Portable Fusion Splicer FTTH – High-Speed, Core-to-Core Alignment
Short Description:
This portable fusion splicer delivers blazing-fast 8-second splicing and 30-second heating, slashing your project time. Its PAS core-to-core alignment guarantees precision, while the durable, lightweight design and 200-cycle battery make it the ultimate partner for any FTTH or field maintenance task.Description
Specification
Application
Order information
Q&A
Product Tags
Reviews
Description
Portable Fusion Splicer is designed to be carried and used in tight or remote locations. The all-metal body weighs 1.6 kg including the battery, and the built-in lithium battery supports about 200 splice-heat cycles, enough for a typical day of field work or emergency call-outs. It suits FTTH, ordinary fiber projects, construction, inspection, and maintenance, and its handheld operation is friendly to beginners. The high performance-to-price ratio also makes it practical for contractors buying multiple units or working within tight budgets.
The 8-second splicing and 30-second heating times reduce the time spent on each joint, which helps speed up FTTH drops, cable repairs, and routine maintenance. PAS core-to-core alignment helps lower splice loss and supports more consistent results. The 4.3-inch LCD screen, 300X/150X magnification, simultaneous X/Y view, split-screen display, and image storage let technicians inspect and record each splice on site. The three-in-one fixture handles single fiber, indoor cable, and pigtail without changing fixtures, which cuts setup time.
Portable Fusion Splicer Feature
● Used for FTTH and ordinary fiber project
● Core to core alianment by PAS technology
● 8 sec splicing time and 30 sec heat time
● 300 X or Y view, 150 X and Y view
● Image storage function
● Split screen display function
● 4.3 inch digital high quality LCD screen, observe X and Y view at same time
● Three in one fixture, splicing single fiber, cable indoor and pigtail
● Built in large capacity lithium battery of 200 times splicing and heating
● All metal shell, high strength and beautiful appearance, small size and light weight, 1.6KG including battery
How to Use Fiber Optic Cable Fusion Splicers
Specification
|
Model |
Handheld Fusion Splicer BD-FS-35 |
|
Splicing Type |
SM, MM, DS, NZDS |
|
Splicing Loss |
0.02dB(SM)，0.01dB(MM)，0.04dB(DS)，0.04dB(NZDS) |
|
Return Loss |
>60dB |
|
Splicing Mode |
Manual, Half Auto, Auto |
|
Fiber Alignment |
Core to Core Alignment by PAS technology |
|
Applicable Fiber |
Cable indoor and 0.25mm,0.9mm fiber, SC connector(option) |
|
Splicing Time |
≤9s |
|
Heat Time |
≤30s AUTO HEAT |
|
Cleaved Length |
8～16mm |
|
Fiber Image/ Magnification |
300/150 Image storage Split screen display |
|
View Display |
4.3 inch digital high quality LCD screen |
|
Tension Test |
Standard 2N (option) |
|
Heat Shrinkable Sleeve |
60mm, 40mm and serials heat Shrinkable Sleeve |
|
Battery Capacity |
300 cycles splicing and heating, 3 hours charging time ( splicing and charging at same time) |
|
Battery Life |
Cycling charge 300-500 times, easy to replace battery |
|
Electrodes Life |
3000, easy to replace electrodes |
|
Power Source |
≤20W |
|
Interface |
USB Convenient data download and software update |
|
Construction Lighting |
Built in high brightness, wide range of lights, easy to operate at night |
|
Power supply |
Built in lithium battery 5200mAh 11.1V; external adapter, input: AC100-240V, output: DC13.5V/4.5A |
|
Operating Condition |
0-5000m above sea level, Temperature: -10-60℃, Humidity:0～95%RH (No dew) |
|
Weight |
1.6KG (including battery), 1.1KG (excluding battery) |
|
Dimension (LxWxH) |
200mm(L)×130mm(W)×98mm(H) |
Application
Order information
| Product Model | Descriptions | Inquiry |
|---|---|---|
| BD-FS-35 | fiber fusion splicer | Request Price |
Q&A
Q: is the fusion core-core true?
A: these fusion splicers are Core-core.
Product Tags
Reviews
1 reviews
5
1 条回复
Ribbon fiber fusion splicer 12 Fiber for Netw...
BD-FS-41B Fiber Optic Fusion Splicer
It is very convenient to use, with a handheld working principle. Through gentle propulsion and internal high-voltage arc, the fiber optic cross-section can be easily melted and fused, which meets the needs of me as a beginner to implement fiber optic modules on my own