Optical Power Meter with Visual Fault Locator
Short Description:
The optical power meter (OPM) is a testing device used to accurately determine the power of an optical signal that passes through the fiber cable. OPM can also determine the amount of optical signal power loss during transmission through an optical media. Our OPM is a 2in1 device that has a built-in Visual Fault locator mostly known as VFL. The VFL is used for the detection of flaws in a fibre optic cables. It introduces bright red light over a specified range to discover flaws in single and multimode fibres. Since the continuity tester does not provide detailed information to…Description
Specification
Application
Order information
Q&A
Product Tags
Reviews
Description
The optical power meter (OPM) is a testing device used to accurately determine the power of an optical signal that passes through the fiber cable. OPM can also determine the amount of optical signal power loss during transmission through an optical media. Our OPM is a 2in1 device that has a built-in Visual Fault locator mostly known as VFL.
The VFL is used for the detection of flaws in a fibre optic cables. It introduces bright red light over a specified range to discover flaws in single and multimode fibres. Since the continuity tester does not provide detailed information to the technician as VFL does, lots of fibre technicians prefer the VFL over cable continuity tester.
Featurs
- Self Calibration
- Self Auto Off
- High Accuracy, high ,High sensitivity, high linearity-
- Stable VFL Output
- Set the REF Value
- Real-time display of the power consumption
- Interchangeable connectors: FC/ SC
- Rubber Out shell, increased the protective properties for field work
Specifications
Optical Power Meter | ![]() |
Range | Type A:-70~+10 | Type C:-50~+26 |
Wavelength | 800~1700nm | |
Calibrated Wavelength | 850/1300/1310/1490/1550/1625nm | |
Detector | InGaAs | |
Accuracy | <±3% (-10dBm/22℃) | |
Resolution | 0.01dBm | |
Working Temperature ℃ | -10~+50 | |
Storage Temperature ℃ | -20~+70 | |
Humidity | 90%(+30℃) | |
Connector | FC/SC(ST LC as optional ) | |
Power Supply | 2pcs AA batteries | |
Battery Life @ OPM | 140hours | |
Battery Life @ VFL | 50hours | |
Auto-off | 10minutes | |
Weight | 180g | |
Dimensions | 158×82×29mm | |
VFL | Wave: 650nm
Output Power: 1/10/20/30/50mw |
Detailed picture
APPLICATION
Firstly connect your fibre optic cable, then you select the required wavelength of the signal. Note: the wavelengths are already input in the system. Finally press Ok to satrt testing the optical power of the signal.