Interface Converter

Impedance-matching G703 Balun Panel solve the mismatch between UTP and coaxial cable. The baluns can be used for internal network connectivity T1/E1/CPE network transmission equipment and other applications. The 24ports balun matches 24 sets of dual 75ohm coax connections to 120ohm RJ45 connections. This feature allows network & datacom equipment manufacturers who are selling equipment…

The Coax to RJ45 24 E1 Balun Panel provides 75ohm coax (1.6/5.6 connector) to 120ohm twisted pair (RJ45 connector) conversion. The 24 ports balun panel matches 24sets of dual 75ohm (female 1.6/5.6 connector) to 120ohm (RJ45 connector) converter. This feature allows network & datacom equipment manufacturers who are selling equipment for use in Cos with…

Ethernet over E1 converter is a single port E1 with Ethernet Bridging that provides high-speed LAN-to-WAN connectivity

The IEEE C37.94 to E1 converter converts the fiber optic interface in the substation to the E1 communication link. Point to point application.

BD-2E1-IP is the new generation of the TDM over IP equipment with IP circuit emulation that supports transportation of E1 over Ethernet or IP network. The uplink ports are IEEE 802.3 compliant, 10/100BaseT auto-sensed Ethernet port. The TDMoIP device’s two uplink ports support 1+1 protection. The 2 E1 over ethernet converter can support E1 or T1 protocol,can used as E1 over ethernet converter or T1 over ethernet converter. Operators can use BD-2E1-IP to provide legacy TDM services over wired ethernet network. It is also suitable for connecting to the wireless equipment to achieve fast deployment of E1 services. One particular application is to build E1 links with low cost Wireless LAN bridges, replacing much more costly microwave radios.

As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, BD-8E1-IP 8 E1 over IP Mux adopts the innovative TDM over IP technology, it transports the legacy E1 data through the existing Ethernet or IP network.

E1 over Ethernet TDMoIP Converter that includes IP circuit emulation and can transport four E1 over an 100Base-T Ethernet or IP network.

BD-4FE1-IP adopts the innovative TDM over IP technology, it transports the legacy E1 data through the existing Ethernet or IP network. The state-of-the-art design provides the highest availability with the accurate timing signal and data bit stream reconstruction. Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving…

16 E1 over ethernet converter is used to transmit voice pseudowire TDM over IP network, point to point and point to multi-point application.

Coaxial adapter Y type connector is a specialized coaxial RF (Radio Frequency) power splitter/combiner in an adapter format, commonly known as a “Y” or “Tee” adapter. The model designation 1.6/5.6 refers to a specific sub-miniature coaxial connector series, commonly known as SMA. The numbers denote the approximate dimensions of the interface. The numbers denote the…

Coaxial adapter Y link DIN 1.6/5.6 2 male to female connector. The 1.6/5.6 coaxial adapter performs at 75Ohm up to 1 GHz. Coaxial Adapter 1.6/5.6 FEATURES Meets IEC 169-13, DIN 47295 and NFC 93-570 international specifications designed for SMT Plugs and bulkhead jacks available in crimp-crimp termination versions to insure high reliability in connector assembly…

Baudcom BD-8SER-IP is a professional 8-channel Remote IO Controller that integrates digital input (DI), relay output (DO), and analog input (AI) over Ethernet or RS485. Designed for industrial automation, building management, security systems, and IoT applications. It supports Modbus TCP, Modbus RTU, MQTT, JSON, and HTTP protocols. Featuring 12-bit ADC precision, optical isolation for DI,…

The E1 V.35 over G.SHDSL modem is a 2-wire high-performance self-learning long-range G.SHDSL industrial modem with E1 or V.35/V.24 interface. The E1 port can support BNC/75ohm and RJ45/120ohm optional. The G.SHDSL modem is a high quality and good performance modem with standard E1 or V.35/V.24 interface integrated. Its transmission distance 4Km via 2-wire at 2304Kbps.…

Ø Can realize monitor and control of remote equipment, OAM management data did not take up user’s timeslot and save E1 bandwidth

POTs over ethernet, 16channel FXS/FXO, 2*100M electrical ethernet and one optical ethernet uplink ports, consol and web management.

The Voice over Ethernet converter encapsulates the voice data in the IP packet, supports the UDP packet mode, realizes the 1-8 voice service to the 100M Ethernet conversion, in the same network segment or through the router to achieve different network segment communication. High transmit efficiency, low transmit delay. Provide Console(CLI)/WEB management interface, easy to…

The BD-VDSL-V75 5-port FE ( 2*2 )11n USB2.0 Ethernet VDSL2 Router is a versatile, high-speed remote router for home and the small office.

BD-ADSL-M23 is an ADSL/ADSL2/ADSL2+ ADSL Modem router pack deploying the latest 802.11n technology . It is designed for home and SOHO users who seek extreme mobility, high speed wireless connection and better wireless coverage while maintaining high-Level security for their Internet connection.

● Web-based management ● SNMP-based GUI EMS ● Local RS-232 CLI ● Remote in-band SNMP/TELNET management ● Firmware upgradeable via FTP or TFTP

1. Throttling Control 2. Sticky Bridge Ports 3. MAC Address Access Control List 4. IP Address Access Control List