Optical Fiber Identifier

Description

General Description:

The Live Optical Fiber Identifier allows you to detect traffic and measure signals anywhere on single-mode fibers without having to disconnect them. It also lets you check for signal presence before rerouting or maintenance, perform continuity tests, and verify cable labeling. Based on non-destructive macrobending technology, the fiber identifier doesn’t disrupt traffic or damage or overstress the fiber, enabling efficient, accurate, and reliable data acquisition

Features:

• Indicate the signal directions in fiber;
• Indicate the signal presence or absence (Live or dark fiber);
• Detect tones 270Hz,  1kHz and 2kHz to verify the modulated signal type;
• Suitable for 0.25, 0.9, 2.0, 3.0mm fiber, and no need to replace the clamp block.

more convenient than others

• Build in VFL 1mW or 10mW optional
• Battery low indication;
• Powered by 2 units of 1.5V AA batteries;
• One-year warranty and Three-year recommended calibration interval

Optical Fiber Identifier Specification

* at 20±3℃,indoor, 1550nm wavelength, 0.9mm fiber, with white coat, 270Hz, error < 5

* 0.25, 2.0, 3.0mm fiber, the performance at continuous wave will be lower

* 1KHz, 2KHz, the performance at modulated signal will be lower

* at 1310nm wavelength, the performance will be lower