BD-FS-41B Fiber Optic Fusion Splicer
Short Description:
Fiber splicer has four motors, high splice precision, high reliability, dust/water/shock resistant, touch screen, easy operationDescription
Specification
Application
Order information
Q&A
Product Tags
Reviews
Description
The Fiber optic fusion splicer has four motors, high splice precision, small size, light weight, high reliability, dust/water/shock resistant, touch screen, can replace fujikura fusion splicer 70S. The fiber splice machine is a compact splicer that is primarily used to fuse and protect common communications strands. The splicer’s extensive functionality and extremely low splice loss make it adaptable to fiber splicing in a variety of settings. It has a light weight, small size, higher environmental adaptation, high dependability, dust/wate/shock resistant properties. To suit the needs of a wide range of clients, a variety of fusing and heating modes are provided. The high-precision ceramic V-groove, which is easy to clean and maintain, makes fiber loading more convenient and accurate. Dual-directional fusion is possible with the fiber splicer. The touch screen monitor provides newly designed graphical interfaces that are simple to use. The large-capacity modular pluggable lithium-ion battery ensures long-term field operations. The auto environment adjustment mechanism dramatically increases the splicer’s adaptability to hostile settings, allowing for low-loss splice consistency in a variety of conditions.
Related Link:
learn fiber optic splicing-not Splice When Optic In Fiber
Specification
Specification
Model | BD-FS-41B Optical Fiber Fusion Splicer |
Motor qty | 4 |
Alignment method | Cladding alignment, manual alignment |
Applicable fibers | Any common optical fibers, rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653, ITU-TG.655 and ITU-TG.657. |
Optical fiber diameter | Cladding: 80~150μm, coating layer: 0.1~3mm |
Cleave length | 5~16mm(coated optical fiber diameter≤250μm);10mm(coated optical fiber diameter:0.25~3mm) |
Splice loss(typical) | 0.02dB(SMF); 0.01dB(MMF); 0.04dB(DSF); 0.04dB(NZDSF) |
Return loss | Better than 60dB |
Splicing time (typical) | 7s (Fast mode) |
Heating time (typical) | 18s(60mm protection sleeve) |
Tension | 1.96~2.25N |
Protection sleeve | 60mm, 40mm and a series of protection sleeves |
Graphical display | High-performance 4.3 inch LCD |
Magnification time | 320 times/88 times, 700times |
Fusion records | 10000 groups |
Remote maintenance | N/A |
Battery capacity | 11.1V, 5200mAh |
Battery service life | Cycle charging: 300~500 counts, can be replaced by customers |
Electrode service life | Typical: 4000 counts, can be replaced by customers |
Construction lighting | Built-in lights with high-brightness and wide lighting area |
Working environment | Temp:-10~50℃;Hum: 0~95%RH,height above sea level: 0~6000m |
Operation interfaces | GUI (graphical user interfaces) |
External power | AC: 100~240V, 60Hz, 0~1.5A; DC: 10~15V |
Port | USB / SD |
Dimensions | 120mm(W)×130mm(H)×154mm(D)(without rubber anti-vibration pad) |
Weight | 1.8kg (the battery not included), 2.1kg(included the battery) |
Application
BD-FS-41B Optical Fiber Fusion Splicer is compact equipment deploying the design of ergonomics, which delivers convenient operation and handy carrying case. Event very short fibers can be spliced easily. It’s capable of construction and maintenance of optical fiber line projects (including trunk), emergency repair, production and test of optical fiber devices and research and study in institutes.
Order information
Product Model | Descriptions | Inquiry |
---|---|---|
BD-FS-41B | Fully Automatic Operation Fiber Optic Fusion Splicer | Request Price |
Q&A
Question1: Can the fiber optic fusion splicer work on 4000-5000meter attitude?
Answer: Yes, the fiber fusion splicer is military grade fiber splice machine which can work well on 5000meter attitude.
The customer must perform arc calibration firstly. The fiber fusion splicer machine will record this parameter after calibration, and it will work normally.
When return to normal sea level attitude, please do the arc calibration again, the splicer machine will return to normal parameters.
Question2: Could you do OEM for us?
Answer: Yes, we can do artwork including printing, logo etc. for you, the device will with your LOGO on fusion splice case.
Question3: How can we place order?
Answer: After we made agreement on the product’ parameters, we will make proforma invoice for your confirmation.when we got your advance payment (deposit) we will arrange the production and delivery.
If you have your own ship forwarder, we will use your ship forwarder to delivery goods. if you don’t have ship forwarder, then when the goods arrived at Destination port, you must find a ship forwarder help you clear the custom.
Question4: Can fiber holder switch to connector holder?
Answer: Yes, the fiber holder on fusion splicer can be switched to connector holder, then you can fuse the connector and the fiber.
Question5: Does this item come with heat shrink tubes? How many?
Answer: Dear Customer, the standard accessory include a pair of electrodes, fiber cleaver, miller stripper, etc, but heat shrink tubes(also called fiber splice sleeve) are not included. You can order the heat shrink tubes sperately from us.
Question6: How often do I have to charge the battery if we do not use this Fiber Splice Machine?
Answer: To maximize the battery performance and prolongs its service life, it is better to recharge the fiber splicer machine every 3 months when you do not use this Fusion Splicer for long period.
Question7: What is the brand of the battery in BD-FS-41B?
Answer: The battery in BD-FS-41B fusion splicer is lithium battery and the brand is SANYO from Japan.
Question8: Can the fiber clamps of the cutter and fusion splicer be disassembled and interchangeable?
Answer: The fiber clamps of the cutter and fusion splicer can be disassembled, but not interchangeable.
Question9: Can the fiber clamps of the cutter and fusion splicer be replaced with SOC clamps?
Answer: Yes. It can be replaced with SOC clamps, please confirm the type of SOC clamps before ordering (SOC clamp is an optional accessory and needs to be purchased additionally).
Question10: How is the SOC clamp used in the heater of the fusion splicer?
Answer: We will replace the matching heater according to the type of SOC clamp.
Question11: There is a SOC clamp that needs to be equipped with a special cutter. If it can cut the normal optical fibers?
Answer: Yes. The special cutter can cut normal optical fibers.
Question12: Can the screen of fusion splicer display the types of the fiber while being spliced?
Answer: Yes. The types of the fiber can be displayed on the screen, but not 100% accurate (occurs in all brands of the fusion splicers in the world).