Optical Fiber Mux

16 E1 fiber optical multiplexer can multiplex to 16×1 multiplexer and 8 Ethernet signals for transmission over an optical fiber, resulting in reaching a longer distance without a repeaters and superior performance compared to copper media.

E1 over Fiber Optical Multiplexer provide E1 and ethernet over fiber transmission, GUI management, double power supply

Functions: ● Modularized Fiber Optical Multiplexer of 16*E1 (2.048Mb/s) channels, 2* 100Mbps Ethernet channel and a clear asynchronous RS-232 data channel ● 1+1 Optical Redundancy Backup: Provide two plug-in I/O slotsfor dual optical interface cards.Protection of dual optical interfaceavailable to ensure that business will not be interrupted. ● Flexible Configuration: Providing 4 plug-in I/O slotswhich…

Ethernet PDH Fiber Multiplexer BD-OP-8E1-4GE is the 8E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 8E1 and 4*10/100*1000M Ethernet data. The outer design use the standard 19 inches rack, so the volume is small, weight is…

Overview The 16E1 optical fiber multiplexer is 16E1 point-to-point optical transmission equipement with LCD management, The 16E1 optical fiber multiplexer transmission capacity is 16E1, 4*100M Ethernet and 2channel RS232/RS485/RS422 data. LCD management, console management, uses the FPGA chips and easy to upgrade. It is single board structure and its largest transmission capacity is 16E1, 4*100M…

Ø Provides 16 E1 transparent transmission ;

Product Description: 16 E1 fiber optical multiplexer is the 16E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 16E1. The outer design use the standard 19 inches rack, so the volume is little, weight is light and…

Description: The 8E1 fiber optical multiplexer is the 8E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 8E1 and 4*100M wire speed Ethernet data. the Ethernet bandwidth is set on base on multiple of 32K.. The outer…

4 E1 fiber optical multiplexer is the 4E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 4E1. The outer design use the standard 19 inches rack, so the volume is little, weight is light and operation is…

Ø Rate: 10/100M, full/duplex auto-negotiation

Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber,attenuation (3dbm/km)

16 E1 Fiber Optical Multiplexer with 4*ethernet

256 Phone over fiber Optical Multiplexer

4E1 fiber optical multiplexer is the 4E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 4E1. The outer design use the standard 19 inches rack, so the volume is little, weight is light and operation is convenient…

The DS3 Fiber Modem is used to provide 44.736M (T3) converter between electrical interface and optical interface of PDH network.

Product Brief BD-OP-E3 E3 Fiber Modem is an interface converter for E3 electrical and optical interface conversion. It is designed for the PDH equipment coaxial interface and optical interface interconnect. Complete loop-back facility supported for system diagnostic and commissioning. Compact casing and simple operation achieve the cost saving and investment protected. Features ● High reliability,…

V35 fiber modem extends V.35 interface service over fiber. A pair of V.35 Fiber Modems provides n*64K(n=1-32) V.35 network “extension” between remote and locations. The BD-OP-V35 is designed to transmit/receive V.35 data over one string of fiber. The BD-OP-V35 allows transmission over Single-mode fiber with distances up to 120km. LED status indicators monitor the fiber…

Fiber Voice RS232 Multiplexer provides 1 Channel telephone， 1-4*Channel E1 interface, 4*Channel 10M/100M Ethernet interface (Wire Speed 100M) and 4 expansion interface. 4*Channel Ethernet interface is switch interface, can support VLAN. 4 expansion interface can be used as the transmission channel of RS232/RS485/RS422 asynchronous data, voice signal, 2/4 line E&M audio signal, switch signal, Ethernet…