STM-1-optical-terminal-Ring-Network-Application-3

    Application3 Ring Network Application

    Order information
    Q&A
    Product Tags
    Reviews

    0 reviews

    5

    5 start 5 0
    4 start 4 0
    3 start 3 0
    2 start 2 0
    1 start 1 0

    Captcha

    The maximum file allowed is 20 MB MB. You can upload images and videos. Drop files here

    Related Products

    E1 Ethernet POTs over STM1-16 Multi-service O...

    Multi-service Optical Fiber SDH multiplexer, E1 Et... Read More
    Leave Your Message